A reconfigurable liquid metal antenna driven by electrochemically controlled capillarity

M. Wang,C. Trlica,M. R. Khan,M. D. Dickey,J. J. Adams
DOI: https://doi.org/10.1063/1.4919605
IF: 2.877
2015-05-21
Journal of Applied Physics
Abstract:We describe a new electrochemical method for reversible, pump-free control of liquid eutectic gallium and indium (EGaIn) in a capillary. Electrochemical deposition (or removal) of a surface oxide on the EGaIn significantly lowers (or increases) its interfacial tension as a means to induce the liquid metal in (or out) of the capillary. A fabricated prototype demonstrates this method in a reconfigurable antenna application in which EGaIn forms the radiating element. By inducing a change in the physical length of the EGaIn, the operating frequency of the antenna tunes over a large bandwidth. This purely electrochemical mechanism uses low, DC voltages to tune the antenna continuously and reversibly between 0.66 GHz and 3.4 GHz resulting in a 5:1 tuning range. Gain and radiation pattern measurements agree with electromagnetic simulations of the device, and its measured radiation efficiency varies from 41% to 70% over its tuning range.
physics, applied
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop a new type of reconfigurable radio - frequency (RF) antenna to achieve broader and more flexible frequency tuning. Traditionally, reconfigurable components modify the current distribution on a device by using switching circuit elements (such as diodes and varactors) in a few positions, thereby changing its RF characteristics. However, this local loading method can only achieve a limited number and range of states. To solve this problem, the authors propose a liquid - metal antenna based on electrochemically controlled capillarity (ECC). Specifically, they use the method of electrochemically depositing or removing the oxide on the surface of the liquid metal to significantly reduce or increase the interfacial tension of the liquid metal, so that it can enter and exit the capillary. This method does not require a mechanical pump and can achieve continuous and reversible control of the liquid metal by applying only a low voltage, thereby adjusting the operating frequency of the antenna. ### Main contributions 1. **No mechanical pump required**: The flow of liquid metal is controlled by an electrochemical method, avoiding complex and restrictive mechanical systems. 2. **Wide - range frequency tuning**: By changing the physical length of the liquid metal, a wide - range frequency tuning from 0.66 GHz to 3.4 GHz is achieved, and the tuning ratio reaches 5.2:1. 3. **High efficiency and repeatability**: The experimental results show that the radiation efficiency of the antenna remains at a relatively high level (41% - 70%) at different frequencies, and the tuning process has good repeatability. ### Experimental design and results - **Experimental design**: A glass capillary is filled with liquid EGaIn (gallium - indium alloy), and its flow is controlled by an electrochemical reaction in an electrolyte solution. By applying different DC voltages, the injection and extraction of EGaIn can be achieved. - **Measurement results**: The reflection coefficient is measured by a vector network analyzer (VNA) to verify the resonant frequency of the antenna at different lengths. The experimental results show that the antenna can be continuously tuned over a wide frequency band, and at the same length, the frequency responses of the injection and extraction processes are consistent, proving the reversibility and consistency of the tuning. ### Conclusion This research presents a reconfigurable monopole antenna based on electrochemically controlled capillarity. A wide - range frequency tuning is achieved by changing the length of the liquid metal. Compared with traditional antennas based on switches or varactors, this method has a larger tuning range and higher flexibility. Although there are some problems such as losses and slow switching speed, this method provides new possibilities for adaptive and multi - functional radios in future wireless sensing and communication systems. If you need more detailed information or have other questions, please feel free to let me know!