Abstract:This study investigates the aerodynamic behavior of a high-performance vehicle and the interaction with its rear wing in straight-line and steady-state cornering conditions. Analyses are performed with Reynolds-averaged Navier–Stokes based computational fluid dynamics simulations using a moving reference frame and overset mesh technique, validated against moving ground wind tunnel experiments. The results indicate a significant 20% decrease in downforce and 35% increase in drag compared to straight-line conditions at the smallest considered corner radius of 2.9 car-lengths. Downforce losses primarily stem from performance deficits on the underbody and rear wing, alongside elevated upper body lift. Drag penalties mainly result from additional pressure drag induced by a recirculation wake vortex generated behind the vehicle's inboard side. The vehicle's lateral pressure distribution is also affected, introducing a centripetal force that increases with smaller corner radii. Additionally, analyses of the rear wing reveal alternations of its aerodynamic characteristics in cornering, particularly impacting vortical flow and suction on the lower surface. Throughout the operating conditions, the rear wing's individual downforce contribution falls off beyond its stall angle. At higher angles of attack, the rear wing primarily generates downforce by pressurizing the vehicle's upper surfaces, but its interaction with the near-wake leads to a substantially increased pressure drag. Overall, these findings provide crucial insights into the intricate aerodynamic interactions of high-performance vehicles in diverse operating conditions as well as form an essential foundation for future research on static and active aerodynamic designs in the pursuit to optimize vehicle performance in dynamic driving conditions.

CFD Analysis of the Influence of the Front Wing Setup on a Time Attack Sports Car’s Aerodynamics

Numerical investigation on the effect of rear wing on aerodynamic performance of race car

Numerical Study of the Sports Car Aerodynamic Enhancements

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

Studying Forces on Three Different Designs of Formula 1 Front Wing

Numerical study of flow past an axisymmetric body with a ring wing at various attack angles

Effects of cornering conditions on the aerodynamic characteristics of a high-performance vehicle and its rear wing

Design and CFD Analysis of a Rear Wing of a Motorsport Car

Design and aerodynamics analysis of rear wing formula student car using 3 dimension CFD (computational fluid dynamics)

Computational fluid dynamics analysis for an active rear-wing design to improve cornering speed for a high-performance car

CFD Analysis of the Location of a Rear Wing on an Aston Martin DB7 in Order to Optimize Aerodynamics for Motorsports

Deflection of Formula One Race Car Rear Wing using Numerical Simulations

Evaluation of wind tunnel interference on numerical prediction of wheel aerodynamics

Aerodynamics Analysis of UniMAP Automotive Racing Team Formula SAE Race Car spoiler via Simulation: Effect of Angle of Attack

Aerodynamic Influence Over Leading and Pursuing Motorcycles Equipped With Downforce-Generation Wings

Aerodynamic Design and Performance Research of Racing Cars with Adaptive Control of Attitude

On the aerodynamic effects of the optimised DrivAer fastback model car under adverse situations

Reliable method of aerodynamic analysis using computational fluid dynamics and scaled models in the development process of a Very Light Airplane

Aerodynamic drag reduction of a simplified squareback vehicle using steady blowing

Wake Structures and Surface Patterns of the DrivAer Notchback Car Model under Side Wind Conditions

The influence of gurney flap to the stability of formula car rear wing with simulation