Abstract:In this study, shot peening (SP) treatment was implemented on a duplex (austenite and ferrite) stainless steel. By using X-ray diffraction residual stress determination and line profile analysis, the residual stress (including macro- and microstress) and microstructure evolutions in the surface layer of the shot peened material were discussed. Results pointed out that the initial thermal stress state were compressive (-80 MPa) in alpha phase and tensile (90 MPa) in gamma phase owing to the different thermal expansion coefficients of the two phases. After SP, the nonreversible plastic deformation of the surface layer and the interior of bulk was the main cause of the macrostresses. SP introduced more compressive residual stress into the gamma phase, the maximum compressive stress in gamma phase was similar to 1.3 times larger than that in alpha phase (-912 vs. -717 MPa) and occurred deeper in the sample interior (similar to 75 vs. 10 mu m). The inhomogeneous partitioning of the plastic strains, which was ascribed to the difference of the relative strength and deformation mechanism between the phases, was the contributing cause of microstresses. The average microstresses in surface layer of shot peened alloy were tensile in alpha phase and compressive in gamma phase, the magnitude of which changed with depth since the phase-specific plastic deformation was also a function of depth. The quantitatively microstructural analysis indicated that more deformation was stored in the gamma phase, the microstrain and dislocation density at the surface in gamma phase were about four and 2.6 times larger than that in alpha phase (7.25 vs. 1.83 x 10(-3), 3.9 vs. 1.5 x 10(15) m(-2)), respectively. Microhardness measurements showed that SP-induced work hardening was more evident in austenite, the hardness of austenitic phase was found significantly higher than that of ferritic phase in near surface region.

Effect of Microstructure Evolution and Corrosion Behavior on Phase Transformation of Nanocrystalline SUS304 Prepared by Dry Ice Shot Peening

Strain-Induced Phase Transformation and Nanocrystallization of 301 Metastable Stainless Steel Upon Ultrasonic Shot Peening

Effect of ultrasonic shot peening on microstructure and properties of 301SS

Characterization of Surface Modification of 347 Stainless Steel Upon Shot Peening

Effect of surface shot peening on microstructure and properties of Super304H austenitic heat-resistant steels

Microstructure Thermostability of Shot Peened Duplex Stainless Steel Surface Layer

Surface Nanocrystallization Mechanism of Additive Manufactured 316L Stainless Steel Via High-Energy Shot Peening

Effect of Ultrasonic Shot Peening on Stress Corrosion of 304 Austenitic Stainless Steel

Surface Nanocrystallization Induced by Shot Peening and Its Effect on Corrosion Resistance of 6061 Aluminum Alloy

Nanocrystallization and α martensite formation in the surface layer of medium-manganese austenitic wear-resistant steel caused by shot peening

Influence of Ultrasonic Shot Peening on Microstructure, Mechanical, and Electrochemical Behavior of 316 Stainless Steel

Micro-structure and Surface Layer Properties of 18Crnimo7-6 Steel after Multistep Shot Peening

Effect of Micro-Shot Peening on the Fatigue Performance of AISI 304 Stainless Steel

Effect of Surface Nanocrystallization on the Sensitization and Desensitization Behavior of Super304H Stainless Steel

Observation of Magnetic Properties and Microstructural Evolution of 301 Stainless Steel Upon Ultrasonic Shot Peening

Influence of Severe Surface Plastic Deformation Induced by Shot Peening on Microstructure and Corrosion Resistance of fine grained 316 L stainless steel

Experimental Study on Macro- and Microstress State, Microstructural Evolution of Austenitic and Ferritic Steel Processed by Shot Peening

Effect of ultrasonic shot peening duration on the microstructure and mechanical properties of CrMnFeCoNi high-entropy alloy

Microstructural Evolution and Mechanical Response of the Surface of 18Crnimo7-6 Steel after Multistep Shot Peening During Annealing

Interpretation for the Fast Sigma Phase Precipitation in the High Intensity Shot Peened Nanocrystallined Super304H Stainless Steel