Abstract:Lithium-ion batteries undergo structural deformation during operation because of the electrochemical-induced strain caused by the insertion of lithium ions inside the active material of the electrodes. In this work, the mechanical characteristic, i.e. thickness change, of batteries with different chemistries (lithium iron phosphate and lithium cobalt oxide) and formats (prismatic and pouch) is measured in-operando and with different current rates. A dedicated test bench is built to carry out the measurements with contactless triangulation optical sensors, sensing the displacement of the battery surfaces. The results are critically discussed, justifying the trajectory of the thickness change observed experimentally with the mechanical properties of the electrode's active materials. Furthermore, the results obtained with the batteries of different chemistries are compared, discussing the reasons underlying these differences. Statistical considerations on the results, such as repeatability errors and cell-to-cell differences, are provided as well. The mechanical characteristic appears as a three-stage linear curve, with two deflection points between the linear sections, and proportional to the state of charge of the battery. In fact, the mechanical characteristic tells the amount of lithium ions stored in each electrode, which together with the stoichiometric range defining the electrodes balancing, is closely related to the state of charge. Then, these measurements reveal an interesting tool for evaluating the state of charge. The two deflection points of the mechanical characteristic are linked to graphite stage changes. Then, these measurements carry the same information about battery degradation as the peaks in differential voltage analysis. The advantage is that the deflection points remain visible at any current rate, but the peaks in the differential voltage analysis vanish at high current rates. Then, these preliminary studies of the mechanical characteristic evidence it can become a promising alternative tool for evaluating the state of health as well.

Studies on the medium-frequency impedance arc for Lithium-ion batteries considering various alternating current amplitudes

Revealing Relationship Between in Situ Impedance and Lithium Plating Onset Based on Lithium–Graphite Half-Cells

Time-frequency Analysis of the Spatial Distribution for Li+concentration in the Electrolyte Throughout the Full Battery

Modeling current-rate effects in lithium-ion batteries based on a distributed, multi-particle equivalent circuit model

Electrochemical model of lithium-ion battery for wide frequency range applications

Two- and Three-Electrode Impedance Spectroscopy of Lithium-Ion Batteries

Impedance of Lithium Ion Batteries — Basic Models and Differential Analysis

Studies of Interfacial Reaction Characteristics for High Power Lithium-ion Battery

Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application

Symmetric Cell Approach Towards Simplified Study of Cathode and Anode Behavior in Lithium Ion Batteries

Impedance Characterization of Lithium-Ion Batteries Aging under High-Temperature Cycling: Importance of Electrolyte-Phase Diffusion

Study on lithium plating boundaries of lithium-iron battery at low temperature in alternating current heating based on an electrochemical model

A Modeling Framework of Electrochemo-Mechanics of Lithium-Ion Battery: Part I. Impedance Response of Single Particle

Mechanical characterization of lithium-ion batteries with different chemistries and formats

Theory of Impedance Spectroscopy for Lithium Batteries

Experimental and Model Analysis of the Thermoelectric Characteristics of Serial Arc in Prismatic Lithium-Ion Batteries

An Agglomerate Model For The Impedance Of Secondary Particle In Lithium-Ion Battery Electrode (Vol 161, Pg E3202, 2014)

Electrochemical impedance spectroscopy analysis for lithium carbon fluorides primary battery

An Agglomerate Model for the Impedance of Secondary Particle in Lithium-Ion Battery Electrode

A variable-frequency self-heating strategy for lithium-ion batteries based on an electrochemical impedance-thermal coupling model applicable to a wide frequency range

Lithium-ion battery modeling using CC–CV and impedance spectroscopy characterizations