Spectroscopic Characterization of Biofield Treated Metronidazole and Tinidazole

Mahendra Kumar Trivedi

DOI: https://doi.org/10.4172/2161-0444.1000283

2015-01-01

Medicinal Chemistry

Abstract:Spectroscopic Characterization of Biofield Treated Metronidazole andTinidazoleOMICS Group is a scientific organization, 57786

chemistry, medicinal

What problem does this paper attempt to address?

Spectroscopic Characterization of Disodium Hydrogen Orthophosphate and Sodium Nitrate after Biofield Treatment

Mahendra Kumar Trivedi,Alice Branton Dahryn Trivedi

DOI: https://doi.org/10.4172/2157-7064.1000282

2015-01-01

Abstract:Spectroscopic Characterization of Disodium Hydrogen Orthophosphate and Sodium Nitrate after Biofield Treatment,<p>Mahendra Kumar Trivedi, Alice Branton, Dahryn Trivedi, Gopal Nayak, Khemraj Bairwa and Snehasis Jana</p>

English Else
Influence of the Biofield Energy Therapy on the Physicochemical and Thermal Properties of Sulfamethoxazole

Dahryn Trivedi,S. Jana,M. Trivedi,G. Nayak,A. Branton

DOI: https://doi.org/10.15436/2575-808X.18.1964

2018-11-05

Journal of Medicinal Chemistry and Toxicology

Abstract:Author(s): Trivedi, Dahryn; Trivedi, Mahendra Kumar; Branton, Alice; Nayak, Gopal; Jana, Snehasis | Abstract: Sulfamethoxazole is an antibiotic, which inhibits the bacteria by interfering in its folic acid synthesis mechanism. The objective of this study was to analyze the Trivedi Effect®-Consciousness Energy Healing Treatment on the phys-icochemical and thermal properties of sulfamethoxazole by using modern analytical techniques. The sulfamethoxaz-ole sample was classified as control and treated samples. The control sample did not receive the Biofield Treatment, while the treated sample received the Biofield Treatment remotely by a renowned Biofield Energy Healer, Dahryn Trivedi. The particle sizes of the treated sample were significantly reduced by 7.99% (d10), 3.05% (d50), 3.80% (d90), and 3.03%{D(4,3)}; whereas, the specific surface area of the particles was increased by 5.19% in the treated sample compared to the control sample. The PXRD peak intensities and crystallite sizes were altered ranging from -70.86% to 52.36% and -6.01% to 75.34%, respectively; whereas the average crystallite size was significantly increased by 27.28% in the treated sulfamethoxazole compared with the control sample. The sample residual amount and maximum thermal degradation temperature were increased by 2.13% and 4.21%, respectively, in the treated sample compared to the con-trol sample. The decomposition temperature and latent heat of decomposition were increased by 3.26% and 19.36%, respectively, in the treated sample compared to the untreated sample. The Biofield Treated sulfamethoxazole might con-vert to a novel polymorph of the drug, with reduced particle size, increased surface area, and improved thermal stability. This can be helpful in improving the solubility, bioavailability, and stability of the sulfamethoxazole and would be more efficacious for the treatment of infections in the ear, urinary tract infections, traveler’s diarrhoea, bronchitis, shigellosis, and pneumonia, etc.

Chemistry,Medicine
A comparative study of the carbon-based nanostructures for the delivery and detection of drug metronidazole

Xinyu Li,Longyan Yang,Xiyuan Sun

DOI: https://doi.org/10.1016/j.diamond.2024.111562

IF: 3.806

2024-09-08

Diamond and Related Materials

Abstract:The interactions between the metronidazole molecule and three different carbon-based nanostructures, fullerene (C 60 ), carbon nanotube (CNT), and carbon nanosheet (CNS), were examined using density functional theory (DFT) calculations. The results indicate that C 60 attaches metronidazole more stronger than CNT and CNS, and the adsorption energies of metronidazole with C 60 , CNT, and CNS are decreased after considering the solvent effects. The variation in energy gaps follows the order of CNS > C 60 > CNT, indicating that CNS has better sensing performance for metronidazole compared to fullerene and CNT. Both CNT and CNS show a reasonable recovery time at an achievable operating temperature. According to the quantum theory of atoms in molecules (QTAIM) and symmetry-adapted perturbation theory (SAPT), the dispersion component is the primary factor in stabilization, followed by electrostatic interaction. Simulated infrared (IR) and ultraviolet-visible (UV–Vis) spectra provide a basis reference for further structural characterization. This work indicates that carbon-based nanomaterials have potential applications in the delivery and detection of metronidazole.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Application of Ni,Ti-Organic Framework-Based Electrochemical Sensor for Determination of Metronidazole and Oxazepam in Real Sample

