Abstract:Dielectric elastomer(DE) is a kind of promising material bearing excellent activate properties including large deformations (up to 380%), high energy densities (up to 3.4 J/g), high efficiency, high responsive speed, good reliability and durability. Thus the DE actuator, sensors and energy harvester is widely used in the field of aeronautics and smart bionics. When an electric field is applied on the compliant electrodes of the dielectric elastomers, the polymer shrinks along the electric field and expands in the transverse plane. In consequence, the electric field becomes higher. This kind of positive feedback may cause the elastomer to thin down, resulting in an electromechanical stability. An analysis on the electromechanical stability of dielectric elastomer using arbitrary free-energy function with constant dielectric constant has been presented in Suo’s papers. In many research on the electromechanical stability analysis of DE actuator, DE’s dielectric constant is assumed to be a constant. This is only the truth if the dielectric elastomer undergoing limited deformation. Actually, a typical dielectric elastomer is a kind of crosslinked polymer. The structural symmetry of the macromolecular, the crosslinking degree, along with the tensile deformation can affect the dielectric permittivity enormously. For dielectric elastomers with higher crosslinking degree, or higher degree of molecular structural symmetry, its permittivity is relatively low. In addition, stretching can guide the macromolecule to be arranged in order, this can increase the intermolecular forces and reduce the activities of polar group, as a results, the dielectric constant will decrease. However, if the crosslinking degree is low and the deformation is well below the extension limit, the molecular units in the polymers can be polarized as freely as in a polymeric liquid. In this case the corresponding permittivity is unaffected by the deformation. Recent experimental research results also proved that the dielectric permittivity of dielectric elastomer changed while undergoing large deformation. According to Pelrine, the dielectric constant of the DE film is variable and it is a function of the area increase ratio which depends on stretch ratio. In this paper, approach for the electromechanical stability of a dielectric elastomer having variable dielectric constant is developed. The critical breakdown electric field is obtained. Simulation results proved that the prestretching process can enhance remarkably the electromechanical stability of dielectric elastomer. These results agree well with the experimental data and can be used as guidances in the design and fabrication of dielectric elastomer actuators.

Improved actuated strain of dielectric elastomer through disruption of hydrogen bonds of thermoplastic polyurethane by adding diaminonaphthalene

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Mechanisms of large actuation strain in dielectric elastomers

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Electromechanical Stability Of Dielectric Elastomer Using Electric Energy Density Function With Variable Dielectric Constant

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Improved the dielectric properties of thermoplastic polyurethane elastomer filled with MXene nanosheets and BaTiO3 nanofibers

A New Low Moduli Dielectric Elastomer Nano-Structured Composite with High Permittivity Exhibiting Large Actuation Strain Induced by Low Electric Field

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Structure and Dielectric Properties of TPU Composite Filled with CNTs@PDA Nanofibers and MXene Nanosheets

Advanced dielectric elastomer based on optimized thermoplastic polyurethane–styrene ethylene butylene styrene blend: Experiment and simulation

Strain Effect on Dielectricity of Elastic Thermoplastic Polyurethanes

Constructing Advanced Dielectric Elastomer Based on Copolymer of Acrylate and Polyurethane with Large Actuation Strain at Low Electric Field

Plasticized Thermoplastic Polyurethanes for Dielectric Elastomers with Improved Electromechanical Actuation

Disclosed Dielectric and Electromechanical Properties of Hydrogenated Nitrile–butadiene Dielectric Elastomer

Improving Electromechanical Strain of Polyurethanes Via Optimizing Electric Field Ramp Rate and Actuator Size

Significantly enhancing electro-actuation performance of dielectric elastomer with ZrO2 nanoparticles

Increased Electroaction Through a Molecular Flexibility Tuning Process in TiO2–polydimethylsilicone Nanocomposites

Improved electro‐actuation property of dielectric elastomer composites regulated by one‐dimensional CaCu3Ti4O12@TiO2 core–shell construction