Abstract:An analytical determination algorithm was developed in the linear formulation, and a particular case of determining the stress-deformed state of a multilayer composite material was investigated. The algorithm is based on the use of the stress function (Ery) and the dependence of all indicators of the stress-deformed state of the material of each layer on its shape. Possible external factors affecting the composite structure are given. For the general case of building a composite structure, the sequence of adding the matrix of coefficients and the vector of free members of the system of linear algebraic equations is formed. The solution of the system of algebraic equations is proposed to be carried out by a method similar to the pre-race method, but for blocks of four equations supplemented by two equations of the influence of the previous layer in the calculation. As a result of actions similar to direct and reverse pre-race, we will obtain vectors of coefficient values of expressions of indicators of the stress-deformed state of the material of all layers as component sums. The acceptability of the algorithm for determining stresses and spatial deformations in a separate case of loading a composite sample with square layers is proven. The possibility of using the algorithm for the case of a significant (infinitely large) thickness the farthest from the loaded layer of the composite structure and single-layer (monolithic) material is shown. The following is established: characteristics of the distribution of normal stresses and displacements in the loaded layer of a two-layer composite material. They qualitatively coincide for different values of the Poisson coefficients of the layer materials. The amplitude of stress relief and displacements across the thickness of the loaded layer increases with a decrease in Poisson's ratio. The ratio of extreme values of normal stresses in the material of the loaded layer depends not only on the ratio of the shear moduli or the longitudinal elasticity moduli but also on the ratio of the values of the Poisson coefficients of the materials of the layers.

Evaluation of the Stiffness of a Composite–Metal Joint by the Method of Digital Image Correlation

Identification of the Elastic Stiffness of Composites Using the Virtual Fields Method and Digital Image Correlation

Assessment of Digital Image Correlation Effectiveness and Quality in Determination of Surface Strains of Hybrid Steel/Composite Structures

Application of Digital Image Correlation to Evaluate Strain, Stiffness and Ductility of Full-Scale LVL Beams Strengthened by CFRP

Study of Structural Composite Joint Damage by the Digital Image Correlation

Elastic Property Evaluation of Fiberglass and Epoxy Resin Composite Material Using Digital Image Correlation

Experimental and numerical investigation on failure behaviour of aluminum-polymer friction stir composite joints

Damage and Fracture Evaluation of Granular Composite Materials by Digital Image Correlation Method

Experimental study of postcritical deformation stage realization in layered composites during tension using digital image correlation and acoustic emission

Assessment of Composite Aluminum Adhesive Joints Using Digital Image Correlation

Determination of the stress-deformed state of a multilayer composite

Digital Image Correlation Analysis of Strain Fields in Fibre-Reinforced Polymer–Matrix Composite under ±45° Off-Axis Tensile Testing

Parametrisation of Uniform Deformation in Ductile Metals Using Digital Image Correlation Technology

Full-Field Measurement of Residual Stresses in Composite Materials Using the Incremental Slitting and Digital Image Correlation Techniques

Actual methods of full-scale metal-composite aircraft structures static testing with the use of information systems

Application of Digital Image Correlation for Strain Mapping of Structural Elements and Materials

Digital Image Correlation Analysis of Fatigue Degradation of Layered Polymer Composites (Polyetheretherketone/Polyetherimide, PEEK/PEI) with Carbon-Fiber Fabric Prepreg

Image-Based Inertial Impact Test for Composite Interlaminar Tensile Properties

Two-Dimensional Meshfree-Based Digital Image Correlation for Strain-Displacement Measurement

Simulation of the Hybrid Carbon-Aramid Composite Materials Based on Mechanical Characterization by Digital Image Correlation Method

Nondestructive evaluation of carbon-fiber composites using digital image correlation, acoustic emission, and optical based modal analysis