Abstract:The development of green and renewable materials has attracted increasing attention in recent years. Hence, biocomposite-based packaging materials have been investigated to replace petrochemical materials in several industries, such as the food packaging and electronics packaging industries. The tensile and thermal properties of biocomposite-based packaging materials composed of polylactic acid and plant fiber were mainly investigated in the current literature, but fewer studies on the improvement of water resistance and water vapor/oxygen barrier properties of composite materials were performed. Herein, we describe a composite film comprising TBFP [a mixture of bamboo fiber powder (BFP) and silica aerogel powder] that was combined with modified polylactic acid (MPLA) in a melt-mixing process. The structure, morphology, tensile strength, thermal properties, water absorption properties, water vapor/oxygen barrier effect, cytocompatibility, and biodegradability of the composites were characterized. MPLA and TBFP improved the properties of these composites. Fourier transform infrared and X-ray diffraction spectra have shown interfacial adhesion of MPLA/TBFP, resulting in a tighter structure. Hence, the MPLA/TBFP composite had higher elongation at failure (ε), tensile strength at failure (δ), Young's modulus (E), initial decomposition temperature at 5 wt % loss (T5%), residual yields, oxygen transmission rate, contact angles, lower thermal conductivity (k) values, water vapor transmission rate, and water absorption and biodegradability compared with PLA and PLA/BFP. It indicates that the MPLA/TBFP composites exhibited more favorable tensile strength, water resistance, and water vapor/oxygen barrier than the PLA and PLA/BFP composites. Cell growth analysis showed that the MPLA/TBFP and PLA/BFP composites own good cytocompatibility. Moreover, the biodegradability of the PLA/BFP and MPLA/TBFP composites increased with the filler (BFP or TBFP) concentration. Because of these improvements in their properties, composites can be used as packing materials in many perspectives.

Preparation and Properties Study of PVA/Bamboo Cellulose Composite Membrane

Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo-char

Impact Response of Bamboo-Plastic Composites with the Properties of Bamboo and Polyvinylchloride (PVC)

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

Effect of Hydrothermal Pretreatment on the Properties of Moso Bamboo Particles Reinforced Polyvinyl Chloride Composites

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Study on the preparation and performance of calcium alginate/gelatin composite membranes

Preparation and Mechanical Properties of Layered Bc Nano-Cellulose Membrane/Pva Composite Hydrogels

Hydrophilic Nanofiber of Bacterial Cellulose Guided the Changes in the Micro-Structure and Mechanical Properties of Nf-Bc/pva Composites Hydrogels

Reinforcing the mechanical properties of bamboo fiber/low density polyethylene composites with modified bamboo-woven structure

Preparation and Characterization of Pol(vinyl Alcohol）/ Cellulose Nanocomposites

Preparation and characterization of micro/nanocellulose reinforced PVDF/wood composites

PREPARATION OF PVA COMPOSITE MEMBRANES AND STUDIES ON ANTIFOULING PROPERTY

Preparation and mechanical properties of regenerated cellulose/poly(vinyl-alcohol) physical composite hydrogel

Reinforcing and Toughening Effects of Bamboo Pulp Fiber on Poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) Fiber Composites

Rice straw cellulose microfiber reinforcing PVA composite film of ultraviolet blocking through pre-cross-linking

Molecular simulation of the effects of water on the interface of plant fiber/polyvinyl alcohol (PVA) composites prepared by dry preparation method (DPM)

Preparation and Characterization of Polylactic Acid/Bamboo Fiber Composites.

Preparation of Electrospun Polyvinyl Alcohol/Nanocellulose Composite Film and Evaluation of Its Biomedical Performance

Thermomechanical Properties of Jute/Bamboo Cellulose Composite and Its Hybrid Composites: The Effects of Treatment and Fiber Loading

Fabrication and evaluation of melamine-formaldehyde resin crosslinked PVA composite coating membranes with enhanced oxygen barrier properties for food packaging