Amirabbas Mir,Mehdi Shabani-Nooshabadi,Neda Ziaie

DOI: https://doi.org/10.1007/s11244-024-01930-y

IF: 2.781

2024-03-31

Topics in Catalysis

Abstract:Treatment of bacterial, protozoal, and anaerobic illnesses such trichomonosis and vaginosis with metronidazole (MTZ) is commonplace. Therefore, a straightforward method is presented in this research for creating a metal–organic framework (MOF)-based electrochemical sensor. Direct microwave synthesis was used to create a MOF based on a combination of nickel and titanium. The glassy carbon electrode (GCE) surface was modified applying this binary mixed-MOF. To electrochemically monitor MTZ in plasma samples, the GCE was modified. Under optimum circumstances, a linear limit of 0.1–200 μM was produced using a DPV detection technique with a detection limit of 30 nM. The technique repeats within 6.2 percent from one electrode to another and from one electrode to itself (n = 5). A good relative recovery percentage (> 95%) and satisfactory precision demonstrated the electrode's plasma sample performance. It was also possible to detect both MTZ and oxazepam (OX) using the same sensor. Under optimum circumstances, the lowest detectable concentrations of MTZ and OX in the 0.1–12 μM range were 0.03 μM and 0.02 μM, respectively.

chemistry, physical, applied
Spectroscopic elucidation (FT-IR, FT-Raman and UV-visible) with NBO, NLO, ELF, LOL, drug likeness and molecular docking analysis on 1-(2-ethylsulfonylethyl)-2-methyl-5-nitro-imidazole: An antiprotozoal agent

P Manjusha,Johanan Christian Prasana,S Muthu,B Fathima Rizwana,P. Manjusha,S. Muthu,B. Fathima Rizwana

DOI: https://doi.org/10.1016/j.compbiolchem.2020.107330

IF: 3.737

2020-10-01

Computational Biology and Chemistry

Abstract:1-(2-ethylsulfonylethyl)-2-methyl-5-nitro-imidazole (1EMI) C8H13N3O4S also known as Tinidazole, selected for its antiprotozoal property is extensively used for spectroscopic elucidations and computational aspects using density functional methods. Along with spectral conclusions, further investigations on fundamental reactive properties such as electrical, optical, nonlinear combined with DFT simulations were performed. Molecular docking procedure supports the results of chosen appropriate antiprotozoal agent based on ligand-protein interactions. Experimental and simulated (B3LYP/6-311++G (d,p)) IR and Raman spectra showed concurrence. NLO analysis through first order hyperpolarizability parameter helps in finding the potential of 1EMI as a good NLO candidate. Charge delocalization and the stability of the compound were discussed using natural bond orbital (NBO) analysis. Furthermore, Electron localization function (ELF), local orbital locator (LOL), and Frontier molecular orbitals (FMO) were studied. Besides, Mulliken population analysis on atomic charges, Energy gap, chemical potential, global hardness, softness, ionization potential, electronegativity, electrophilicity index along thermodynamic parameters (enthalpy, entropy and heat capacity) have been calculated. Drug likeness parameters and molecular docking approach enabled to check pharmaceutical potential and biological activity of 1EMI. The biological activity of 1EMI through ligand and protein interactions have been confirmed theoretically for the treatment of Malaria, Invasive aspergillosis and Mycobacterium tuberculosis with respect to chosen proteins. Three different activity targets and protein interactions are quite successful revealing the bond distances, intermolecular energy, binding energy and inhibition constant. 2D interaction profile image of the two maximum interacted proteins and also Ramachandran plot used to show stereochemistry of selected protein. The activities of 1EMI were studied in accordance with literature survey and the results were presented.

biology,computer science, interdisciplinary applications
Biofield Treatment: An Alternative Approach to Combat Multidrug-Resistant Susceptibility Pattern of Raoultella ornithinolytica

Mahendra Kumar Trivedi

DOI: https://doi.org/10.4172/2327-5162.1000193

2015-01-01

Abstract:Raoultella ornithinolytica is belongs to the family of Enterobacteriaceae, a Gram-negative encapsulated aerobic bacillus associated with bacteremia and urinary tract infections. As biofield therapy is increasingly popular in biomedical heath care, so present study aimed to evaluate the impact of Mr. Trivedi’s biofield treatment on antimicrobial sensitivity, minimum inhibitory concentration (MIC), biochemical study, and biotype number of multidrug resistant strain of R. ornithinolytica. Clinical sample of R. ornithinolytica was divided into two groups i.e. control and biofield treated which were analyzed for the above parameters using MicroScan Walk-Away® system on day 10 after treatment. Antimicrobial sensitivity assay results showed a significant increase (60.71%) in sensitivity pattern of antimicrobials i.e. changed from resistant to susceptible while 10.71% of tested antimicrobials changed from intermediate to susceptible as compared to control. MIC results showed a significant decrease in MIC values of 71.88% tested antimicrobials as compared to control. Biochemical reaction study showed 15.15% alteration in different biochemical such as cetrimide, cephalothin, kanamycin, and ornithine after biofield treatment as compared to control. A significant change in biotype number (7775 4370) was also observed with organism identified as Klebsiella oxytoca after biofield treatment as compared to control (7775 5372). Overall results conclude that biofield treatment could be used as complementary and alternative treatment strategy against multidrug resistant strain of R. ornithinolytica with respect to improve the sensitivity and reduce the MIC values of antimicrobials. Hence, it is assumed that biofield treatment might be a suitable cost effective treatment strategy in near future, which could have therapeutic value in patients suffering from multidrug resistant pathogens.
Comparison among the clinical curative effects using different 5'-nitroimidazole drugs in treating anaerobic or trichomonal vaginitis

