Abstract:Reducing the weight of floor beams is a promising way to carry out the lightweight design of the rack car body. However, the reduction will generally amplify the vibration of the car body chassis transmitted to the floor and cause a decrease in riding comfort. Moreover, the lightweight design of the rack floor beams still depends on engineer's experiences. To address the issues, a cross-section layout method combing bionic with multi-objective topology optimization was proposed. According to the method, a novel bionic layout of rack floor beams offering out-standing reducing weight, vibration performance, in which the configuration elements of bionic quasi-ellipses replaced traditional straight lines in their cross-sections, was proposed. Firstly, a finite element modeling under multiple load cases for rack floor beams was built. Secondly, we screened an optimal load path using a multi-objective topology optimization method considering modal factors, and then constructed a novel bionic layout of cross-sections from beetles. Subsequently, considering minimizing the total mass (M) while maximizing the first-order vertical bending modal frequency (FVBMF) as two optimization objectives, a surrogate-based multi-objective genetic algorithm (SMOGA) and the technique for order of preference by similarity to ideal solution (TOPSIS) were then utilized in sequence to construct the surrogate models, solve optimization process for geometrical parameters of the cross-section, and identify the best trade-off design. Moreover, the multi-objective geometrical parameter optimization under multiple load cases were investigated. The results show that the parameter tt has a more significant influence on the mass and modality of floor beams, and the parameter should be less than 80 mm under single load cases (SLCs). Finally, the dynamic and static performance comparison of the proposed cross-section with the traditional cross-section were also performed. The weight of the optimum outcomes is reduced by 13.25 and the 1-order vertical natural frequency is significantly increased by 48.04 . The results show that the proposed floor beams have significant modal performance and better weight reduction.

Box Girder Optimization by Orthogonal Experiment Design and GA-BP Algorithm in the Gondola Car Body

On Sectional Properties Correction of Grillage Model of Composite Bridges with Multi-box Girder

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Static Control Method Using Gradient—genetic Algorithm for Grillage Adaptive Beam String Structures Based on Minimal Internal Force

Optimization of Baja Racing Car Frame Based on GA/MOGA/SA Algorithm and Experimental Research on Bending-torsional Stiffness of Frame

Structural Design and Optimization in the Beam of a Five-axis Gantry Machining Center

A new cross-section layout method and geometrical parameter optimization for floor beams of rack car body considering modal factors

Optimizing the static–dynamic performance of the body-in-white using a modified non-dominated sorting genetic algorithm coupled with grey relational analysis

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Experimental study on stability of orthotropic steel box girder of self-anchored suspension cable-stayed bridge

An adaptive multi-objective optimization method for structure-connection-performance design of commercial vehicle cab

Multi‐Objective Optimization for the Cross Brace of a Computer Numerical Control Gantry Machine Tool Based on Intelligent Algorithms

Multi-Objective Lightweight Optimization of Parameterized Suspension Components Based on NSGA-II Algorithm Coupling with Surrogate Model

Structural Optimization Design of Dual Robot Gripper Unloading Device Based on Intelligent Optimization Algorithms and Generative Design

Analysis for Stress Characteristics and Structural Parameters Optimization in Orthotropic Steel Box Girders based on Fatigue Performance

Reliability-based design optimization of 3D orthogonal woven composite automobile shock tower

Nonlinear Optimization of Orthotropic Steel Deck System Based on Response Surface Methodology

RBF-Based Integrated Optimization Method of Structural and Turning Parameters for Low-Floor Axle Bridge

Strength Analysis and Optimal Design for Main Girder of Double-Trolley Overhead Traveling Crane Using Finite Element Method

Optimizing the construction procedures of large-span structures based on a real-coded genetic algorithm

Mass Optimization of Crane Box Girder Considering Both Ribs and Diaphragms using APDL