Abstract:Low-speed aerodynamics has gained increasing interest due to its relevance for the design process of small flying air vehicles. These small aircraft operate at similar aerodynamic conditions as, e.g. birds which therefore can serve as role models of how to overcome the well-known problems of low Reynolds number flight. The flight of the barn owl is characterized by a very low flight velocity in conjunction with a low noise emission and a high level of maneuverability at stable flight conditions. To investigate the complex three-dimensional flow field and the corresponding local structural deformation in combination with their influence on the resulting aerodynamic forces, time-resolved stereoscopic particle-image velocimetry and force and moment measurements are performed on a prepared natural barn owl wing. Several spanwise positions are measured via PIV in a range of angles of attack [Formula: see text] 6° and Reynolds numbers 40 000 [Formula: see text] 120 000 based on the chord length. Additionally, the resulting forces and moments are recorded for -10° ≤ α ≤ 15° at the same Reynolds numbers. Depending on the spanwise position, the angle of attack, and the Reynolds number, the flow field on the wing's pressure side is characterized by either a region of flow separation, causing large-scale vortical structures which lead to a time-dependent deflection of the flexible wing structure or wing regions showing no instantaneous deflection but a reduction of the time-averaged mean wing curvature. Based on the force measurements the three-dimensional fluid-structure interaction is assumed to considerably impact the aerodynamic forces acting on the wing leading to a strong mechanical loading of the interface between the wing and body. These time-depending loads which result from the flexibility of the wing should be taken into consideration for the design of future small flying air vehicles using flexible wing structures.

Aerodynamic Performance of a Low Aspect Ratio Active Rear Wing Package Designed for the OSU Formula SAE Team

Design and aerodynamics analysis of rear wing formula student car using 3 dimension CFD (computational fluid dynamics)

Computational fluid dynamics analysis for an active rear-wing design to improve cornering speed for a high-performance car

Design and CFD Analysis of a Rear Wing of a Motorsport Car

Numerical investigation on the effect of rear wing on aerodynamic performance of race car

Deflection of Formula One Race Car Rear Wing using Numerical Simulations

A CFD-Based Collaborative Approach for Box-Wing Aircraft Aerodynamic Assessment: The PARSIFAL Study Case

Wake Dynamics of Finite Aspect Ratio Wings. Part I: an Experimental Study

Virtual Test for the Effect of Rear Wing Attack Angle on the Performance of Formula SAE Car

Combined particle-image velocimetry and force analysis of the three-dimensional fluid-structure interaction of a natural owl wing

Analyzing the Dynamic Behavior of a High Aspect Ratio Wing Incorporating a Folding Wingtip

Numerical Study of the Sports Car Aerodynamic Enhancements

Studying Forces on Three Different Designs of Formula 1 Front Wing

EXPERIMENT AND ANALYSIS OF AERODYNAMIC PERFORMANCE FOR CAS THIN AIRFOILS USED OF WIND TURBINE BLADES

Research on Crosswind Stability of FSAE Racing Car with Rear Wing at Different Attack Angles

CFD Analysis of the Influence of the Front Wing Setup on a Time Attack Sports Car’s Aerodynamics

Numerical Investigations on Nonaxisymmetrical End Wall Profiling and Aerodynamic Performance of a Low Aspect Ratio Cascade

Wake Dynamics of Finite Aspect Ratio Wings. Part II: Computational Study

Numerical Simulation of Unsteady Aerodynamic Performance of Novel Adaptive Airfoil for Vertical Axis Wind Turbine

Absolute Nodal Coordinate Formulation With Vector-Strain Transformation for High Aspect Ratio Wings

Static Aeroelastic Optimization of High-Aspect-Ratio Composite Aircraft Wings via Surrogate Modeling