WANG Yujuan,ZHU Meifen,LUO Dongjiao,WANG Baonan,JIANG Jinqin,YAN Jie

DOI: https://doi.org/10.3969/j.issn.0253-9934.2006.06.012

2006-01-01

Abstract:Objective To observe the clinical curative effects and side-effects of metronidazole,tinidazole and ornidazole in treating anaerobic or trichomonat vaginitis, and to analyze the susceptibility of the isolated anaerobes and trichomonads to the three drugs. Methods Based on the bacteriological and parasitological laboratory examina- tion results, 290 anaerobic vaginitis patients and 62 trichomonal vaginitis patients were randomly divided into three groups treated with metronidazole, tinidazole and ornidazole, respectively. Doubling plate dilution method was ap- plied to determine the minimal inhibition concentrations(MIC) of the three drugs in inhibiting the anaerobic iso- lates, and the same dilution method was performed to detect the minimal parasiticidal concentrations (MPC) of the three drugs in killing the trichomonal isolates. Results The effective rate (54. 6%) of metronidazole in anaerobic vaginitis was remarkably lower than those of tinidazole (68. 8, P＜0. 05) and ornidazole (74. 2%, P＜0.01), but they showed no significant difference between the curative rates of tinidazole and ornidazole(P＞0. 05). The curative rates of the three drugs in trichomonal vaginitis were 90. 5%, 100% and 100%, respec- tively with no significant differences among the curative rates (P＞0.05). The total side-effect rate of metron- idazole in the treated patients was obviously higher than those of tinidazole (P＜0.01) and ornidazole (P＜0. 01), but those of tinidazole and ornidazole were similar (P＞0. 05). The MIC_(90) values of metronidazole, tinidazole and ornidazole against 266 Gram-negative anaerobic isolates were 4～8, 1～2 and 1～2μg/mL, and 32～64, 8～32 and 8～16μg/mL for 261 Gram-positive anaerobic ones, respectively. The MPC values of met- ronidazole, tinidazole and ornidazole in killing triehomonads were 25, 5 and 5μg/mL, respectively. Conclusion The outcome of comparison with metronidazole, tinidazole and ornidazole for anaerobic vaginitis shows higher cura- tive effects and lower side-effects, but metronidazole is much cheaper. The clinical anaerobic strains have much higher resistance to metronidazole. All three drugs dislay stronger activities against the Gram-negative anaerobes than the Gram-positive ones, however, the gram-negative anaerobes still show higher sensitivity to ornidazole.
Design, Characterization, and Bioanalytical Applications of Green Terbium- and Nitrogen-Doped Carbon Quantum Dots as a Fluorescent Nanoprobe for Omadacycline Analysis

Baher I Salman,Ahmed I Hassan,Hany A Batakoushy,Roshdy E Saraya,Mohamed A A Abdel-Aal,Ahmed Al-Harrasi,Adel Ehab Ibrahim,Yasser F Hassan,Baher I. Salman,Ahmed I. Hassan,Hany A. Batakoushy,Roshdy E. Saraya,Mohamed A. A. Abdel-Aal,Yasser F. Hassan

DOI: https://doi.org/10.1177/00037028231219508

2024-02-23

Applied Spectroscopy

Abstract:Terbium- and nitrogen-doped carbon quantum dots (Tb,N@CQDs) were greenly created employing microwave synthesis from plum juice with terbium nitrate. The synthesis of Tb,N@CQDs was fast (7 min) with a high quantum yield (35.44%). Tb,N@CQDs were fully characterized using transmission electron microscopy, Zeta potential analysis, fluorescence, and ultraviolet spectroscopy. Omadacycline (OMC) is a broad-spectrum tetracycline that has been recently approved by the United States Food and Drug Act (FDA) in October 2018. OMC is the first oral aminomethylcycline class antibiotic drug that was authorized for the treatment of acute skin structure infections and community-acquired pneumonia. Tb,N@CQDs exhibited emission at 440 nm after excitation at 360 nm, where their fluorescence intensity showed a reduction upon addition of OMC. The experimental parameters were further studied and optimized. The linear range was between 40 and 60 parts per billion (ppb), with (limit of quantitation) equal to 34.78 ppb. The proposed approach was validated for bioanalytical purposes using FDA guidelines and proved to be straightforward, cheap, highly sensitive, and very selective, which can be used in clinical studies. The developed approach proved to be green using some current assessment metrics and was applied successfully for the determination of OMC in human plasma, milk, and pharmaceutical formulations as well as pharmacokinetic study.

