Abstract:In this paper, A bandgap circuit that combines the capacitively-biased diode (CBD) structure and the switch capacitor (SC) amplifier structure has been proposed. Thanks to the CBD technique, the proposed circuit achieves a relatively simple but robust bandgap reference and does not require resistors or additional startup circuits, thus avoiding additional errors. By properly setting timing sequence, the circuit combines the charging of CBD and the sample-and-hold process of the SC amplifier, which solves the problem of the lack of driving capability in the CBD structure. By adjusting the ratio of sampling and holding capacitors, the SC amplifier realizes the output of the bandgap reference voltage. Furthermore, calibration of the output voltage is achieved by fine-tuning the sampling capacitor. Implemented in 0.18-μm BCD, post-layout simulation results show that the proposed BGR is capable of driving load capacitors, and meanwhile achieves temperature coefficient of 6ppm/∘C over −40∘C–125∘C; voltage accuracy (σ/μ) of 0.36%; and power supply rejection (PSR) of −42dB@10Hz, with an active area of 0.041mm2 and consumes 4.3μA current.

A CMOS bandgap reference based on switched capacitor with temperature compensation method

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A bandgap reference circuit with nominal value adjustable

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

Super Performance CMOS Band-Gap Voltage Reference

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A 1.2-V 2.18-ppm/°C curvature-compensated CMOS bandgap reference

A 0.9-V high-PSRR bandgap with self-cascode current mirror

A New Cmos Current Reference with High Order Temperature Compensation

A 6 Ppm/°c Capacitively-Biased Diode Based Novel Bandgap Circuit with Driving Capability and Calibration

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

A Near-1V 10ppm/℃ CMOS Bandgap Reference with Curvature Compensation

New Curvature-Compensated CMOS Bandgap Voltage Reference

A Bandgap Reference with Temperature Compensation and Its Output Buffer

Near-1 V 10 ppm/°C CMOS bandgap reference with curvature compensation

A Curvature Compensation Technique for Low-Voltage Bandgap Reference

A Bandgap Reference with Temperature Compensation and Improved PSRR

A Low Voltage High Precision CMOS Bandgap Reference

A 1.8ppm/°C Low Temperature Coefficient Curvature Compensated Bandgap for the Low Voltage Application

A sub-1V CMOS bandgap reference with high-order curvature compensation