Abstract:Facile surface micro/nanostructuring techniques for additively-manufactured (AM) aluminum alloy (AlSi10Mg) have recently been developed. The structuring techniques are not only highly scalable, but they also enable the tailoring of structure length scale and morphology to enhance pool boiling heat transfer coefficient. Our past study revealed that the structure cavity size of 5 μm is favorable for bubble nucleation during pool boiling of dielectric fluid, HFE-7100, resulting in significant enhancements in the heat transfer coefficients ( h ). However, owing to the differences in thermophysical properties between different coolant fluids, including saturation temperature, latent heat of vaporization and surface tension, the required structure size range for bubble nucleation and capillary wicking force for liquid re-supply are expected to differ significantly. To explore the effect of structure length scale on the pool boiling performance of coolants with different thermophysical properties, this work develops a new surface structuring technique consisting of a dual-stage metallurgic heat treatment process and single-stage crystallographic etching process to tune the structure length scale across nearly two orders of magnitude, viz. , from 0.3 to 15 μm. Using coolant media of vastly different thermophysical properties, i.e., dielectric fluid HFE-7100 and deionized water, we show that while microcavities with sizes ranging from 3 to 8 μm are favorable bubble nucleation sites for boiling of HFE-7100, which result in the enhancement of the maximum heat transfer coefficient ( h max ) by 83.4 to 103.8 % as compared to a conventional plain Al6061 surface, larger microcavity sizes of 10 to 15 μm are required to effectively promote bubble nucleation of water. This large microcavity size range of 10 to 15 μm, produced through rational nanoparticle agglomeration of the rich Si-phase in AM AlSi10Mg in elevated temperature, followed by an indirect removal process using a chemical process, is found to significantly increase h max of water by up to 259.9 % as compared to conventional nanostructures formed on Al6061. In addition, the new AM structured surfaces also exhibit up to 26.6 % enhancement in critical heat flux (CHF) as compared to highly-wicking conventional nanostructured Al6061. In summary, by utilizing scalable fabrication techniques to tailor the structure length scale on AM AlSi10Mg, this work not only reveals the favorable microcavity sizes for bubble nucleation of different coolant fluids to enhance boiling, but it also provides useful micro/nanostructure design guidelines that can be adopted to enhance boiling of other coolants and phase change applications.

Surface with recoverable mini structures made of shape-memory alloys for adaptive-control of boiling heat transfer

Structural design for adaptive heat transfer enhancement

Boiling and quenching heat transfer advancement by nanoscale surface modification

Hierarchical gradient mesh surfaces for superior boiling heat transfer

Boiling enhancement on surfaces with smart wettability transition

Study of enhanced boiling heat transfer by microstructure surfaces with hydrophilic-hydrophobic combined

Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement

The synergistic effect of micro/nanostructure length scale and fluid thermophysical properties on pool boiling heat transfer

Enhanced Phase‐Change Heat Transfer by Surface Wettability Control

Bottom-up Design of Micro-/Nano Hierarchical Surface for the Enhancement of Boiling Heat Transfer Performance: A Review

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces

Experimental investigation of a new hybrid structured surface for subcooled flow boiling heat transfer enhancement

Micro-pin-finned Surfaces with Fractal Treelike Hydrophilic Networks for Flow Boiling Enhancement

Progress in enhanced pool boiling heat transfer on macro- and micro-structured surfaces

Multiscale hybrid surface structure modifications for enhanced pool boiling heat transfer: State-of-the-art review

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling

Experimental investigations of bubble behaviors and heat transfer performance on micro/nanostructure surfaces

Three-Tier Hierarchical Structures for Extreme Pool Boiling Heat Transfer Performance

Highly efficient pool boiling heat transfer on surfaces with zoned rose-petal-inspired hierarchical structures

Adaptive Heat Flux Control in Scramjet Cooling Channel

An improved wall boiling model for numerical simulation of subcooled flow boiling on a new hybrid micro/nanostructured surface