Abstract:Purpose Cracking, deformation and rutting are the most prevalent types of pavement distress, and these deformations and flow characteristics greatly distress the pavement features while also limiting its use. In India, on the other hand, more than 300 million scrap tyres are generated each year, and their disposal has become a severe environmental issue. Furthermore, the scrap generated by the used tyre must be disposed of properly. Hence, this study presents the experimental investigations of bitumen incorporating with Crumb rubber as main additive along with SBS polymer, to enhance the engineering property. Design/methodology/approach Crumb rubber (CR) was used as an additive along with styrene–butadiene–styrene (SBS) polymer to enrich the engineering qualities of the bitumen to reduce the disposal problem of scrap tyres and reduce the risk of environmental pollution. Because SBS polymer is expensive, response surface methodology modelling's central composite design (CCD) was used to optimise the number of tests. CCD modelling's input factors (process variables) were the inclusion rates of SBS and CR, which ranged from 2% to 5% and 4% to 10%, respectively, by total weight. Furthermore, the influence of SBS polymer and CR on the characteristics of modified bitumen was prioritised. Findings The addition of SBS and CR enhanced the bitumen's penetration resistance at service temperatures. Furthermore, increasing the SBS and CR concentration affected the flow characteristics of the modified bitumen and enhanced its viscosity. The addition of SBS and CR as bitumen modifiers increased penetration resistance by 24.06%. The Dynamic Shear Rheometer test demonstrated that the complex modulus of virgin bitumen increases with increasing SBS and CR content, which is consistent with the shifting softening point trend. The dosing rate of up to 3.5% SBS and 11% CR considerably contributed to the creation of polymer link networks, which increased the complex modulus of the bitumen by 16.5%. The CCD model's analysis of variance and Pareto bar chart demonstrated that the dose of CR is significant in improving the engineering features of the virgin bitumen rather than the SBS. Originality/value The utilisation of CR as a bitumen modifier may solve the problem of waste tyre disposal while also lowering the risk of environmental damage. Furthermore, because the presence of CR increased the engineering properties, particularly the complex modulus of virgin bitumen, the use of CR in combination with SBS polymer can be an efficient and cost-effective strategy to improving bitumen qualities.

Performance prediction analyses of styrene-butadiene rubber and crumb rubber materials in asphalt road applications

Evaluation of Crumb Rubber Modification and Short-Term Aging on the Rutting Performance of Bioasphalt

Effect of Crumb Rubber Size on the Performance of Rubberized Asphalt with Bio-Oil Pretreatment

Investigation of the Effects of Nano-Al2o3 Addition on Compatibility, Rutting and Fatigue Properties of Styrene-Butadiene-rubber Modified Asphalt

Reconstruction of Asphalt Pavements with Crumb Rubber Modified Asphalt Mixture in Cold Region: Material Characterization, Construction, and Performance

Experimental Investigation of the Fracture Properties for Crumb Rubber Modified (CRM) Asphalt Mixtures

Use of Waste Rubber Material as Crumb on Road Construction

Laboratory and Full-Scale Testbed Study in the Feasibility of Styrene-Butadiene-Styrene Asphalt Pavement Having Epoxy Resin and Crumb Rubber Powder

Engineering properties of SBS and crumb-rubber modified bitumen – a design of experiment approach

Investigation of cracking mechanisms in rubber-modified asphalt through fracture testing of mastic specimens

Multilevel Analysis of the Aging Mechanisms and Performance Evolution of Rubber-Modified Asphalt

Laboratory and Field Investigation of the Feasibility of Crumb Rubber Waste Application to Improve the Flexibility of Anti-Rutting Performance of Asphalt Pavement

Rheology and performance evaluation of Polyoctenamer as Asphalt Rubber modifier in Hot Mix Asphalt

Effect of crumb rubber gradation on asphalt binder modification: rheological evaluation, optimization and selection

Study on the Properties of Waste Oil-Activated Crumb Rubber-Modified Asphalt Based on Molecular Dynamics Simulation and Rheology

Evaluation of the compatibility between rubber and asphalt based on molecular dynamics simulation

Improving Asphalt Binder Durability Using Sustainable Materials: A Rheological and Chemical Analysis of Polymer-, Rubber-, and Epoxy-Modified Asphalt Binders

Evaluating and optimizing NBR-modified bituminous mixes: a rheological and RSM-based study

Aging and Rheological Properties of Latex and Crumb Rubber Modified Bitumen Using Dynamic Shear Rheometer

Performance Characterization of Recycled-Asphalt Pavement with Stabilized Rubber–Modified Asphalt Using Balanced Mix Design Method

Rubber and Rubber–Polymer Modifiers of Asphalt–Concrete Mixes Prepared by High-Temperature Shear-Induced Grinding. Part 3. Evaluation of Effectiveness of Modification