spectroscopy,instruments & instrumentation
Physicochemical and In-Vitro Bioequivalence Analysis of Some Oral Solid-Dosage Metronidazole Formulations

Bunu SJ

DOI: https://doi.org/10.23880/beba-16000221

2023-07-04

Bioequivalence & Bioavailability International Journal

Abstract:Background: Metronidazole is a 5-nitroimidazole antimicrobial agent, widely used in the treatment of infections caused by Trichomonas vaginalis, such as trichomoniasis, pseudomembranous colitis, and symptomatic amoebiasis resulting from anaerobic bacteria. Aim: The study aimed to qualitatively determine the quality and in-vitrobioequivalence of selected brands of metronidazole tablet dosage forms used in the management of infectious diseases. Method: The British Pharmacopeia (BP) Standard methods were followed to conduct weight uniformity, disintegration time, hardness, and friability tests. For the Thin Layer Chromatographic (TLC) Fingerprinting, 0.1g of the brands were weighed and dissolved ins 50 ml methanol (50%). The stock solution was prepared using 50% methanol and 50% dichloromethane and was transferred into the Chamber and allowed to stand for about 45 minutes; the plates were viewed under UV-VIS Spectrophotometer at 365 nm. Result: All the brands complied with the acceptable friability limit, and disintegrated within the appropriate time of not more than 15 minutes as specified in BP, for uncoated tablets. The tablets were found to have a dissolution profile of at least 70% of the active ingredient taken at 45 minutes from the dissolution medium as stated in BP. The analysis showed the consistency of concentration of the selected tablet brands with the label claims. Conclusion: The TLC procedure used in the analysis was accurate and precise, no interference was observed from the excipients. Thus, this method can be used in the routine quality control of metronidazole solid dosage form.
Sensitive and Cost-Effective TLC-Densitometric Method for Determination of Metronidazole and Tinidazole in Tablets

Alina Pyka-Pająk

DOI: https://doi.org/10.3390/pr12040643

IF: 3.5

2024-03-25

Processes

Abstract:A sensitive, easy-to-use, fast, and cost-effective TLC-densitometric method was developed for the separation of metronidazole, secnidazole, ornidazole, tinidazole, and 2-methyl-5-nitroimidazole and for the determination of metronidazole and tinidazole in Metronidazole Polpharma and Tinidazolum Polpharma tablets. Analyses were performed on chromatographic plates precoated with silica gel 60F254 using chloroform + methanol + diethylamine in a volume ratio of 9:1:1 as the optimal mobile phase. The method has been validated. The intraday and interday precision values for the three different concentrations ranged from 0.99% to 1.48% and 0.89% to 1.76%, and the precision values ranged from 1.13% to 2.48% and 0.95% to 2.49% for metronidazole and tinidazole, respectively. The limit of quantification (LOQ) was 0.036 and 0.066 μg/spot for metronidazole and tinidazole, respectively. The mean recovery was 103.1% and 100.6% for metronidazole and tinidazole, respectively. The content of metronidazole and tinidazole in tablets in relation to the content declared by the manufacturer was 101.3% and 99.8%, respectively. The obtained results were verified using the pharmacopeial method. The presented method is fast, sensitive, precise, selective, accurate, and robust. It allows for the analysis of several samples on one chromatography plate at the same time.

engineering, chemical
Electrochemical Detection of Metronidazole by the Fabricated Composites of Orthorhombic Iron Tungsten Oxide Decorated with Carbon Nanofiber Composites Electrode

Kiruthika Mariappan,saranvignesh Alagarsamy,Shen-Ming Chen,Sakthinathan Subramanian

DOI: https://doi.org/10.1149/1945-7111/acbe6b

IF: 3.9

2023-02-25

Journal of The Electrochemical Society

Abstract:Metronidazole (MTD) is a common antibiotic used to treat various pathogens and protozoal infections in humans and domestic animals. This drug is, however, prohibited in various countries owing to its extremely precarious properties. Hence, the low-limit detection of MTD in the environment is more important because it is very impactful and affects human health. Iron tungstate (Fe2WO6) has been produced by the hydrothermal method and the carbon nanofibers (CNF) prepared from the electrospinning technique. After that, CNF/Fe2WO6 composite decorated glassy carbon electrode (GCE) was used for the electrochemical detection of MTD. Here, the different physicochemical characterization studies were used to confirm the CNF/Fe2WO6 composite. Moreover, electrochemical impedance spectroscopy, cyclic voltammetry studies, and differential pulse voltammetry have been used for the electrochemical studies of modified electrodes. The electrochemical results of GCE/CNF/Fe2WO6 electrodes exhibited an excellent electrochemical response at -0.5 V. The MTD detection limit has been calculated by the very low detection limit concentrations (0.013 μM). Further, the GCE/CNF/Fe2WO6 electrodes performed at high sensitivity (1.55 μA μM−1 cm-2) with a wide linear range (0.01-1792 μM). Besides, the GCE/CNF/Fe2WO6 have excellent repeatability, reproducibility, stability, and real sample analysis performances.

