Abstract:Cracking of pavement materials affects the service performance of pavement structures. It is widely investigated by discrete element method (DEM) because the DEM can present the cracking behavior and mechanism from the mecroscopic perspective. However, improper calibration method is time-consuming and the simulation results are not applicable for different loading conditions. To address this issue, a systematical calibration method is proposed to establish a more reasonable DEM model, and it is used to explore the cracking behavior and mechanism for pavement materials. The fiber reinforced cement treated aggregates (F-CTA) used to construct the pavement base are selected as an example to elaborate the process. First, contacts within the F-CTA were divided into five groups according to physical components. Then, laboratory tests were performed to obtain macro mechanical properties including strength and modulus. Next, the corresponding virtual tests were established and the contact model parameters were calibrated from mono-component to mixture. This calibration method was validated by the three-point bending test incorporating all contact parameters obtained from the above calibrations and the process of cracking evolution was analyzed. Results show that the simulated mechanical responses and crack distribution based on the systematical calibration are in good agreement with laboratory measurements and observations, exhibiting well reliability for calibrating contact parameters of composite material. Young's modulus of the F-CTA is sensitive to the mecro effective modulus in the virtual indirect tensile test while Young's modulus and tensile strength are vulnerable to the mecro cohesion in the virtual uniaxial compression test. The mortar-aggregate and mortar-aggregate interface is relatively weak where cracks are prone to appear. The fibers can optimize the distribution of the crack network. The cracking evolution contains three stages and the second stage has a significant influence on the cracking behavior of the F-CTA.

Dynamic splitting tensile behaviors of ceramic aggregate concrete: An experimental and mesoscopic study

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

3D mesoscopic modelling on the dynamic properties of coral aggregate concrete under direct tension

Study of dynamic behavior of concrete under splitting tensile tests based on mesomechanics

Dynamic Fracture and Dissipation Behaviors of Concrete at the Mesoscale

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Finite element modelling of mesoscale concrete material in dynamic splitting test

Direct dynamic tensile study of concrete materials based on mesoscale model

Experiment and mesoscopic modelling on the dynamic compressive behaviors of a new carbon fiber-reinforced cement-based composite

Mesoscopic study of the mechanical properties of coral aggregate concrete under complex loads

Meso-Scale Simulation of Concrete Uniaxial Behavior Based on Numerical Modeling of CT Images

3D mesoscopic analysis on the compressive behavior of coral aggregate concrete accounting for coarse aggregate volume and maximum aggregate size

Numerical study of dynamic behavior of concrete by meso-scale particle element modeling

Mechanical properties and constitutive model of coral aggregate concrete subjected to dynamic uniaxial and triaxial compression

Dynamic Behavior of a New Type of Coral Aggregate Concrete: Experimental and Numerical Investigation

High Strain Rate Splitting Tensile Tests of Concrete and Numerical Simulation by Mesoscale Particle Elements

Size Effect on Dynamic Splitting Tensile Strength of Concrete: Mesoscale Modeling

Study on Dynamic Splitting Tensile Damage Characteristics of Basalt Fiber Reinforced Concrete Based on AE and DSCM

An Experimental Study of Dynamic Compression Performance of Self-Compacting Concrete