Abstract:This paper is aiming at development of an analytical approach for computation of the geometrical parameters of cutting edges of an involute hob. It is well recognized that the involute hob geometry strongly affects the cutting tool performance, as well as the efficiency of gear hobbing operation. It is proven experimentally and by industrial practice that the optimal value of every geometrical parameter of the tool cutting edge exists and, thus, it can be found out. A method for computation of the cutting edge geometry is necessary for optimization of parameters of a gear hobbing operation. In this paper, an analytical method for the computation of the cutting edge geometry of a gear hob is reported. The method is based on wide application of elements of vector calculus and matrices. The analysis is performed in the tool-in-use reference system. An equation of the penetration curve is derived. The machining zone is partitioned onto several different sectors. The roughing sector and the generating sector are distinguished. Generating of the work-gear tooth profile occurs within the generating sector that is bounded by the penetration curve. The derived equations, as well as the worked-out computer codes are applicable for computation of the cutting edge geometry at any point of the cutting edge of the hob, and at a any instant of time. The equations and the computer codes enable one estimating the impact of (a) the hob diameter, (b) the hob number of starts, (c) the work-gear number of teeth, (d) the hob feed rate, and (e) the hob rotation onto the actual values of the geometrical parameters of the hob cutting edges. Numerical results of the investigation are computed using commercial software MATHCAD-SCIENTIFIC. The results of the computation of the cutting edge geometry of the involute hob enable the user (a) to avoid not-feasible values of any and all geometrical parameters of the cutting edge of the hob teeth, (b) to develop parameters of the hob grinding and reliving operations, which guaranteed the optimal values of any and all geometrical parameters of the hob cutting edges. Ultimately, the application of the hobs with optimal geometry of the cutting edges will result in an increase in the cutting tool performance and in the efficiency of the gear hobbing operation. The latter is of critical importance for high volute production of involute gears for the needs of the automotive industry. The reported research results are ready to be put into practice.

The Compound Hob for Processing Gearbox Pinions Used in Hoist for Well Repairs

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

Advanced Computer Aided Design Simulation of Gear Hobbing by Means of Three-Dimensional Kinematics Modeling

Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models

Hyperboloid-Type Hobs: Design, Manufacture, and Application

Design of Gear Hobbing Processes Using Simulations and Empirical Data

Profile Optimisation of a Solid Modular Hob in the Machining of Gears Made of Classic and Unusual, Innovative Materials

CAD-based simulation of the hobbing process for the manufacturing of spur and helical gears

Hob for worm gear manufacturing with circular profile

Research on Non-Circular Gear Hobbing Simulation Based on Piecewise Cubic Spline Fitting

Process Concepts for Gear Finish Hobbing

System of Hobs Unification for Gear-Wheel Cutting of Worm-Type Gears

Investigation of the Tooth Geometry of a Hob for Machining of Involute Gears (in the Tool-in-Use Reference System)

Hobbing Manufacturing of New Type of Involute-Helix Gears for Wind Turbine Gearbox

Research on the Hobbing Processing Method of Marine Beveloid Gear

Gear Hobs—Cutting Tools and Manufacturing Technologies for Spur Gears: The State of the Art

Prediction and optimization of hobbing gear geometric deviations

Design and Analysis of Split Fixture for Gear Hobbing Machine

Simulation and experimental study of tool wear in high-speed dry gear hobbing

PROFILING OF THE HOB TOOL FOR WORM SHAFTS DEFORMATION

On the Design and Simulation of Hybrid Metal-Composite Gears