electrochemistry,materials science, coatings & films
Synthesis and Structure Characterization of Three Pharmaceutical Compounds Based on Tinidazole

Na Li,Yuting Chen,Ruixin Chen,Mingjuan Zhang,Tingting Wu,Kang Liu

DOI: https://doi.org/10.3390/cryst13060947

IF: 2.7

2023-06-12

Crystals

Abstract:Tinidazole (TNZ), a 5-nitroimidazole derivative, has received increasing attention due to its pharmacological activities in treatment for amebic and parasitic infections. In this paper, we synthesized three novel drug supramolecular compounds successfully based on TNZ. The three compounds discussed were formed by TNZ and 2,6-dihydroxybenzoic acid (2,6-DHBA), 4-methylsalicylic acid (4-MAC), and 5-chloro-2-hydroxybenzoic acid (5-C-2-HBA). The N-H···O and O-H···O hydrogen bonds and weak C-H···O hydrogen bonds are the primary intermolecular forces in the construction of the three compounds. Crystal structure analysis revealed that all the compounds exhibit three-dimensional frameworks consisting of non-covalent interactions. Furthermore, six primary synthons, I R22 (8), II R21(6), III R22(12), IV R33(9), V R22(12), VI R33(9), formed through various hydrogen bonds are found in the three compounds. Moreover, the resulting pharmaceutical supramolecular compounds show improved stability. Single-crystal X-ray diffraction analysis, infrared spectroscopy (IR), element analysis, and thermogravimetric analysis (TGA) are reported.

materials science, multidisciplinary,crystallography
In Situ Reactivity of Electrochemically Generated Nitro Radical Anion on Tinidazole and Its Monomeric and Dimeric CuII Complexes on Model Biological Targets with Relative Manifestation of Preventing Bacterial Biofilm Formation

Promita Nandy,Ramesh C Santra,Dibyajit Lahiri,Moupriya Nag,Saurabh Das

DOI: https://doi.org/10.1021/acsomega.1c04822

IF: 4.1

2022-03-01

ACS Omega

Abstract:Formation of nitro radical anion (-NO2 •-) and other reduction products of 5-nitroimidazoles, although important for antimicrobial activity, makes the drugs neurotoxic. Hence, an appropriate generation and their role in the free radical pathway needs proper realization. This was attempted by studying the action of tinidazole and its CuII complexes on model targets (nucleic acid bases and calf thymus DNA). Results obtained were correlated with studies on biological species where prevention of biofilm formation on Staphylococcus aureus and Pseudomonas aeruginosa was followed. Tinidazole and its CuII complexes subjected to electrochemical reduction in aqueous solution, under de-aerated conditions, interact with model nucleic acid bases and calf thymus DNA. These model targets were followed to realize what happens when such compounds undergo enzymatic reduction within cells of microorganisms that they eventually kill. Studies reveal that CuII complexes were better in modifying nucleic acid bases and calf thymus DNA than tinidazole; damage caused to nucleic acid bases was correlated with that caused to DNA, indicating that compounds affect DNA rich in thymine and adenine. Minimum bactericidal concentrations on sessile S. aureus and P. aeruginosa for the monomeric CuII complex were 12.5 and 20.25 μM respectively, while those for the dimeric complex were 40.0 and 45.0 μM, respectively. Biofilm formation by P. aeruginosa and S. aureus and viability count of sessile cells were also determined. CuII complexes of tinidazole brought about substantial reduction in carbohydrate and protein content in S. aureus and P. aeruginosa. Downregulation of quorum sensing signaling mechanism viz. reduced production of pyocyanin and elastase during biofilm formation was also detected. CuII complexes showed much higher tendency to prevent biofilm formation than tinidazole, almost comparable to amoxicillin, an established drug in this regard.
Application of the green analytical procedure index to the simultaneous analysis of co-formulated tinidazole and ciprofloxacin in pure form, tablet dosage form, and human plasma using an environmentally friendly micellar high-performance thin-layer chromatographic technology

