Abstract:The rotating detonation combustor is investigated as a potential implementation of pressure-gain combustion. Achieving net pressure-gain has proven to be extremely challenging in most combustors reported in the literature, regardless of their operating parameters. The performance losses observed in rotating detonation, compared to ideal predictions, can be attributed to mechanisms such as vitiation by residual burnt gases, partial detonation, and pre-combustion of reactants. The literature frequently discusses the impact of these mechanisms on measurable properties such as thrust and wave speed, but their effects on the front structure have not been fully understood. This study proposes using the rotating detonation structure for the first time to evaluate the vitiation quantitatively. The front structure of a compressed natural gas — oxygen-fueled rotating detonation is characterized using broadband chemiluminescence, and properties such as oblique shock angle, expansion angle, and front height are reported. The experimental values are then compared to the ideal predictions derived based on mass flow rates. The experimental front heights are found to be much higher than their ideal predicted counterparts. Analytical calculations that include pre-burning and vitiation show an increase in front height and a reduction in expansion angle, consistent with the chemiluminescence levels observed. The vitiated mass fraction is then deduced from the experimental front height, and the remaining velocity deficit is then used to evaluate the partial detonation mass fraction. Vitiated front angles compare favorably to the predicted values. Novelty and Significance This study reports high-quality chemiluminescence imaging of natural gas/oxygen rotating detonation front enabling the measurement of critical geometrical front features such as the front height, oblique shock angle, and expansion angle. The conventional front mass flow rate balance is extended to account for the re-circulation of burnt gases effects and is used to estimate the experimental vitiation. Most notably, vitiation of the fresh mixture, which was already known to reduce front speed and pressure rise, is also shown to strongly decrease the expansion angle resulting in further losses of axial thrust.

Effect of Fuel Injection Location on Operability and Performance of a Continuously Variable Geometry Rotating Detonation Engine

Experimental Setup of Combustion Visualization Inside a Heavy-Duty Diesel Engine Converted to Natural-Gas Spark-Ignition Operation

Continuous Injector Geometry Variation to Augment Rotating Detonation Combustor Operation and Performance

Injection Studies on a Small-Scale Rotating Detonation Engine

Experimental Investigation of a Cylindrical Air-Breathing Continuous Rotating Detonation Engine with Different Nozzle Throat Diameters

Performance of Rotating Detonation Engines for Air Breathing Applications

Overview of Performance, Application, and Analysis of Rotating Detonation Engine Technologies

Experimental study on the rotating detonation engine based on a gas mixture

Experimental Investigation of Pulse Detonation Combustion Characteristics via Atomizer Geometry

The Effect of the Throat Width of Plug Nozzles on the Combustion Mode in Rotating Detonation Engines

Effect of the Inlet Spatial Fluctuation on the Gas–solid Continuous Rotating Detonation Flow Field Characteristics

Experimental Investigation on H 2 / O 2 Continuously Rotating Detonation Engine

Structure of rotating detonation in mixtures of natural gas and oxygen

Performance of Rotating Detonation Engine with Stratified Injection

Computational Study of Fluidic-Valve Injectors for Detonation Engines

Numerical Study of the Effects of Injection Conditions on Rotating Detonation Engine Propulsive Performance

Shock Propagation Through a Square Injector: Investigation into Rotating-Detonation Engine Injector Dynamics

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies

Experimental verification of cylindrical air-breathing continuous rotating detonation engine fueled by non-premixed ethylene

Experimental Study of the Performance of a Rotating Detonation Engine with Nozzle

Evaluation of a computational strategy to model transitory injection in rotating detonation combustors