Abstract:Two-dimensional vanadium carbide (V2C) and titanium carbide (Ti3C2) MXenes were first synthesized by exfoliating V2AlC or Ti3AlC2 and then introduced jointly into magnesium hydride (MgH2) to tailor the hydrogen desorption/absorption performances of MgH2. The as-prepared MgH2–V2C–Ti3C2 composites show much better hydrogen storage performances than pure MgH2. MgH2 with addition of 10 wt % of 2V2C/Ti3C2 initiates hydrogen desorption at around 180 °C; 5.1 wt % of hydrogen was desorbed within 60 min at 225 °C, while 5.8 wt % was desorbed within 2 min at 300 °C. Under 6 MPa H2, the dehydrided MgH2–2V2C/Ti3C2 can start to recover hydrogen at room temperature, and 5.1 wt % of H2 is obtained within 20 s at a constant temperature of 40 °C. The reversible capacity (6.3 wt %) does not decline for up to 10 cycles, which shows excellent cycling stability. The addition of 2V2C/Ti3C2 can remarkably lower the activation energy for the hydrogen desorption reaction of MgH2 by 37% and slightly reduce the hydrogen desorption reaction enthalpy by 2 kJ mol–1 H2. It was demonstrated that the combination of V2C and Ti3C2 promotes the hydrogen-releasing process of MgH2 compared with addition of only V2C or Ti3C2, while Ti3C2 impacts MgH2 more significantly than V2C in the hydrogen absorption process of MgH2 at ambient temperatures. A possible mechanism in the hydrogen release and uptake of the MgH2–V2C–Ti3C2 system was proposed as follows: hydrogen atoms or molecules may preferentially transfer through the MgH2/V2C/Ti3C2 triple-grain boundaries during the desorption process and through the Mg/Ti3C2 interfaces during the absorption process. Microstructure studies indicated that V2C and Ti3C2 mainly act as efficient catalysts for MgH2. This work provides an insight into the hydrogen storage behaviors and mechanisms of MgH2 boosted by a combination of two MXenes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c23150?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c23150</a>.XRD patterns of as-milled samples (Figure S1); XRD patterns of MgH2 + 45 wt % (2V2C/Ti3C2) in different states (Figure S2); isothermal hydrogen desorption curves; JMA plots; and Arrhenius's plots of as-milled samples (Figures S3–S6) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c23150/suppl_file/am0c23150_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

MgH2-based hydrogen storage tank: Kinetics, reversibility, and MWCNTs content

Novel 1D Carbon Nanotubes Uniformly Wrapped Nanoscale MgH2 for Efficient Hydrogen Storage Cycling Performances with Extreme High Gravimetric and Volumetric Capacities

Fluorinated Carbon Tubes As Carriers for MgH2 with Enhanced Hydrogen Storage Performances

Synergistic Effect of LiBH4and LiAlH4Additives on Improved Hydrogen Storage Properties of Unexpected High Capacity Magnesium Hydride

Enhanced Hydrogen Storage Properties of MgH2 by the Synergetic Catalysis of Zr0.4Ti0.6Co Nanosheets and Carbon Nanotubes

Hydrogen Storage Properties of Nano-Cob/cnts Catalyzed MgH2

The Dehydrogenation Mechanism and Cycling Property of MgH 2 Modified by CoB/CNTs Addition

Achieving superior hydrogen storage properties of MgH<sub>2</sub> by the effect of TiFe and carbon nanotubes

Extreme high reversible capacity with over 8.0 wt% and excellent hydrogen storage properties of MgH<sub>2</sub> combined with LiBH<sub>4</sub> and Li<sub>3</sub>AlH<sub>6</sub>

Remarkably Improved Hydrogen Storage Properties of Carbon Layers Covered Nanocrystalline Mg with Certain Air Stability

Experimental and Theoretical Study on High Hydrogen Storage Performance of Mg(NH2)2-2LiH Composite System Driven by Nano CeO2 Oxygen Vacancies

Superior De/hydrogenation Performances of MgH2 Catalyzed by 3D Flower-Like TiO2@C Nanostructures

Hybrid of Bulk NbC and Layered Nb4C3 MXene for Tailoring Hydrogen Storage Kinetics and Reversibility of Li-Mg-B-H Composite: an Experimental and Theoretical Study

Nonisothermal and Isothermal Hydrogen Storage Behaviors of MgH2‐Based Composites Catalyzed by Carbon Isomeric Catalysts: Lightweight and Efficient Catalysis to Achieve High Capacity of Hydrogen Storage

Combinations of V2C and Ti3C2 MXenes for Boosting the Hydrogen Storage Performances of MgH2

Enhanced Hydrogen Storage Properties of MgH2 with Numerous Hydrogen Diffusion Channels Provided by Na2Ti3O7 Nanotubes

Enhancing Hydrogen Storage Kinetics and Cycling Properties of NaMgH3 by 2D Transition Metal Carbide MXene Ti3C2

Enhancing hydrogen storage capacity: MWCNT-infused Mg–Ti alloy synthesized via mechanical alloying

Mn nanoparticles enhanced dehydrogenation and hydrogenation kinetics of MgH2 for hydrogen storage

Ni-Doped Carbon Nanotube-Mg(BH 4 ) 2 Composites for Hydrogen Storage

Combinations of V 2 C and Ti 3 C 2 MXenes for Boosting the Hydrogen Storage Performances of MgH 2