DOI: https://doi.org/10.1007/s00764-023-00225-4

2023-02-13

Abstract:In individuals with chronic refractory pouchitis and other gastrointestinal disorders, the combination of ciprofloxacin (CIP) and tinidazole (TIN) is beneficial and safe. As a result, a green micellar high-performance thin-layer chromatographic (HPTLC) approach for the immediate analysis of TIN and CIP in pure, spiked human plasma, and co-formulated tablet dosage form has been developed. It is rapid, extremely easy, sensitive, cost-effective, and environmentally friendly. The stationary phase was Merck aluminum HPTLC plates covered with silica gel 60 F 254 , while the mobile phase was acetone–ethanol–2% watery sodium dodecyl sulfate (3:4:2, V/V ). For quantification of both medications, the densitometric scanner was set at 310 nm. For TIN and CIP, this chromatographic separation yielded symmetric, compact peaks with R F values of (0.22 ± 0.009) and (0.42 ± 0.007), respectively. At 310 nm, the separated spots were densitometrically scanned. For TIN and CIP, the detection thresholds were 6.7 ng/band and 25.03 ng/band, respectively. For TIN and CIP, the quantification limits were 20.3 ng/band and 75.25 ng/band, respectively. The approach was validated according to International Council for Harmonisation (ICH) principles and then used to determine the researched medicines in their various pharmaceutical dosage forms, and human plasma yielding an exceptional percent of recovery. In terms of precision and accuracy, the results were in great accordance with the published approach. This method is suitable for the sequential analysis of the two drugs in pure form, tablet dosage forms, and spiked human plasma due to its simplicity, speed, greenness, robustness, and low cost.

chemistry, analytical
Construction of Nickel Tungsten Oxide Anchored Carbon Nanofibers Modified with Glassy Carbon Electrode for Enhanced Electrochemical Detection of Metronidazole in Urine and Environmental Water Sample

Kiruthika Mariappan,Sakthinathan Subramanian,Tse-Wei Chen,Shen-Ming Chen,saranvignesh Alagarsamy,Te-Wei Chiu,Amal M Al-Mohaimeed,Wedad A Al-onazi,Mohamed Soliman Elshikh

DOI: https://doi.org/10.1149/1945-7111/ad31f1

IF: 3.9

2024-03-10

Journal of The Electrochemical Society

Abstract:Metronidazole (MTD) is an antibiotic that is commonly used to treat pathogens and protozoal infections, which have a highly harmful impact on human health and domestic animals. Hence, the detection of MTD is highly necessary to avoid environmental pollution. The hydrothermal technique has been utilized to prepare Nickel Tungsten oxide (NiWO4) nanosheets which were anchored with the carbon nanofiber (CNF) to produce CNF/NiWO4 nanocomposite, the nanocomposite coated on the glassy carbon electrode (GCE) and applied to the electrochemical detection of MTD. Besides, field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), energy dispersive X-ray analysis (EIS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy. Moreover, electrochemical impedance spectroscopy (EIS), cyclic voltammetry studies (CV), and differential pulse voltammetry (DPV) were also handled for the identification of the electrochemical behavior of the GCE/CNF/NiWO4 electrode responses. Finally, the CNF/NiWO4 electrode shows a low detection limit of 0.4 μM, a wide linear response range of 0.01-650 μM, and a higher sensitivity of 0.274 μA μM−1 cm−2, with better repeatability, reproducibility, and excellent stability. Finally, the prepared GCE/CNF/NiWO4 electrodes were employed to detect MTD in tap water and urine samples with acceptable recoveries.

electrochemistry,materials science, coatings & films
Electrochemical Modification of Metronidazole and its Application as Antibacterial and Potential Drug Agent

Samuel Attah Egu,Sunday Okpanachi Idih,Favour Idih,Ruth Foluke Aminu,Lawrence Achimugu,Aminu Omale,Jamila Audu Omale,Lian Ojotule Abah,Emmanuel Amlabu

DOI: https://doi.org/10.2174/0115701808281133240424055511

2024-04-29

Letters in Drug Design & Discovery

Abstract:Background: Drug resistance poses a threat to global health given the disturbing rate at which microbiological illnesses are rising and the widespread use of antibiotics. While naturally occurring antibiotics reduce the likelihood of bacterial resistance, recognized drugs can develop the same properties when structurally modified. Metronidazole has been targeted to achieve this feat. Objective: The purpose of this work is to enable the structural modification of metronidazole by means of electric current, using inexpensive, easily accessible magnesium ribbon as electrodes in order to produce a novel, effective antibiotic. Method: With magnesium ribbon electrodes, metronidazole is modified electrochemically, in an undivided cell system. Ultraviolet-visible (UV-Vis), Fourier Transform Infrared (FTIR), and Gas Chromatography-Mass Spectrometry (GC-MS) were used to characterize the product. Antibacterial activity was evaluated using the agar well diffusion method and Wistar rats were used for in vivo toxicity assessment. Result: 2-Methyl-1-vinyl-1H-imidazol-5-amine showed good antibacterial activities compared to the standard nitrofurantoin and toxicity evaluations using Wistar rats revealed that the product might induce dose-dependent variations in kidney function biomarkers, with doses of 100 mg/kg and below. However, when the compound was administered orally, there was no significant effect on liver function, even at a dose of 1000 mg/kg. Conclusion: These results point to the modified metronidazole's potential as a potent antibiotic with controllable toxicity, indicating that additional research into its pharmacological uses is necessary.

