A Polarization-Reconfigurable Wideband High-Gain Antenna Using Liquid Metal Tuning

Chang Xu,Zhengpeng Wang,Yi Wang,Peng Wang,Steven Gao
DOI: https://doi.org/10.1109/tap.2020.2996773
IF: 5.7
2020-08-01
IEEE Transactions on Antennas and Propagation
Abstract:This article presents a polarization-reconfigurable wideband high-gain antenna based on liquid metal tuning. The antenna consists of a center-feed circular patch antenna with a C-shaped slot as the driven element. To broaden the bandwidth and improve the realized gain, a parasitic circular disc and 13 circular directors are employed. The direction of polarization can be tuned by changing the location of the liquid metal alloy contained in the tube. The relationship between the dimensions and the maximally achievable gain has been analyzed. The antenna has exhibited a −10 dB impedance bandwidth from 4.3 to 5.3 GHz (a fractional bandwidth of 21.2%). A 14.4 dBi gain is achieved at 5.3 GHz. The simulation and measurement results show good agreement with each other.
telecommunications,engineering, electrical & electronic
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to design a broadband, high - gain, and polarization - reconfigurable antenna tuned by liquid metal. Specifically, the researchers aim to achieve this goal through the following aspects: 1. **Broadband operation**: Traditional Yagi antennas usually have a narrow bandwidth. However, the design proposed in this paper achieves broadband impedance matching from 4.3 GHz to 5.3 GHz (a fractional bandwidth of 21.2%) by introducing a center - fed circular patch antenna and parasitic disks. 2. **High gain**: By optimizing the antenna structure, especially at a frequency of 5.3 GHz, this antenna achieves a gain of 14.4 dBi, which significantly improves the performance of the antenna. 3. **Polarization - reconfigurable**: By changing the position of the liquid metal in the tube, the polarization direction of the antenna can be easily adjusted. This design allows the antenna to work in multiple polarization states such as 0°, 30°, 90°, and 180°, thus adapting to different application scenarios. ### Key technical points - **Liquid - metal tuning**: Use a liquid - metal alloy (such as EGaIn or Galinstan) as a tuning element and adjust the polarization direction of the antenna by changing its position in the microfluidic channel. - **Multi - mode resonance**: Two resonance modes are excited by the center - fed circular patch antenna and the parasitic patch, thereby expanding the bandwidth of the antenna. - **Optimized antenna structure**: Use 13 circular metal disks as directors and further improve the gain and bandwidth of the antenna by optimizing the size and spacing of these directors. ### Experimental verification - **Simulation and measurement results**: The antenna performance is simulated by the full - wave simulation software CST and measured by a vector network analyzer. The results show that the simulation and measurement results are basically consistent, verifying the effectiveness of the design. - **Radiation characteristics**: The radiation characteristics of the antenna are measured in an anechoic chamber. The results show that at different frequencies, both the co - polarization and cross - polarization modes of the antenna exhibit good performance. In conclusion, through innovative antenna design and liquid - metal tuning technology, this paper successfully realizes a broadband, high - gain, and polarization - reconfigurable Yagi antenna, providing new solutions for wireless communication and radar systems.