Abstract:In this study, porous activated carbon was produced from coffee waste and used as an effective adsorbent for the removal of humic acid (HA) from seawater and methyl orange (MO) dye from aqueous solutions. Phosphoric acid H3PO4 was used as an activating agent for the chemical activation of these agricultural wastes. The characterization of the activated carbon obtained using a scanning electron microscope (SEM), Fourier-transform infrared (FTIR) spectroscopy analysis, X-ray diffraction (XRD) and the Brunauer–Emmett–Teller (BET) method revealed that the activated carbon products exhibited high porosity and the formation of various functional groups. The effects of different parameters were examined using batch adsorption experiments, such as the adsorbent masses, pH, initial pollutant concentration and contact time. The results show that the performance increased with an increased adsorbent mass (up to 0.25 g/L) and decreased initial concentration of the adsorbent tested. On the other hand, this study clearly showed that the adsorption efficiency of the MO on the raw spent coffee grounds (SCGs) waste was around 43%, while no removal was observed for the humic acid. The experiments demonstrated that the activated carbon synthesized from the used coffee grounds (the efficiency was compared with commercial activated carbon (CAC) with a difference of 13%) was a promising alternative to commercially available adsorbents for the removal of humic acid from seawater. To understand and elucidate the adsorption mechanism, various isothermal and kinetic models were studied. The adsorption capacity was analyzed by fitting experimental data to these models. The experimental data for methyl orange dyes were analyzed using Langmuir and Freundlich isothermal models. The Freundlich isotherm model provided a superior fit to the equilibrium data, as indicated by a higher correlation coefficient (R2) than that of the Langmuir model. The maximum adsorption was observed at pH 3. The Freundlich adsorption capacity was found to be 333 mg/g adsorbent. The PAC showed a high adsorption capacity for the MO and HA. The PAC showed the highest adsorption capacities for the HA and MO compared with the other adsorbents used (SCGs and CAC) and would be a good material to increase the adsorption efficiency for humic acid removal in the seawater pretreatment process. In addition, the prepared AC BET surface area was 520.40 m2/g, suggesting a high adsorption capacity. This makes the material potentially suitable for various applications that require a high surface area. These results indicate that high-quality sustainable activated carbon can be efficiently produced from coffee waste, making it suitable for a wide range of adsorbent applications targeting various pollutants.

Preparation of Waste Coffee-grounds Carbon and Study on Phenol Adsorption Ability

Comparison of Carbonized Materials from Wastes of Different Origin for Nonylphenol Removal by Adsorption

Preparation of Expanded Graphite-based Carbon/Carbon Composites and Its Adsorption Properties on Phenol

Preparation of molded biomass carbon from coffee grounds and its CH4/N2 separation performance

Activated Carbon Prepared from Waste Coffee Grounds: Characterization and Adsorption Properties of Dyes

Adsorption treatment of phenolic wastewater by activated carbon:a review

PREPARATION AND CHARACTERISTICS OF CARBONACEOUS ADSORBSENTS OBTAINED FROM WASTE CATION-EXCHANGE RESINS

Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

Preparation of imprinted phenol gel with ultra-high adsorption capacity based on porous biochar: 5-stage tandem column, response surface method, and mechanism analysis

Preparation of High-Performance Activated Carbon from Coffee Grounds after Extraction of Bio-Oil

Preparation and application of porous activated carbon using phenolic distillation residue

Effect of pore-forming agent on degradation of phenol by iron tailings based porous ceramics

A study on the preparation of pitch-based high-strength columnar activated carbon and mechanism of phenol adsorption from aqueous solution

One-pot Synthesis of Ultrahigh Surface Area Porous Carbon from Coal Tar Residue: Characterization and Application in Phenol Removal

Role of Maillard Reactions in Co-Pyrolysis of Lignite and Spent Coffee Grounds: Fixation of Nitrogen in Semicoke and Improved Adsorption of Phenols

Adsorption of phenol from aqueous solution on activated carbons prepared from antibiotic mycelial residues and traditional biomass

Phenol removal via activated carbon from co-pyrolysis of waste coal tar pitch and vinasse

Sustainable Activated Carbon from Agricultural Waste: A Study on Adsorption Efficiency for Humic Acid and Methyl Orange Dyes

Adsorption of phenol on CO2-treated activated carbon

Preparation of Waterborne Polyurethane Foam with Active Carbon and Its Adsorption for Phenol in Aqueous Solution

Characteristics of activated carbon from sludge and peanut shell and its application for phenol adsorption