Abstract:This paper presents one of the first attempts of indirect Bridge Health Monitoring (BHM) for cable damage identification in a cable-stayed bridge. The premise of the work is to identify the location and the severity of a sustained structural damage to the cables, measured solely by vibration response of a moving vehicle passing over the bridge. To this aim, new formulations of dynamic coupling between the vehicle and the bridge are developed, utilizing finite element (FE) approach and validated. Further, the proposed framework to obtain the Vehicle-Bridge Interaction (VBI) is extended to a large-scale cable-stayed bridge. Various damage cases, caused by a partial and incremental change in structural stiffness of cables, being representative of gradual sectional loss due to corrosion, are taken into account. A damage index based on the Empirical Mode Decomposition (EMD) scheme is presented, and through extensive numerical investigations, it is demonstrated that under certain vehicle parameters the vehicle vibration response not only is capable of identifying the suffered damage to the bridge, but also is able to identify the damage location, and further to assess its severity. The contributions of the work are fourfold: (1) Many of the existing studies only focus on the simplified models of the bridge based on a simply supported Euler–Bernoulli beam theory; however, this paper extends the VBI framework to a three-dimensional numerical model of a large-scale bridge structure, being rarely reported in the BHM context. (2) The validation of the technique is demonstrated through extensive numerical investigations on a statically indeterminate cable-stayed bridge. (3) Successful detection, localization and assessment of damage to the cables are obtained using realistic range of vehicle parameters without any bridge response measurements. (4) Through extensive parametric study, the significance of various parameters on the effectiveness of the proposed approach is carefully investigated and discussed.

A Review of Indirect Bridge Monitoring Using Passing Vehicles

Vehicle-Assisted Techniques for Health Monitoring of Bridges

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Effectiveness of Drive‐By Monitoring in Short‐Span Bridges: A Real‐Scale Experimental Evaluation

A Vehicle Bridge Interaction based approach for the monitoring of bridges through an electric mobile platform

Monitoring bearing damage in bridges using accelerations from a fleet of vehicles, without prior bridge or vehicle information

Using Drive-by Health Monitoring to Detect Bridge Damage Considering Environmental and Operational Effects

Experimental verification of a data-driven algorithm for drive-by bridge condition monitoring

Bridge Modal Identification using Acceleration Measurements within Moving Vehicles

Challenges in Bridge Health Monitoring: A Review

Bridge health monitoring using deflection measurements under random traffic

Review of Vehicle Scanning Method for Bridges from 2004 to 2024

Laboratory Investigation on Detecting Bridge Scour Using the Indirect Measurement from a Passing Vehicle

Drive-by-bridge inspection for damage identification in a cable-stayed bridge: Numerical investigations

A Machine Learning Approach to Bridge-Damage Detection Using Responses Measured on a Passing Vehicle

The influence of vehicle dynamics on the time-dependent resonances of a bridge

Using limited roving sensors to monitor bridge subjected to random traffic load

In‐fleet structural health monitoring of roadway bridges using connected and autonomous vehicles' data

Bridge health monitoring system based on vibration measurements

Effectiveness of Vibration-Based Techniques for Damage Localization and Lifetime Prediction in Structural Health Monitoring of Bridges: A Comprehensive Review