Abstract:<p>This paper experimentally investigates the effect of the yield strength of longitudinal steel bars and concrete compressive strength on the seismic performance of reinforced concrete (RC) bridge piers. Cyclic loading tests of ten large scale RC bridge piers (including five circular section and five rectangular section) with different longitudinal steel bars grades (varying among HRB335, HRB500E and HRB600) and concrete compressive strengths (i.e., 32.6 MPa and 48.2 MPa) were conducted. Two different steel replacement methods, i.e. equivalent volume and equivalent strength replacements, were adopted for comparison. The seismic performance indexes lateral bearing capacity, deformation capacity, hysteretic energy dissipation and residual displacement were compared and analyzed. The test results indicate that all RC bridge piers show typical flexural failure mode while circular piers show better deformability and hysteretic energy dissipation than rectangular piers. Replacing conventional steel bars HRB335 with same amount of high-strength longitudinal steel bars (HRB500E and HRB600) (i.e. equivalent volume replacement) will increase the lateral bearing capacity (as expected), the yield displacement and the total deformation. Due to the increase in yield displacement, the displacement ductility, the viscous damping ratio and the residual displacement will reduce to some extent. Still, the RC piers reinforced with high-strength steel bars (HSSB) show larger plastic deformation and hysteretic energy dissipation because of greater total deformation and bearing capacity. The transverse reinforcement configurations of circular section provide better restraint to the buckling of longitudinal steel bars than rectangular section, thereby RC bridge piers with circular section show better deformability and hysteretic energy dissipation than rectangular section. The increase in concrete compressive strength reduces the yield displacement, thus enhances the hysteretic energy dissipation and viscous damping ratio at same total deformation. It is worth noting that the effect of concrete compressive strength on the seismic performance of rectangular section is more remarkable than circular section. Replacing conventional longitudinal steel bars with reduced amounts of high-strength steel bars (i.e. equivalent strength replacement) provided comparable flexural strength and deformation capacity, but reducing the residual displacement and hysteretic energy dissipation.</p>

Parametric study of seismic performance of super-elastic shape memory alloy-reinforced bridge piers

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Seismic Performance Assessment of a Multispan Continuous Isolated Highway Bridge with Superelastic Shape Memory Alloy Reinforced Piers and Restraining Devices

Feasibility of using superelastic shape memory alloy in plastic hinge regions of steel bridge columns for seismic applications

Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Performance-based assessment of bridges with steel-SMA reinforced piers in a life-cycle context by numerical approach

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Probabilistic seismic risk assessment of concrete bridge piers reinforced with different types of shape memory alloys

Computational studies on the seismic response of the State Route 99 bridge in Seattle with SMA/ECC plastic hinges

Shape memory alloy-reinforced UHPC tube confined bridge piers for enhancing the seismic resistance of highway bridges

Experimental-analytical investigation of accelerated bridge construction concrete columns with self-centering Fe-SMA bars subjected to near-fault ground motions

Experimental study of a highway bridge with shape memory alloy restrainers focusing on the mitigation of unseating and pounding

Seismic performance of RC bridges with double-column medium height bents retrofitted with SCEBs under near-field ground motions

Seismic Performance Improvement of Steel Moment Resisting Frame Using Shape Memory Alloy

Study on Damage Emergency Repair Performance of A Simple Beam Embedded with Shape Memory Alloys

Seismic resilience of RC bridge with self-centering energy dissipation braces using SMA U-shaped plates

Effect of reinforcement grade and concrete strength on seismic performance of reinforced concrete bridge piers

Experimental Study on the Seismic Behaviour of Reinforced Concrete Bridge Piers Strengthened by BFRP Sheets

Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates

Utilizing a new self-centering hysteresis model to assess the seismic vulnerability of a long-span cable-stayed bridge equipped with SMA wire-based roller bearings