Abstract:Blank holder force (BHF) is one of the important process parameters in the deep drawing process. BHF helps produce defect-free components by controlling metal flow during the deep drawing process. If BHF is low, it causes wrinkling; otherwise, it causes the sheet to rupture. Therefore, optimization of BHF is an important issue in industries. One of the effective approaches to determining optimal BHF is to study forming force, thickness distribution, and wrinkles to produce a deep-drawn cup. The main function of this approach is that it minimizes the maximum forming force and prevents process limits. Therefore, this study aims to investigate the relationship between the BHF and forming force through experimental and simulation results. In addition, the effect of BHF on the thickness distribution and wrinkling is considered. Hence, numerical and experimental methods were employed for St14 and SS304L sheets with thicknesses of 0.5, 1, and 1.5 mm to achieve the objectives. Firstly, the simulation of the process was performed to study the mechanical behavior. Then, a set of experimental tests were conducted to validate the simulations. Finally, utilizing the experimental and numerical results, the optimal BHF value was determined. It was observed that the maximum thinning and maximum forming force are related to the forming process without BHF. Moreover, when the wrinkling at the edge of the part was removed by gradually increasing BHF, the minimum values of forming force and thinning were obtained. According to the investigations carried out on three thicknesses, it was observed that by reducing the thickness from 1.5 to 0.5 mm, the maximum forming force decreases in both SS304L and St14 sheets. However, the acquired results showed that the minimum optimal BHF is obtained in both sheets at a thickness of 1.5 mm. Overall, this research provides valuable experimental and numerical guidance for implementing the deep drawing process to manufacture cylindrical parts with minimum forming force required to save energy consumption.

Optimization of Process Parameters in Deep Drawing Process Based on Orthogonal Experiment Method

Development of Drawing Die for Heat-Shield Panel of Automobile Engine Based on Finite Element

Parameters Optimization of Tailor Welded Blank Forming Process

Optimization of Processing Parameters of Aluminum Alloy Cylindrical Parts Based on Response Surface Method during Hydromechanical Deep Drawing

Application of an Improved Equivalent Drawbead Model on the Design of Deep Drawing Process

Parameters optimization of hydro-mechanical deep drawing with orthogonal design and support vector machine

Research on Parameter Optimization of Cross-Part Deep-Drawing Based on Gaussian Kernel Function with Multi-Width

Drawing process analysis of streamlined part by FEM simulation and optimization

Experimental and numerical optimization of deep drawing process parameters for square medical container design with the Taguchi method

Cae-Based Six Sigma Robust Optimization for Deep-Drawing Process of Sheet Metal

Effect of process parameters on the deep drawing formability of aluminum and advanced high-strength steel square cups

CAE-based robust optimization for deep-drawing process of sheet metal forming using grey relational analysis method

Optimization of the Stamping Direction for Drawn Components

Experimental and numerical investigation to determine the optimal blank-holder force in deep drawing process based on forming force for SS304L and St14 sheets

Optimization of Variable Blank Holder Force in Deep Drawing Based on Support Vector Regression Model and Trust Region

Numerical and Physics Simulations of Variable Blank Holder Force in Process of Deep Drawing Complex Overlay

Numerical Simulation-Driven Optimization Of. Sheet Metal Drawing Part Shape

The Study of Blank Optimization Methods for Sheet Metal Forming Parts

Process Parameters Optimization for Sheet Metal Forming During Drawing with a Multi-Objective Genetic Algorithm

Optimization of Drawbead Design in Sheet Forming Using One Step Finite Element Method Coupled with Response Surface Methodology

A New Approach of Die Shape Optimization for Sheet Metal Forming Processes