Abstract:Polycrystalline ZnS is a typical infrared optical material. It is widely used in advanced optical systems due to its excellent optical properties. The machining accuracy of polycrystalline ZnS optical elements must satisfy the requirements of high-performance system development. However, the soft and brittle nature of the material poses a challenge for high-quality and efficient machining. In recent years, in situ laser-assisted diamond cutting has been proven to be an effective method for ultra-precision cutting of brittle materials. In this study, the mechanism of in situ laser-assisted cutting on ultra-precision cutting machinability enhancement of ZnS was investigated. Firstly, the physical properties of ZnS were characterized by high-temperature nanoindentation experiments. The result revealed an increase in ductile machinability of ZnS due to plastic deformation and a decrease in microhardness and Young's modulus at high temperatures. It provided a fundamental theory for the ductile–brittle transition of ZnS. Subsequently, a series of diamond-cutting experiments were carried out to study the removal mechanism of ZnS during in situ laser-assisted cutting. It was found that the mass damage initiation depth groove generated by in situ laser-assisted cutting increased by 57.99% compared to the groove generated by ordinary cutting. It was found that micron-sized pits were suppressed under in situ laser-assisted cutting. The main damage form of HIP-ZnS was changed from flake spalling and pits to radial cleavage cracks. Additionally, the laser can suppress the removal mode difference of different grain crystallographic and ensure the ductile region processing. Finally, planning cutting experiments were carried out to verify that a smooth and uniform surface with Sa of 3.607 nm was achieved at a laser power of 20 W, which was 73.58% better than normal cutting. The main components of roughness were grain boundary steps and submicron pit. This study provides a promising method for ultra-precision cutting of ZnS.

Surface Integrity Evolution of Zirconium-Based Metallic Glass Multi-Cut with Wire Electrical Discharge Machining

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Effects of processing parameters on the surface roughness of Zr-based bulk metallic glass processed by wire electrical discharge machining

A Hybrid Process of Electrochemical Discharge Machining (ECDM) and High-Speed Milling (HSM) on Quartz Glass

Numerical and experimental study on EDM drilling of Ti-Cu-Zr metallic glass considering energy efficiency

Study on the material removal mechanism and the exit breakage of ultrasonic vibration-assisted grinding for microcrystalline glass

Laser polishing and simultaneous hardening of the electrical discharge machined Zr-based metallic glass surface

Understanding the Abnormal Effects of Ultrasonic Vibration on Tool Wear and Surface Generation in Zr-based Bulk Metallic Glass Cutting

Surface Integrity Associated with SiC/Al Particulate Composite by Micro-Wire Electrical Discharge Machining

Machining mechanism research of glass by discrete element method

Traditional and non-traditional machining technology of metallic glass

Machinability: Zirconia-reinforced lithium silicate glass ceramic versus lithium disilicate glass ceramic

Influence of Open-Circuit Voltage on High-Speed Wire Electrical Discharge Machining of Insulating Zirconia

Subsurface Damage Depth and Distribution in Rotary Ultrasonic Machining and Conventional Grinding of Glass Bk7

Research progress on cutting machining simulation technology of metallic glasses

Grain Refinement-Induced Machined Surface Quality Promotion in Ultrasonic Vibration-Assisted Polycrystalline Diamond Cutting of Polycrystalline Cu

Reducing the cutting tool wear in diamond turning of Zerodur glass-ceramic by the mechanical cleaning effect of ultrasonic vibration assistance

Investigation on the Machinability of Polycrystalline ZnS by Micro-Laser-Assisted Diamond Cutting

Cutting Model Considering Damage Layer Thickness for Ultra-Precision Turning of Quartz Glass

Machining behaviors of glass-ceramics in multi-step high-speed grinding: Grinding parameter effects and optimization

Experimental study on the evolution process of Zr702 microdimple array generated with masked jet electrochemical machining