Abstract:The utilization of laser shock peening (LSP) in laser powder bed fused (LPBF) stainless steel (SS) 316L components enhances the mechanical characteristics and operational lifespan of the product quality through a significant reduction of residual stress and a noticeable increase in roughness parameters. The key objective of the study is to analyze the influence of consecutive laser shock peening (LSP) without ablative coating and low pulse energy on the surface properties, residual stress distribution, and microhardness of samples produced by LPBF with SS316L material. The surface quality of the sample subjected to consecutive laser shock peening shows a slight deterioration in its condition. This can be attributed to the combined impact of ablative surface and surface damage resulting from the production of high-energy plasma. However, the implementation of successive LSP results in a distinctive enhancement of compressive residual stresses (CRS) that are evenly distributed throughout the central axis and sharp edges. In contrast, the as-built condition exhibits non-uniform stress magnitudes. CRS observed in each LSP iteration exhibits a notable increase, reaching a maximum magnitude of -389 MPa compared to the initial stress level of 165 MPa in the as-built sample. This enhancement can be attributed to the repetitive impact of shock waves on the surface, leading to the formation of plastic deformation. The refinement of surface grains and the presence of favorable residual stresses were proven by the utilization of X-ray diffraction (XRD) studies and the Cos α plot. The XRD investigation also indicated the absence of any newly formed phases or secondary phases. A significant enhancement in microhardness was observed, with an increase of 58.3% achieved after the third consecutive peening process. The successive LSP samples displayed a gradual improvement in electrochemical behavior. Though the amplitude parameters increased after LSP, the increase in wear rate was observed.

A Hybrid Laser Surface Treatment for Refurbishment of Stress Corrosion Cracking Damaged 304L Stainless Steel

Femtosecond Laser Treatment for Improving the Corrosion Resistance of Selective Laser Melted 17-4PH Stainless Steel

Influence of Surface Modifications by Laser Shock Processing on the Acid Chloride Stress Corrosion Cracking Susceptibility of AISI 304 Stainless Steel

Prevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser Peening

Enhance corrosion resistance of 304 stainless steel using nanosecond pulsed laser surface processing

Characterization of a Laser Surface-Treated Martensitic Stainless Steel

Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure

Stress Corrosion Cracking Susceptibility of 304 Stainless Steel Subjected to Laser Shock Peening Without Coating

Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments

Laser Shock Peening and its Applications: A Review

The impact of successive laser shock peening on surface integrity and residual stress distribution of laser powder-bed fused stainless steel 316L

Laser peening induced mitigation of severe pitting corrosion in titanium stabilized 321 steel

Laser surface pretreatment of stainless steel

Wear and corrosion behaviors of high-power laser surface-cleaned 304L stainless steel

Investigation on repairing 30CrMnSiNi2A steel with laser additive and subtractive hybrid remanufacturing technology

An Approach to Reduce Stress and Defects: a Hybrid Process of Laser Cladding Deposition and Shot Peening

Laser surface treatments to improve the intergranular corrosion resistance of 18/13/Nb and 304L in nitric acid

Surface Treatment and Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting

Nanosecond Laser Fabrication Of Superhydrophobic Surface On 316l Stainless Steel And Corrosion Protection Application

Laser surface cladding of stainless steel to substitute environmentally hazardous hard chrome plating

Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints