Abstract:Piezoelectric materials have been widely applied in actuation and sensing device for Structural Health Monitoring (SHM). Composite materials are taking a more and more important role in load-bearing components due to their high-strength, lowweight properties in aerospace engineering. By distributing piezoelectric properties throughout the composite structural component, each location of the material can be used as an actuator and a sensor to generate and receive ultrasonic waves. This enables the construction of dense interrogation probe arrays for active and high-resolution structural sensing. This paper presents the virtual time-reversal tomography for impact damage detection in self-sensing piezoelectric composite plates. A systematic numerical investigation of ultrasonic guided-wave dynamics in anisotropic piezoelectric composite plates is first conducted. The guided wave generation mechanism and characteristics are studied using the harmonic analysis of a finite element model simulating the tuning procedure. Subsequently, an impact damage is introduced and modelled as a group of cone shape delaminations and stiffness losses within the laminate layers through the thickness direction, so as to approximate the practical impact damage. 3D transient dynamic coupled-field finite element models are further adopted to simulate the procedure of guided wave generation, propagation, interaction with the impact damage, and reception in a piezoelectric composite laminate. The contact dynamics are considered to capture the possible nonlinear interactions between guided waves and the impact damage, which would induce Contact Acoustic Nonlinearity (CAN) into the guided waves. Furthermore, the wave damage interaction coefficients (WDICs) are adopted to depict the scattering patterns of guided waves, from which the sensitive wave-path directions can be inferred for active sensing array design. Finally, the predictive simulation signals from the 3D finite element models are fed into the virtual time-reversal probabilistic tomography algorithm to locate and image the impact damage zones. This paper finishes with summary, concluding remarks, and suggestions for future work.

Application of 3-D Laser Scanning Vibrometer in Determination of Free Vibration Frequencies of Composite Plates with Damage

Damage Identification in Various Types of Composite Plates Using Guided Waves Excited by a Piezoelectric Transducer and Measured by a Laser Vibrometer

Experimental Investigation of Damage Detection in Composite Material Structures Using a Laser Vibrometer and Piezoelectric Actuators

Application of Laser Vibrometry to Assess Defects in Ship Hull's Welded Joints' Technical Condition

Damage Detection Of Composite Laminates Based On Vibration Testing

Dynamics-based Damage Detection of Composite Laminated Beams Using Contact and Noncontact Measurement Systems

Diagnosis of early-stage damage to polymer - glass fibre composites using non-contact measurement of vibration signals

Damage Detection Algorithms and Sensor Systems for Laminate Composite Beams

Active flutter suppression of damaged variable stiffness laminated composite rectangular plate with piezoelectric patches

Guided waves in anisotropic and quasi-isotropic aerospace composites: three-dimensional simulation and experiment

The 4th International Conference on Structural Health Monitoring and Integrity Management Virtual Time-reversal Tomography for Impact Damage Detection in Self-sensing Piezoelectric Composite Plates

Curvature mode shape-based damage detection in composite laminated plates

A Novel Superposed Waveform Method for Damage Detection of Composite Laminates

Vibration-Based In-Situ Detection and Quantification of Delamination in Composite Plates

Damage Detection in Composite Structures Via Scanning Laser Doppler Vibrometry Using Linear and Nonlinear Ultrasonic Wave Features

A novel damage characterization approach for laminated composites in the absence of material and structural information

Research laser scanning damage detection method in f-k domain for laminate composite material

Guided Wave Generation And Propagation In Self-Sensing Piezoelectric Composite Plates For Structural Health Monitoring

Fast inverse identification of delamination of E-glass/epoxy laminated composite panels

Modeling of Wave Propagation in Plate Structures Using Three-Dimensional Spectral Element Method for Damage Detection

Structural Health Monitoring System Based on a Concept of Lamb Wave Focusing by the Piezoelectric Array