chemistry, medicinal
Electrochemical Sensing of Triazole Drugs based on Carbon Based Nanocomposites: A Review

Shubham Sharma,Sameena Mehtab,Minakshi Pandey,MGH Zaidi,Shristi Rawat

DOI: https://doi.org/10.52711/0974-360x.2023.00162

2023-02-28

Research Journal of Pharmacy and Technology

Abstract:India is the nation with international boarder wherein a huge number of soldiers are deployed. Fungal infections are a common complaints suffered by military personnel at warm, damp or wet environments. Anti-fungal drugs have their application in the treatment of fungal infections. They do so by either killing or controlling the fungi in the host with low toxicity. The Heterocyclic compounds with triazole linkages are known for their effective anticancer and antifungal properties. The sensitive, robust, reproducible quantification of triazole can take place at fast rates without any involvement of multiple steps of sample preparation. This is all possible because of the electrochemical activity of the triazole. There has been a significant increase in Carbon-based nanomaterials being preferred for sensor materials development. The properties of Carbon-based nanomaterials such as inherent electrical conductivity, chemical stability, strong adsorption capacity, and good biocompatibility are what make it preferable. The materials with these properties include an array of carbon compounds such as carbon nanotubes (CNTs), fullerenes, carbon nanofibers, carbon black, etc. CNTs are often counted in the list of important carbonaceous materials and they're also suitable for the fabrication of the electrodes. This is possible because of its high surface area, and good electrical properties. The materials based on CNTs are used to produce sensors that are hybrid in nature, drug delivery, and high-performance composites for plants to identify pathogens. Methods based on high performance liquid and thin layer chromatography, gas chromatography and spectrophotometry involves a series of sample preparations and are executed over costly equipments. Owing to numerous advantages such as rapid response, high performance, cost effective, high sensitivity and selectivity, electrochemical sensors became increasingly promising tool over other conventional analytical methods. Nanohybrid based electrochemical sensor is used for trace level estimation of triazole drugs in pharmaceutical dosage and biological samples.
Photocatalytic degradation of metronidazole from aquatic solution by TiO2-doped Fe3+ nano-photocatalyst

M. Malakootian,N. Olama,M. Malakootian,A. Nasiri

DOI: https://doi.org/10.1007/s13762-018-1836-2

2018-06-08

International Journal of Environmental Science and Technology

Abstract:Indiscriminate consumption of antibiotics, their discharge into the environment, and the development of resistant genes in a natural ecosystem are ever-increasing global threats. Metronidazole is applied to treat infection diseases caused by anaerobic bacteria and protozoa. In this research, TiO2/Fe+3 was used as a heterogeneous nano-photocatalyst for the degradation of metronidazole with UV-C radiation as the energy source. Parameters tested in the removal process were pH = 3, 7, and 11; antibiotic concentration of 80 mg/L; contact times of 30, 60, 90, and 120 min; and nano-photocatalyst of TiO2/Fe+3 with concentrations of 30, 60, 90, 250, 500, 750, and 1000 mg/L. The photocatalytic degradation kinetics of metronidazole was studied. Optimal conditions were achieved on synthetic solutions; then, all experiments were performed on wastewater from the pharmaceutical industry. Antibiotic concentrations were measured using an HPLC device. All tests were replicated three times according to the standard methods of water and wastewater experiments, the 20th edition. Data were analyzed using SPSS 19 and the statistical test ANOVA. The optimal conditions for removing metronidazole from synthetic solution included, 500 mg/L for nano-photocatalyst concentration, pH = 11 and 120 min contact time. Removal efficiency of antibiotic under optimal conditions was 97% from synthetic solutions and 69.85% from pharmaceutical wastewater. Finally, Fe+3–TiO2/UV-C were identified as a promising technique for the removal of metronidazole with high efficiency from aqueous solutions.

environmental sciences
Physical and photo-electrochemical characterization of Ca2Fe2O5 for metronidazole antibiotic degradation under sunlight

