Abstract:Self-compacted concrete (SCC) is a special type of concrete; it is a liquid mixture appropriate for structural elements with excessive reinforcement without vibration. SCC is commonly produced by increasing the paste volume and cement content. As cement production is one of the huge factors in releasing CO2 gas into the atmosphere, by-product materials such as fly ash are utilized as a cement replacement in concrete. In addition to the positive environmental impact, fly ash can maintain an excellent fresh and mechanical property. Incorporating fly ash into self-compacted concrete is widely applied in practice. However, its application is frequently limited by a lack of knowledge about the mixed material gained from laboratory tests. The most significant mechanical property for all concrete types is compressive strength (CS); also, the slump flow diameter (SL) in the fresh state is a crucial property for SCC. Hence, developing an accurate and reliable model for predicting the CS and SL is very important for saving time and energy, as well as lowering the cost. This research study proposed a projection of both the CS and SL of SCC modified with fly ash by three different model approaches: Nonlinear regression (NLR), Multi-Linear regression (MLR), and Artificial Neural Networks (ANN). In this regard, two different datasets were collected and analyzed for developing models: 308 data samples were used for predicting the CS, and 86 data samples for the SL. Each database included the same five independent parameters. The ranges for CS prediction were: cement (134.7–583 kg/m3), water-to-binder ratio (0.27–0.9), fly ash (0–525 kg/m3), sand (478–1180 kg/m3), coarse aggregate (578–1125 kg/m3), and superplasticizer (0–1.4%). The dependent parameter (CS) ranged from 9.7 to 81.3 MPa. On the other hand, the data ranges for the SL prediction included independent parameters such as cement (83–733 kg/m3), water-to-binder ratio (0.26–0.58), fly ash (0–468 kg/m3), sand (624–1038 kg/m3), coarse aggregate (590–966 kg/m3), and superplasticizer (0.087–21.84%). Also, the dependent parameter (SL) ranged from 615 to 800 m. Various statistical assessment tools, such as the coefficient of determination (R2), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Objective value (OBJ), and Scatter Index (SI), were used to evaluate the performance of the developed models. The results showed that the ANN model best predicted the CS and SL of SCC mixtures modified with fly ash. Furthermore, the sensitivity analysis demonstrated that the cement content is the most effective factor in predicting the CS and SL of SCC mixtures.

Implementing The Multi Expression Programming, Nonlinear Regression, Artificial Neural Network, and M5P-Tree Models to Predict The Long-Term of Compressive Strength of Cement- Mortar Modified With Fly Ash

Forecasting the strength of micro/nano silica in cementitious matrix by machine learning approaches

Systematic multiscale models to predict the compressive strength of fly ash-based geopolymer concrete at various mixture proportions and curing regimes

Statistical Methods for Modeling the Compressive Strength of Geopolymer Mortar

Predictive Regression Models for the Compressive Strength of Fly Ash-based Alkali-Activated Cementitious Materials via Machine Learning

The efficiency of hybrid intelligent models to evaluate the effect of the size of sand and clay metakaolin content on various compressive strength ranges of cement mortar

Multivariable models including artificial neural network and M5P-tree to forecast the stress at the failure of alkali-activated concrete at ambient curing condition and various mixture proportions

Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio

Soft Computing and Machine Learning-Based Models to Predict the Slump and Compressive Strength of Self-Compacted Concrete Modified with Fly Ash

Multiscale Models to Evaluate the Impact of Chemical Compositions and Test Conditions on the Mechanical Properties of Cement Mortar for Tile Adhesive Applications

The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model

Artificial neural network modeling for the effect of fly ash fineness on compressive strength

Analytical and innovative modeling investigations on the performance of nanoparticle-modified self-compacting mortars

Utilizing Artificial Neural Network and Multiple Linear Regression to Model the Compressive Strength of Recycled Geopolymer Concrete

A Hybrid Model Based on LSTM-CNN Combined with Attention Mechanism for MPC Concrete Strength Prediction

Synergistic effects of supplementary cementitious materials and compressive strength prediction of concrete using machine learning algorithms with SHAP and PDP analyses

Evaluation of mechanical properties of cement mortars containing pond ash as partial replacement of river sand and prediction of properties by regression models

Theoretical models to evaluate the effect of SiO2 and CaO contents on the long-term compressive strength of cement mortar modified with cement kiln dust (CKD)

Innovative modeling techniques including MEP, ANN and FQ to forecast the compressive strength of geopolymer concrete modified with nanoparticles

A Novel Strength Prediction Model of Mortars with Different Types of Cement and SCMs

Mortar with fly ash as a partial cement replacement: Analysing the compressive strength and heat of hydration