Abstract:The adhesion and damage behaviour of wheel–rail systems play an important role in the safety of railway operations. To verify the low adhesion behaviour of wheel and rail contact during the train entering tunnels in alpine regions caused by intermittent humid and warm airflow, tribology testing using a rolling–sliding contact in the laboratory was conducted to investigate the effect of humid and warm airflow with various ambient temperatures (− 55 to 60 °C) and airflow with different humidities (relative humidity from 5 to 99%) on the instantaneous low adhesion and damage failure between the wheel–rail interface. Results indicate that the instantaneous low adhesion phenomenon and multifarious damage are affected by the humidity of the airflow and the ambient temperature. In the temperature range of − 55 to − 20 °C, the wheel–rail interface will be in a low adhesion state once it encounters a humid and warm airflow attack. As a result, the adhesion coefficient curve exhibits a 'comb-shaped' feature. In this temperature range, the wear surface is rougher under the action of high moisture flow, and the main damage mechanism is fatigue wear. In particular, the moisture in the airflow will liquefy into water or even condense directly into frost and ice film on the wheel when the humid and warm airflow encounters the cold wheel surface. Consequently, the adhesion coefficient exhibits a 'comb-shaped' feature. In the meantime, the tribological oxidation reaction is more active at humid airflow conditions of 40–60 °C. The high humidity environment is conducive to the formation of water paste during friction, that is, a mixture of oxidized debris and water molecules that acts as friction-reducing layers, which also reduces the adhesion coefficient. These results will help deeply understand that, the wheel–rail adhesion coefficient drops sharply in an instant once the wheel–rail interface encounters the humid and warm airflow in the tunnel. Thus, railway operations department have to be very cognizant of the low adhesion problem, and take effective measures to improve the adhesion of wheel-rail interface to avoid the occurrence this kind of problem.

Study of rolling-sliding contact damage and tribo-chemical behaviour of wheel-rail materials at low temperatures

Role of ambient temperature in the adhesion and damage characteristics of wheel/rail interface during rolling-sliding contact

On the Wear and Damage Characteristics of Rail Material under Low Temperature Environment Condition

Experimental study of the effects of temperature and humidity on the wear and damage behavior of U71Mn rail steel

Influence of Low Temperature Environment on the Adhesion Characteristics of Wheel-Rail Contact

Study on temperature field and surface damage characteristics of railway brake disc/pad at low temperatures

Adhesion and Damage Behaviour of Wheel–Rail Rolling–Sliding Contact Suffering Intermittent Airflow with Different Humidities and Ambient Temperatures

Experimental Investigation on the Wear and Damage Behaviors of Machined Wheel-Rail Materials under Dry Sliding Conditions

Effects of cold deformation on the low speed sliding wear of the RS/PM Al–10 wt.% Ti alloy against carbon steel

Thermal–Mechanical Coupling Analysis of Wheel–Rail Sliding Friction under Two-Point Contact Conditions

Effect of Cold Deformation on Low Speed Sliding Wear of Al-10Ti Alloy

Effects of Lubricating Conditions on Wear Performance of U77MnCrH Rail

Wear and damage transitions of two kinds of wheel materials in the rolling-sliding contact

A finite element thermomechanical analysis of the development of wheel polygonal wear

Study of wear performance of wheel and rail steels under dry sliding conditions

Comparison of the damage and microstructure evolution of eutectoid and hypereutectoid rail steels under a rolling-sliding contact

Investigation on wear and rolling contact fatigue of wheel-rail materials under various wheel/rail hardness ratio and creepage conditions

Evolution of microscopic characteristics of rolling contact fatigue coexisting with wear of U75V rail

Study on wear and rolling contact fatigue behaviours of defective rail under different slip ratio and contact stress conditions

Influence of material properties on the high-speed wheel-rail rolling contact behaviour

The Influence of Wheel Flats Formed from Different Braking Conditions on Rolling Contact Fatigue of Railway Wheel