Abstract:Copper (Cu)'s electrical conductivity makes it attractive for industrial usage. Due to its inferior mechanical characteristics, thermal expansion, and wear resistance, its applications are limited. This manuscript solves these issues while retaining its major feature, excellent electrical conductivity. In this regard, different quantities of graphene (Gr) and fly ash (FA) nanoparticles were combined with Cu in a planetary ball mill at 440 rpm for 20 h using powder metallurgy (PM). The microstructure of the generated powders was characterized using X-ray diffraction technique and transmission electron microscopy. The powders underwent compression and were then subjected to firing at three distinct temperature levels, reaching a maximum of 850 °C. In addition, an analysis was conducted on the microstructure, mechanical properties, wear resistance, thermal expansion behaviour, and electrical conductivity of the sintered samples. Based on the findings, the inclusion of a hybrid of Gr and FA ceramics effectively led to a reduction in particle sizes. The bulk density slightly decreases with the addition of hybrid ceramic while increasing with the rise in sintering temperature. The hybrid composited Cu/0.8 vol.% Gr/8 vol.% FA recorded an increase in the microhardness, ultimate stress, and Young's modulus of 25, 20, and 50%, respectively, relative to the Cu matrix. Furthermore, the wear rate and coefficient of thermal expansion for the same sample decreased by 67 and 30%, respectively. Finally, increasing the sintering temperature showed a clear improvement in the mechanical, electrical, and corrosion properties. Based on the results obtained, it can be concluded that the prepared hybrid nanocomposites can be used in power generation, power transmission, electronic circuits, and other applications.

Microstructure, electrical conductivity and hardness of multilayer graphene/Copper nanocomposites synthesized by flake powder metallurgy

Mechanical and electrical properties of graphene nanosheet reinforced copper matrix composites materials produced by powder metallurgy method

Microstructure and properties of bulk copper matrix composites strengthened with various kinds of graphene nanoplatelets

Microstructure and Properties of a Graphene Reinforced Cu–Cr–Mg Composite

Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites

Microstructure and properties of copper matrix composites reinforced with Cu-doped graphene

The effect of type and ratio of reinforcement on the synthesis and characterization Cu-based nanocomposites by flake powder metallurgy

Microstructure and mechanical properties of graphene-reinforced copper matrix composites prepared by in-situ CVD, ball-milling, and spark plasma sintering

Study of Processing and Microstructure of Copper Composite Reinforced with Graphene Nanosheet by Powder Metallurgy Technique

Fabrication and characterization of copper and copper alloys reinforced with graphene

Production of few-layered graphene reinforced copper by powder metallurgy

Hardness and electrical conductivity of uncoated and silver coated carbon nanotubes reinforced copper nanocomposites

Enhanced mechanical, tribological and corrosion properties of graphite and carbon nanotube-reinforced copper-based hybrid composites

Enhanced physical and mechanical properties of Cu-based nanocomposites with bundled multi-layered carbon nanotubes incorporation: fabrication and comparative analysis via conventional sintering and SPS techniques

Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites

Comprehensive studies for evaluating promising properties of Cu/graphene/fly ash nanocomposites

Effect of sintering temperature on grain growth and mechanical properties of copper/graphene nanosheet composite

Powder-metallurgical construction of graphene-like nanosheet network reinforced Cu composites towards balanced high-performance

High strength and conductivity copper matrix composites reinforced by in-situ graphene through severe plastic deformation processes

Effect of graphene on microstructure and properties of Gr/CuCr10 composites

Surface modification on copper particles toward graphene reinforced copper matrix composites for electrical engineering application