Abstract:In the context of carbon reduction and emission reduction, the new process of electric arc furnace (EAF) steelmaking based on direct hydrogen reduction is an important potential method for the green and sustainable development of the steel industry. Within an electric furnace for the hydrogen-based direct reduction of iron, after hydrogen-based directly reduced iron (HDRI) is produced through a shaft furnace, HDRI is melted or smelted in an EAF to form final products such as high-purity iron or high-end special steel. As smelting proceeds in the electric furnace, it is easy for pieces of HDRI to bond to each other and become larger pieces; they may even form an "iceberg", and this phenomenon may then worsen the smelting working conditions. Therefore, the melting of HDRI is the key to affecting the smelting cycle and energy consumption of EAFs. In this study, based on the basic characteristics of HDRI, we established an HDRI melting model using COMSOL Multiphysics 6.0 and studied the HDRI melting process, utilizing pellets with a radius of 8 mm. The results of our simulation show that the HDRI melting process can be divided into three different stages: generating a solidified steel layer, melting the solidified steel layer, and melting HDRI bodies. Moreover, multiple HDRI processes are prone to bonding in the melting process. Increasing the spacing between pieces of HDRI and increasing the preheating temperature used on the HDRI can effectively reduce the aforementioned bonding phenomenon. When the melting pool temperature is 1873 K, increasing the spacing of HDRI to 10 mm and increasing the initial HDRI temperature to 973 K was shown to effectively reduce or eliminate the bonding phenomenon among pieces of HDRI. In addition, with the increase in the melting pool temperature, the time required for melting within the three stages of the HDRI melting process shortened, and the melting speed was accelerated. With the increase in the temperature used to preheat the HDRI, the duration of the solidified steel layer's existence was also shortened, but this had no significant impact on the time required for the complete melting of HDRI. This study provides a theoretical basis for the optimization of the HDRI process within EAFs.

Mass Balance Simulation for Steam Reformer in Direct Reduction of Iron Ore by Hyl III Process.

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Exergy analysis and CO2 emission evaluation for steam methane reforming

Numerical analysis of multiphase flow in chemical looping reforming process for hydrogen production and CO2 capture

Modeling the First Hydrogen Direct Reduction Pilot Reactor for Ironmaking in the USA Using Finite Element Analysis and Its Validation Using Pilot Plant Trial Data

Modeling Isothermal Reduction of Iron Ore Pellet Using Finite Element Analysis Method: Experiments & Validation

Mathematical Modeling for the Process of Smelting Reduction Ironmaking Integrated with Hydrogen-Rich Coal Gasification

Multiscale modeling of non-catalytic gas-solid reactions applied to the hydrogen direct reduction of iron ore in moving-bed reactor

Detailed Modeling of the Direct Reduction of Iron Ore in a Shaft Furnace

Process modelling for the production of hydrogen-based direct reduced iron in shaft furnaces using different ore grades

Optimization of the Iron Ore Direct Reduction Process through Multiscale Process Modeling

Multiscale modeling of counter-current moving bed reactor for direct reduction of iron oxide: Unveiling influence of solid shape and pressure

Direct reduction of iron-ore with hydrogen in fluidized beds: A coarse-grained CFD-DEM-IBM study

Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

Advanced physical model of hydrothermic reduction of iron ore pellets by dissociated 2H+ ionic gas in the shaft furnace

Simulation of Natural Gas Steam Reforming Furnace

Numerical Analysis of Steam Reformer of Steam Methane Reforming Hydrogen Production System Connected with High Temperature Gas Cooled Reactor

Numerical Simulation of the Hydrogen-Based Directly Reduced Iron Melting Process

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Integrating a Top-Gas Recycling and CO2 Electrolysis Process for H2-Rich Gas Injection and Reduce CO2 Emissions from an Ironmaking Blast Furnace