Abstract:This study investigates the decolorization of two widely used textile dyes (Acid Black 172 (AB172) and Disperse Blue 56 (DB56) by using a combined sono-photo-electro-Fenton (SPEF) process. The effects of dye structure and processing factors on dye degradation from contaminated water and COD removal efficiency were determined by adopting response surface methodology. The results confirmed that current density, irradiation time, pH, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), and AB172 concentration had the most impacts on COD removal, respectively, whereas DB56 removal efficiency was highly dependent on the initial dye concentration and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), compared to other processing factors. The dye degradation efficiency of 95.5% and COD removal efficiency of 91.6% for DB56 were obtained at optimum conditions of pH = 3, current density = 2 mA.cm−2, dye concentration = 200 ppm, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.78 and irradiation time of 30 min. In the case of AB172, the same optimum conditions were found unlike reaction time of 50 min and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.33, which resulted in the optimal dye degradation efficiency and COD removal of 97.4% 94.5%, respectively. These results verified that the type of dye and its structure can be a key factor in the Fenton-based degradation process. The comparison of the performance of different Fenton-based processes confirmed that the removal efficiency of electro-Fenton, sono-electro-Fenton, photo-electro-Fenton, and SPEF was 82–88%, 89.5–91%, 91.5–92.3% and 95.5–97.4%, respectively. The Fenton-based processes are highly effective methods that can be applied for water and wastewater treatment.Graphic

Degradation of diazinon from aqueous solutions by electro-Fenton process: effect of operating parameters, intermediate identification, degradation pathway, and optimization using response surface methodology (RSM)

Applications of advanced oxidation processes (electro-Fenton and sono-electro-Fenton) for degradation of diazinon insecticide from aqueous solutions: optimization and modeling using RSM-CCD, influencing factors, evaluation of toxicity, and degradation pathway

Degradation Process and Kinetics Study of Actual Urotropine Wastewater by Fenton Method

Electrochemical degradation of diazinon from aqueous media using graphite anode: Effect of parameters, mineralisation, reaction kinetic, degradation pathway and optimisation using central composite design

Kinetics study on degradation of herbicide ZJ0777 by Fenton reagent

Visible light-driven ZnO/Fe3O4 magnetic nanoparticles for detoxification of diazinon: the photocatalytic optimization process with RSM-BBD model

Degradation of Phenol in Aqueous Solutions Using Electro-Fenton Process

Mechanistic insight into the degradation of sulfadiazine by electro-Fenton system: Role of different reactive species

Loading of zinc oxide nanoparticles from green synthesis on the low cost and eco-friendly activated carbon and its application for diazinon removal: isotherm, kinetics and retrieval study

Investigation and optimization of the performance of sono-photo-electro-Fenton process for removal of Acid Black 172 and Disperse Blue 56 from polluted water: comparison of the degradation activity with electro-Fenton-based processes

Response surface modeling for the treatment of methylene blue from aqueous media using electro-Fenton process before determination by UV-VIS spectrometer: Kinetic and degradation mechanism

Electrochemical and photo-assisted electrochemical treatment of the pesticide imidacloprid in aqueous solution by the Fenton process: effect of operational parameters

Optimization the Effects of Physicochemical Parameters on the Degradation of Cephalexin in Sono-Fenton Reactor by Using Box-Behnken Response Surface Methodology

Degradation of Oxytetracycline by Electrochemical, Fenton and Electro-fenton Processes Using SS316 and SS316/β-PbO2 Anodes: Process Optimization Using Rsm-ccd, Bioassay Test and Degradation Pathway

Optimization of Spent Radioactive Resins Degradation by Fenton‐like Oxidation Using Response Surface Methodology

Degradation of Diclofenac in Water Using the O3/UV/S2O8 Advanced Oxidation Process

Electrochemical Oxidation Approach towards the Treatment of Acetamiprid Pesticide from Polluted Water

Optimisation of CuO/AC, Fe 2 O 3 /AC synergistic multi-electrode DBD reactor for degradation of ATZ in water

Decolorization and Degradation of Methyl Orange Azo Dye in Aqueous Solution by the Electro Fenton Process: Application of Optimization

Hydroxyzine removal from the polluted aqueous solution using the hybrid treatment process of electrocoagulation and adsorption; optimization, and modeling

Efficient Degradation of Carbendazim by Ferrate(VI) Oxidation under Near-Neutral Conditions