Abstract:Activated carbon, from biomass (pinecone), was synthesized by conventional pyrolysis/chemical activation process and utilized for the fabrication of supercapacitor electrodes. The pinecone‐activated carbon synthesized with 1:4 ratio of KOH (PAC4) showed an increase in surface area and pore density with a considerable amount of oxygen functionalities on the surface. Moreover, PAC4, as supercapacitor electrode, exhibited excellent electrochemical performances with specific capacitance value ∼185 Fg−1 in 1 M H2SO4, which is higher than that of nonactivated pinecone carbon and 1:2 ratio KOH‐based activated carbon (PAC2) (∼144 Fg−1). The systematic studies were performed to design various forms of devices (symmetric and asymmetric) to investigate the effect of device architecture and operating voltage on the performance and stability of the supercapacitors. The symmetric supercapacitor, designed utilizing PAC4 in H2SO4 electrolyte, exhibited a maximum device‐specific capacitance of 43 Fg−1 with comparable specific energy/power and excellent stability (∼96% after 10 000 cycles). Moreover, a symmetric supercapacitor was specially designed using PAC4, as a positive electrode, and PAC2, as a negative electrode, under their electrolytic ion affinity, and which operates in aqueous Na2SO4 electrolyte for a wide cell voltage (1.8 V) and showed excellent supercapacitance performances. Also, a device was assembled with poly(3,4‐ethylene dioxythiophene) (PEDOT) nanostructure, as positive electrode, and PAC4, as a negative electrode, to evaluate the feasibility of designing a hybrid supercapacitor, using polymeric nanostructure, as an electrode material along with biomass‐activated carbon electrode.

Renewable pine cone biomass derived carbon materials for supercapacitor application

Green Synthesis of Fe-Decorated Carbon Sphere/Nanosheet Derived from Bamboo for High-Performance Supercapacitor Application

High-surface-area activated carbon from pine cones for semi-industrial spray deposition of supercapacitor electrodes

Pinecone biomass‐derived activated carbon: the potential electrode material for the development of symmetric and asymmetric supercapacitors

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

High Performance Supercapacitors Electrode Derived from the Pine Needles

Porous carbon derived from cashew nut husk biomass waste for high-performance supercapacitors

Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Conversion of high moisture biomass to hierarchical porous carbon via molten base carbonisation and activation for electrochemical double layer capacitor

Status of Biomass Derived Carbon Materials for Supercapacitor Application

Porous Carbon derived from Pine Nut Shell prepared by Steam Activation for Supercapacitor Electrode Material

Recent Development of Biomass-Derived Carbons and Composites As Electrode Materials for Supercapacitors

Green synthesis of porous carbon for supercapacitors from pine cone/phoenix tree fruit fluff by hydrothermal pre-activation method

Peanut shell waste derived porous carbon for high-performance supercapacitors

Pine Needle-Derived Microporous Nitrogen-Doped Carbon Frameworks Exhibit High Performances in Electrocatalytic Hydrogen Evolution Reaction and Supercapacitors.

Functional Biomass Carbons with Hierarchical Porous Structure for Supercapacitor Electrode Materials

Sodium Lignosulfonate-Derived Hierarchical Porous Carbon Electrode Materials for Supercapacitor Applications

Facile Synthesis of Nitrogen Self-Doped Hierarchical Porous Carbon Derived from Pine Pollen Via MgCO3 Activation for High-Performance Supercapacitors

Porous Hard Carbon as High-Performance Electrode Material for Supercapacitors: Towards Sustainable Approach

Synthesis of biomass-derived N,O-codoped hierarchical porous carbon with large surface area for high-performance supercapacitor