Abstract:Due to the complex multiscale interaction between intense turbulence and relatively weak flames, turbulent premixed flames in the thin and broken reaction zones regimes exhibit strong finite-rate chemistry and strain effects and are hence challenging to model. In this work, a laboratory premixed jet flame in the broken reaction zone, which has recently been studied using direct numerical simulation (DNS), is modeled using a large eddy simulation (LES)/dynamic thickened flame (DTF) approach with detailed chemistry. The presence of substantial flame thickening due to strong turbulence-chemistry interactions, which can be characterized by a high Karlovitz number (Ka), requires the DTF model to thicken the flame in an adaptive way based on the local resolution of flame scales. Here, an appropriate flame sensor and strain-sensitive flame thickness are used to automatically determine the thickening location and thickening factor, respectively. To account for finite-rate chemistry and strain effects, the chemistry is described in two different ways: (1) detailed chemistry denoted as full transport and chemistry (FTC), and (2) tabulated chemistry based on a strained premixed flamelet (SPF) model. The performance of the augmented LES/DTF approach for modeling the high Ka premixed flame is assessed through detailed a posteriori comparisons with DNS of the same flame. It is found that the LES/DTF/FTC model is capable of reproducing most features of the high Ka turbulent premixed flame including accurate CO and NO prediction. The LES/DTF/SPF model has the potential to capture the impact of strong turbulence on the flame structure and provides reasonable prediction of pollutant emissions at a reasonable computational cost. In order to identify the impact of aerodynamic strain, the turbulent flame structure is analyzed and compared with unstrained and strained premixed flamelet solutions. The results indicate that detailed strain effects should be considered when using tabulated methods to model high Ka premixed flames.

Modeling of Axisymmetric Jet Flow and Combustion of Propane in Free Space Based on a Modified Turbulence Model $\boldsymbol{k}-\mathcal{E}$

A Priori Analysis Of A Power-Law Mixing Model For Transported Pdf Model Based On High Karlovitz Turbulent Premixed Dns Flames

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Spray flames in an air-heptane swirling combustor

Simulation of Turbulent Combustion in DLR Scramjet

Reynolds-average Navier-Stokes turbulence models assessment: A case study of CH4/H2/N2-air reacting jet

Flame Geometry Of Downward Buoyant Turbulent Jet Fires Under Cross Flows: Experiments, Dimensional Analysis And An Integral Model

A two-dimensional boundary layer model for combustion chamber simulation

Experimental study, dimensional analysis and an integral model for horizontal buoyant turbulent jet fires under opposing wind

Numerical investigation of high-pressure combustion in rocket engines using Flamelet/Progress-variable models

PDF Modelling of Spray Autoignition in High Pressure Turbulent Flows

An elementary model for an advancing autoignition front in laminar reactive co-flow jets injected into supercritical water

Numerical Simulation of Gas-Particle Phase Free Jet Flow Combustion

Numerical Simulation of Propane Turbulent Combustion in a Swirl Combustor

THREE-DIMENSIONAL NUMERICAL SIMULATION ON SPRAY COMBUSTION IN A LOX-HYDROGEN ENGINE

A RANS/EDC Simulation of the Lifted Turbulent Non-Premixed Round Jet of CH4 Flame

Numerical Modelling of Combustion Process with the Use of ANSYS FLUENT Code

Simulation of Swirling Turbulent Flow and Combustion in A Combustor

Pseudo-Two-Dimensional Modeling and Validation of a Hybrid Rocket Combustion Chamber