Abstract:The use of functional polymeric composites with superior thermal properties, capable of replacing conventional polymers, has increased in recent years, particularly in the electrical‐electronics sector where thermal management is crucial. Carbon fiber polymer–matrix structural composites have relatively high in‐plane thermal conductivity but low through‐plane conductivity. In order to further enhance the through‐plane and in‐plane conductivity of carbon fiber (CF)‐reinforced polybutylene terephthalate (PBT) composite, a hybrid loading approach was employed, incorporating synthetic graphite (SG), boron nitride (HBN), aluminum nitride (AlN), and graphene (G) in composite formulations. It was obtained that the in‐plane conductivity values of PBT‐20CF‐20SG‐3G and the through‐plane conductivity of PBT‐20CF‐20SG‐3AlN are 69% and 25% higher than those of PBT‐40CF, respectively. However, the mechanical properties of hybrid composites exhibit lower values compared to those of CF‐reinforced PBT composites. The tensile strength value of PBT‐40CF is about 33% and 57% higher than that of PBT‐20CF‐20SG‐3G and PBT‐20CF‐20SG‐3AlN. Moreover, the flexural strength of PBT‐40CF is about 48% and 38% higher than that of PBT‐20CF‐20SG‐3G and PBT‐20CF‐20SG‐3AlN, respectively. The density value of PBT‐40CF is lower than that of the composites of PBT‐20CF‐20SG. From thermogravimetric analysis (TGA) analysis it was observed that the thermal stability of PBT‐40CF is comparable to that of the composites PBT‐20CF‐20SG. From the conducted study, it can be proposed that the hybrid combination of SG, HBN, AlN, and G can be utilized to achieve higher thermal conductivity values, as opposed to relying solely on CF in the composites. This article is protected by copyright. All rights reserved.

Improved thermal conductivity of polycarbonate composites filled with hybrid exfoliated graphite/multi-walled carbon nanotube fillers

Synergistic effect of selectively distributed AlN/MWCNT hybrid fillers on the morphological, mechanical and thermal properties of polycarbonate/maleated poly[styrene-b-(ethylene-co-butylene)-b-styrene] triblock copolymer (SEBS-g-MA) composites

Improved thermal properties by controlling selective distribution of AlN and MWCNT in immiscible polycarbonate (PC)/Polyamide 66 (PA66) composites

Thermal Conductivity of Poly Vinylidene Fluoride Composites Filled with Expanded Graphite and Carbon Nanotubes

Synergistic effect of carbon fiber and alumina in improving the thermal conductivity of polydimethylsiloxane composite

Microwave-Exfoliated Graphite Oxide/Polycarbonate Composites

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

A double mixing process to greatly enhance thermal conductivity of graphene filled polyamide 6 composites

Thermal conductive segregated multi-scale network constructed by ball-milling and in-situ polymerization in PEEK/MWCNT/graphite composite

Conductive polycarbonate composites prepared by a ternary polymer blend approach involving sea‐island‐type interfacial carbon black networks

Thermally conductive polystyrene/epoxy nanocomposites fabricated by selective localization of hybrid fillers

Improving Dielectric Properties and Thermal Conductivity of Polymer Composites Withcacu3ti4o12and Β-Sichybrid Fillers

Significantly enhanced thermal conductivity of polymer composites via establishing double-percolated expanded graphite/multi-layer graphene hybrid filler network

Preparation and characterization of composites based on poly(vinylidene fluoride-co-chlorotrifluoroethylene) and carbon nanofillers: a comparative study of exfoliated graphite nanoplates and multi-walled carbon nanotubes

Microstructure and Properties of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Composites Based on Carbon Nanotubes/graphene Nanoplatelets Hybrid Filler Systems

Enhanced thermal conductivity for poly(vinylidene fluoride) composites with nano-carbon fillers

Highly thermally conductive carbon nanotubes pillared exfoliated graphite/polyimide composites

The Effect of Hybrid Thermal Fillers on Thermal Conductivity of Carbon Fiber Reinforced Polybutylene Terephthalate Composites

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

High Thermal Conductive Poly(vinylidene Fluoride)-Based Composites with Well-Dispersed Carbon Nanotubes/graphene Three-Dimensional Network Structure Via Reduced Interfacial Thermal Resistance

Thermal conductive nylon 6 composites using hybrid fillers to construct a three‐dimensional thermal conductive network