Abstract:This study investigates an electrochemical approach for the treatment of water polluted with per- and poly-fluoroalkyl substances (PFAS), looking at the impact of different variables, contributions from generated radicals, and degradability of different structures of PFAS. Results obtained from a central composite design (CCD) showed the importance of mass transfer, related to the stirring speed, and the amount of charge passed through the electrodes, related to the current density on decomposition rate of PFOA. The CCD informed optimized operating conditions which we then used to study the impact of solution conditions. Acidic condition, high temperature, and low initial concentration of PFOA accelerated the degradation kinetic, while DO had a negligible effect. The impact of electrolyte concentration depended on the initial concentration of PFOA. At low initial PFOA dosage (0.2 mg L-1), the rate constant increased considerably from 0.079 ± 0.001 to 0.259 ± 0.019 min-1 when sulfate increased from 0.1% to 10%, likely due to the production of SO4•-. However, at higher initial PFOA dosage (20 mg L-1), the rate constant decreased slightly from 0.019 ± 0.001 to 0.015 ± 0.000 min-1, possibly due to the occupation of active anode sites by excess amount of sulfate. SO4•- and •OH played important roles in decomposition and defluorination of PFOA, respectively. PFOA oxidation was initiated by one electron transfer to the anode or SO4•-, undergoing Kolbe decarboxylation where yielded perfluoroalkyl radical followed three reaction pathways with •OH, O2 and/or H2O. PFAS electrooxidation depended on the chemical structures where the decomposition rate constants (min-1) were in the order of 6:2 FTCA (0.031) > PFOA (0.019) > GenX (0.013) > PFBA (0.008). PFBA with a shorter chain length and GenX with -CF3 branching had slower decomposition than PFOA. While presence of C-H bonds makes 6:2 FTCA susceptible to the attack of •OH accelerating its decomposition kinetic. Conducting experiments in mixed solution of all studied PFAS and in natural water showed that the co-presence of PFAS and other water constituents (organic and inorganic matters) had adverse effects on PFAS decomposition efficiency.

Electrochemical and photo-assisted electrochemical treatment of the pesticide imidacloprid in aqueous solution by the Fenton process: effect of operational parameters

Electro-catalytic degradation pathway and mechanism of acetamiprid using an Er doped Ti/SnO2–Sb electrode

Electrochemical Oxidation Approach towards the Treatment of Acetamiprid Pesticide from Polluted Water

Efficient removal of insecticide "imidacloprid" from water by electrochemical advanced oxidation processes

On the performance of electrocatalytic anodes for photoelectro-Fenton treatment of synthetic solutions and real water spiked with the herbicide chloramben

Applications of advanced oxidation processes (electro-Fenton and sono-electro-Fenton) for degradation of diazinon insecticide from aqueous solutions: optimization and modeling using RSM-CCD, influencing factors, evaluation of toxicity, and degradation pathway

Degradation of diazinon from aqueous solutions by electro-Fenton process: effect of operating parameters, intermediate identification, degradation pathway, and optimization using response surface methodology (RSM)

Highly Efficient Photocatalytic Degradation of Imidacloprid Based on Iron Metal-Organic Frameworks of Mesoporous NH2-MIL-88b/Graphite Carbon Nitride Nanocomposites by Visible Light Driven in Aqueous Media

Oxidation of imidacloprid insecticide through PMS activation using CuFe2O4 nanoparticles: Role of process parameters and surface modifications

Comparative experimental study on the COD removal in aqueous solution of pesticides by the electrocoagulation process using monopolar iron electrodes

Study on the degradation of methamidophos pesticide wastewater by acidification-Fenton oxidation process

Superior photo-Fenton degradation of acetamiprid by α- Fe2O3-pillared bentonite/L-cysteine complex: Synergy of L-cysteine and visible light

Pesticide wastewater treatment using the combination of the microbial electrolysis desalination and chemical-production cell and Fenton process

Transformation and removal of imidacloprid mediated by silver ferrite nanoparticle facilitated peroxymonosulfate activation in water: Reaction rates, products, and pathways

Degradation of the insecticide propoxur by electrochemical advanced oxidation processes using a boron-doped diamond/air-diffusion cell

Treatment of single and mixed pesticide formulations by solar photoelectro-Fenton using a flow plant

Electrochemical degradation of PFOA and its common alternatives: Assessment of key parameters, roles of active species, and transformation pathway

Improved degradation of diuron herbicide and pesticide wastewater treatment in a three-dimensional electrochemical reactor equipped with PbO2 anodes and granular activated carbon particle electrodes

Photodegradation of imidacloprid insecticide using polyethersulfone membranes modified with iron doped cerium oxide

Electro-Fenton degradation of pefloxacin using MOFs derived Cu, N co-doped carbon as a nanocomposite catalyst

Photocatalytic treatment of water-soluble pesticides by photo-Fenton and TiO2 using solar energy