Pilot-scale demonstration of SPORL for bioconversion of lodgepole pine to bioethanol and lignosulfonate

Haifeng Zhou,J. Y. Zhu,Roland Gleisner,Xueqing Qiu,Eric Horn,José Negrón
DOI: https://doi.org/10.1515/hf-2014-0332
2016-01-01
Holzforschung
Abstract:Abstract The process sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL) has been the focus of this study. Pilot-scale (50 kg) pretreatment of wood chips of lodgepole pine ( Pinus contorta Douglas ex Loudon) killed by mountain pine beetle ( Dendroctonus ponderosae Hopkins) were conducted at 165°C with a dilute sulfite solution of pH 2 for bioconversion to ethanol and lignosulfonate (LS). The pretreatment duration was optimized in laboratory bench scale experiments with a certain severity based on a combined hydrolysis factor (CHF). The sodium bisulfite loading was 8% and the liquor to wood ratio 3. The pretreated solids were disk milled together with the spent liquid and the resultant slurry with a 25% solids content was directly (without detoxification) submitted to a simultaneous enzymatic saccharification and fermentation (SSF) with Saccharomyces cerevisiae YRH400 at cellulase loading of 35 ml kg -1 of untreated wood. At solids loading of 20%, the alcohol yield was 288 l t -1 wood (with a final concentration of 52.2 g l -1 ), which corresponds to a 72.0% theoretical yield based on total glucan, mannan, and xylan. The LS from SPORL was highly sulfonated and its molecular weight was lower than that of a purified commercial softwood LS, and therefore it has a high potential as a directly marketable co-product.
materials science, paper & wood,forestry
What problem does this paper attempt to address?