Abstract:Background: The entry of the concept of nanotechnologies into the field of biomaterials has improved the results of their use in regenerative therapies based on the principles of tissue engineering, due to its improvement of the physical properties of materials manufactured in this way, so it has become possible to produce particles of hydroxyapatite in nano sizes. Aim of the study: This study will evaluate the efficacy of applying nanohydroxyapatite paste and platelet-rich fibrin (PRF) as a barrier membrane in comparison with traditional hydroxyapatite (a powder consisting of macro-sized particles) and PRF as a barrier membrane in symmetrically extracted alveoli of the mandible. Materials and methods: The research sample consisted of 40 lower alveoli (symmetrical) of the extracted teeth. The study samples were divided randomly into two groups. Group 1: A paste of nanohydroxyapatite with PRF as a barrier membrane was applied to one side of the extraction. Group 2: Hydroxyapatite powder with PRF as a barrier membrane was applied to the alveolus from the opposite side of Group 1 (the opposite side of the extraction). Three radiographs were performed by cone beam conventional tomography (CBCT) in three consecutive periods to conduct the radiological study (T0: immediately after extraction and grafting, T1: after three months, T2: after six months). Results: The mean of the radiographic bone density of the hydroxyapatite powder group at time T0 is 824.36 HU with a standard deviation of ±277.29 HU, and at time T1 is 1119.93 HU with a standard deviation of ±306.93 HU, and at time T2 is 1074.14 HU with a standard deviation of ±223.62 HU, with statistically significant differences when comparing the amount of change in radiographic bone density at time T0 and T1 with P < 0.05, and at time T0 and T2 with P < 0.05, but there were no significant differences when comparing the amount of change in radiographic bone density in T1 and T2 times with P > 0.05. The mean radiographic bone density of the nanohydroxyapatite paste group at time T0 is 629.88 HU with a standard deviation of ±193.64 HU, and at time T1 is 960.67 HU with a standard deviation of ±256.88 HU, and at time T2 is 743.87 HU with a standard deviation of ±180.96 HU, and in the time T0 and T1 with P < 0.05, and in the time T0 and T2 with P < 0.05, and in the time T1 and T2 with P < 0.05. Statistically, significant differences have been found between bone density change T1, T2 in the nanohydroxyapatite paste group and bone density change T1, T2 in the hydroxyapatite powder group P<0.05, which expresses a greater loss of density in the nanohydroxyapatite group, and thus the resorption of the bone graft and the placement of new bone tissue. Conclusion: Within the limits of our study, the results demonstrated that the use of traditional hydroxyapatite powder and nanohydroxyapatite paste increases the radiographic bone density, nanohydroxyapatite paste has a greater absorbency after 3 months compared with traditional hydroxyapatite powder which helps replace it by natural bone tissue.

Thermal management of carbon-based dental laminate via additives carbon nanotube and hydroxyapatite in a vessel micro-flow based on the numerical/empirical data

Effect of carbon nanotubes on the thermal conductivity enhancement of synthesized hydroxyapatite filled with water for dental applications: experimental characterization and numerical study

Dense alumina-based carbonated fluorapatite nanobiocomposites for dental applications

Effect of Heat Treatment of Nano-Hydroxyapatite Coatings Prepared Using Electrohydrodynamic Deposition

Effect of Surface Chemistry on Hemolysis, Thrombogenicity, and Toxicity of Carbon Nanotube Doped Thermally Sprayed Hydroxyapatite Implants

Carbon Nanotube Reinforced Hydroxyapatite Nanocomposites As Bone Implants: Nanostructure, Mechanical Strength and Biocompatibility

The effect of alumina additive and sintering temperature on the microstructural, physical, mechanical, and bioactivity properties of hydroxyapatite–alumina composites

Combination of in silico and cell culture strategies to predict biomaterial performance: Effects of sintering temperature on the biological properties of hydroxyapatite

Radiological Comparative Study Between Conventional and Nano Hydroxyapatite With Platelet-Rich Fibrin (PRF) Membranes for Their Effects on Alveolar Bone Density

Heat Conduction Enhancement of a Thermal Interface Material for Heat Sink Applications Using Carbon Nanomaterials

A New Method for Characterization of Thermal Properties of Human Enamel and Dentine: Influence of Microstructure

Bioactive hybrid membrane-based cellulose acetate/bioactive glass/hydroxyapatite/carbon nanotubes nanocomposite for dental applications

In Vitro Biological Performance of Nano-Particles on the Surface of Hydroxyapatite Coatings

The Effect of Heat-Treatment and Bioresorbability of Silicate-Containing Hydroxyapatite

In Vitro Investigation of Heat Transfer in Human Tooth

Effect of Mixing Bioactive Nanoceramics with a Thermosensitive Hydrogel As Bone Substitute

Role of Ti3AlC2 MAX phase in regulating biodegradation and improving electrical properties of calcium silicate ceramic for bone repair applications

Effect of titanium dioxide and zirconium dioxide nanoparticle incorporation on the thermal conductivity of heat-activated polymethylmethacrylate denture base resins: An in vitro experimental study

Tribological behavior study on Ti-Nb-Sn/hydroxyapatite composites in simulated body fluid solution.

Effects of the sintering process on the different properties of alumina/hydroxyapatite nanobiocomposites

Greater osteoblast and mesenchymal stem cell adhesion and proliferation on titanium with hydrothermally treated nanocrystalline hydroxyapatite/magnetically treated carbon nanotubes