Abstract:All-solid-state lithium batteries (ASSB) have emerged as key components in energy storage applications owing to their superior safety characteristics and high energy density. The use of sulfide solid electrolytes has considerably promoted the development of all-solid-state lithium batteries because of advantages such as a high ionic conductivity, formability, and good interface compatibility with electrodes. In this review, we first discuss the issues hindering the use of sulfide-based all-solid-state lithium batteries, focusing on aspects related to the cathode/electrolyte interface, sulfide solid electrolytes, and the anode/electrolyte interface. At the cathode/electrolyte interface, interfacial side reactions inherently occur due to the narrow electrochemical window of sulfide electrolytes when used with high-voltage cathode materials, which degrades the battery performance. In addition, owing to the chemical potential difference between cathode materials and sulfide solid electrolytes, the space-charge layer generated due to the formation of a lithium depletion layer is also detrimental to the cell performance. To overcome these difficulties, inert coatings, replacing sulfide solid electrolytes with halide solid electrolytes, and replacing frequently used transitional metal oxide cathode materials with other materials that are better suited for sulfide solid electrolytes to modify the composite cathode have been explored. Improvements in the ionic conductivity and air stability are imperative for sulfide solid electrolytes. Strategies to optimize the solid electrolyte have mainly focused on doping or adjusting the synthesis routes of the sulfide solid electrolyte, which have resulted in notable improvements. At the anode/electrolyte interface, lithium dendrite formation and interfacial reactions between lithium metal and the sulfide solid electrolyte are the most notable challenges. Using artificial solid electrolyte interfaces with a low electronic conductivity, employing an alloy anode, and synthesizing composite electrolytes are typical approaches for overcoming these problems. In addition, from the perspective of the practical production of sulfide-based all-solid-state lithium batteries, electrode/electrolyte membrane-forming technology and the assembly of pouch cells are introduced. Membrane-forming technology has gained extensive attention with the aim of fabricating thin and mechanically stronger solid electrolyte membranes. High-loading cathode membranes as well as solid electrolyte membranes, dry processing, and wet processing are reviewed. Moreover, the improvement in the solid-solid contact of pouch cells, the design of high-loading cathodes, and the low-cost and scaled up production of sulfide solid electrolytes are introduced. Finally, we also propose research directions and future development trends for sulfide-based all-solid-state lithium batteries.

Design of an Automated Assembly Station for Process Development of All-Solid-State Battery Cell Assembly

Automated electrolyte formulation and coin cell assembly for high-throughput lithium-ion battery research

(Invited) Advanced Electrode Processing for Next Generation Batteries

Insights Into Scalable Technologies and Process Chains for Sulfide‐Based Solid‐State Battery Production

Electrolyte melt infiltration for scalable manufacturing of inorganic all-solid-state lithium-ion batteries

Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

Lithium-ion battery cell formation: status and future directions towards a knowledge-based process design

Research and Demonstration Center for the Production of Large-Area Lithium-Ion Cells

Challenges and Prospects of All‐Solid‐State Electrodes for Solid‐State Lithium Batteries

A Computational Workflow for the Simulation of Solid State Battery Electrodes from Manufacturing to Electrochemical Performance

From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing.

Processing of Advanced Battery Materials—Laser Cutting of Pure Lithium Metal Foils

Automated assembly of Li-ion vehicle batteries: A feasibility study

Benchmarking of High Capacity Battery Module/Pack Design for Automatic Assembly System

Anode Interface in All-Solid-state Lithium-Metal Batteries: Challenges and Strategies

Forming Artificial Solid-Electrolyte-Interfaces between Lithium Metal Anodes and Halide and Sulfide Solid Electrolytes in All-Solid-State-Batteries Via Spatial-Atomic-Layer-Deposition

Processing and manufacturing of next generation lithium-based all solid-state batteries

Designing High-Performance Sulfide-Based All-Solid-State Lithium Batteries: from Laboratory to Practical Application

Interface Aspects in All‐Solid‐State Li‐Based Batteries Reviewed

Smart Construction of Intimate Interface Between Solid Polymer Electrolyte and 3D-Array Electrode for Quasi-Solid-state Lithium Ion Batteries