F. Saib,F.M. Laoui,L. Aoudjit,F. Touahra,G. Rekhila,D. Lerari,Y. Azoudj,R. Chebout,K. Bachari,M. Trari,A. Abdi

DOI: https://doi.org/10.1016/j.optmat.2023.114806

IF: 3.754

2024-02-01

Optical Materials

Abstract:This study aims to investigate and describe the properties of the brownmillerite Ca2Fe2O5, synthesized from nitrates precursors. The X-ray diffraction showed that the single phase crystallizes in an orthorhombic symmetry (Space Group: Pcmn) with a specific surface area of 8.16 m2 g−1. The d-d transition of Fe3+: in octahedral coordination gives a direct optical band gap (2.02 eV) as determined by diffuse reflectance spectroscopy in agreement with the brown color of the oxide. The first one is due to the charge transfer O2−: 2p → Fe3+: t 2g . This enables the material to exploit a large part of the solar radiation for photocatalytic purposes. The chemical stability of Ca2Fe2O5 is demonstrated over the pH range (5–12). The capacitance-potential plot revealed n-type conduction; a flat band potential of (E fb) 0.40 VSCE and electron concentration (N A) of 8.57 × 1024 m−3 were obtained in Na2SO4 (0.1 M) solution. The intensity-potential (J - E) profile showed electrochemical stability with oxygen intercalation in the layered lattice. The conduction band is more anodic than the level of O2/O2 •, allowing the successful oxidation of Metronidazole by •O2 − radical under visible light. The photodegradation of Metronidazole (MNZ) was successfully achieved at an initial concentration of 10 mg/L under solar radiation and a photocatalyst dose of 1 g/L at a free pH after 120 min of exposure and obeys a first-order kinetic with a rate constant of (33.7 × 10−3 min−1).

materials science, multidisciplinary,optics
Oxidative degradation of metronidazole by acidic potassium permanganate : A spectrophotometric kinetic study

Gautam Sheel Thool,Savita Pataila,Bhawana Jain,Ajaya K. Singh,P. Sharma

Abstract:: The kinetics of oxidation of metronidazole (MTZ) by acidic KMnO 4 has been studied spectrophotometrically. The stoichiometry of reaction is found to be 5 : 2 ratio the main oxidation product were identified as 2-methyl-5-nitro-1-imidazole ethanol. The reaction was fractional order with respect to [MTZ] and [H + ] and first order with respect to permanganate. The effect of added dielectric constant and ionic strength were studied. The reaction constant and overall thermodynamic activation parameters were calculated. The observed results have been explained through suitable mechanism and the relative rate law have been deduced on the basis of the experimental results and kinetic studies. Present work mainly deals with kinetics and oxidation of MTZ at different temperatures (288–303 K).

Chemistry

Spectroscopic Characterization of Biofield Treated Metronidazole and Tinidazole

Spectroscopic Characterization of Disodium Hydrogen Orthophosphate and Sodium Nitrate after Biofield Treatment

Influence of the Biofield Energy Therapy on the Physicochemical and Thermal Properties of Sulfamethoxazole

A comparative study of the carbon-based nanostructures for the delivery and detection of drug metronidazole

Application of Ni,Ti-Organic Framework-Based Electrochemical Sensor for Determination of Metronidazole and Oxazepam in Real Sample

Spectroscopic elucidation (FT-IR, FT-Raman and UV-visible) with NBO, NLO, ELF, LOL, drug likeness and molecular docking analysis on 1-(2-ethylsulfonylethyl)-2-methyl-5-nitro-imidazole: An antiprotozoal agent

Biofield Treatment: An Alternative Approach to Combat Multidrug-Resistant Susceptibility Pattern of Raoultella ornithinolytica

Comparison among the clinical curative effects using different 5'-nitroimidazole drugs in treating anaerobic or trichomonal vaginitis

Design, Characterization, and Bioanalytical Applications of Green Terbium- and Nitrogen-Doped Carbon Quantum Dots as a Fluorescent Nanoprobe for Omadacycline Analysis

Physicochemical and In-Vitro Bioequivalence Analysis of Some Oral Solid-Dosage Metronidazole Formulations

Sensitive and Cost-Effective TLC-Densitometric Method for Determination of Metronidazole and Tinidazole in Tablets

Electrochemical Detection of Metronidazole by the Fabricated Composites of Orthorhombic Iron Tungsten Oxide Decorated with Carbon Nanofiber Composites Electrode

Synthesis and Structure Characterization of Three Pharmaceutical Compounds Based on Tinidazole

In Situ Reactivity of Electrochemically Generated Nitro Radical Anion on Tinidazole and Its Monomeric and Dimeric CuII Complexes on Model Biological Targets with Relative Manifestation of Preventing Bacterial Biofilm Formation

Application of the green analytical procedure index to the simultaneous analysis of co-formulated tinidazole and ciprofloxacin in pure form, tablet dosage form, and human plasma using an environmentally friendly micellar high-performance thin-layer chromatographic technology

Construction of Nickel Tungsten Oxide Anchored Carbon Nanofibers Modified with Glassy Carbon Electrode for Enhanced Electrochemical Detection of Metronidazole in Urine and Environmental Water Sample

Electrochemical Modification of Metronidazole and its Application as Antibacterial and Potential Drug Agent

Electrochemical Sensing of Triazole Drugs based on Carbon Based Nanocomposites: A Review

Photocatalytic degradation of metronidazole from aquatic solution by TiO2-doped Fe3+ nano-photocatalyst

Physical and photo-electrochemical characterization of Ca2Fe2O5 for metronidazole antibiotic degradation under sunlight

Oxidative degradation of metronidazole by acidic potassium permanganate : A spectrophotometric kinetic study