Abstract:In the present work, the hydrodynamics behavior of a 3D small-scale cold flow modeling of a gas-solid tapered fluidized bed is evaluated with the Eulerian-Eulerian two-fluid modeling (TFM) approach. The sensitivity of different modeling parameters, including lift and virtual mass forces, viscous force, gas-solid drag force, granular temperature, granular viscosity, granular pressure, particle-wall specularity coefficient, particle-particle restitution coefficient, and particle-wall restitution coefficient, are systematically investigated to optimize the performance of the present numerical model. The results from different sensitivity analyses reveal that the gas-particle drag force is a more important force to resolve the correct time-averaged axial and radial solids holdup profiles of the tapered fluidized bed than the other investigated parameters. The highest accuracy possible from simulations is achieved from the Gibilaro drag model followed by the Arastoopour and EMMS/bubbling models. In contrast, all other drag models over-predict the gas-particle interaction force. The assessment of the lift and virtual mass forces, viscous force, granular temperature, granular viscosity, granular pressure, and particle-wall restitution coefficient results reveal that these parameters are less critical for the numerical simulations of the tapered fluidized bed than the gas-solid drag force. However, the assessment of particle-wall specularity coefficient and particle-particle restitution coefficient reveals that adjusting these parameters in the numerical simulations is helpful to achieve a better agreement between the experimental data and model results. For the higher gas flow rate, the current work shows that a better agreement can be achieved by tuning the parameter values in the standard sub-models than the previously published TFM studies. Meanwhile, for the lower gas flow rate, the accuracy of the present work is slightly lower than the previously published work but acceptable with the experimental measurements. The current work has an advantage over the previously published work in terms of lower computational effort by using the simplified geometry and mean particle diameter assumptions.

Simulation of 3D gas–solid fluidized bed reactor hydrodynamics

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Experiment and multiphase CFD simulation of gas-solid flow in a CFB reactor at various operating conditions: Assessing the performance of 2D and 3D simulations

CFD Simulations of Gas–liquid–solid Flow in Fluidized Bed Reactors — A Review

FLOW MODELING OF A FLUIDIZED BED REACTOR USING COMPUTATIONAL FLUID DYNAMICS

Numerical Simulation of Gas-particle Hydrodynamics in CFB

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

CFD Simulation of Gas and Solid Flow Behavior in a Riser

Validation and Sensitivity Analysis of an Eulerian-Eulerian Two-Fluid Model (TFM) for 3D Simulations of a Tapered Fluidized Bed

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

A computational fluid dynamics study on the flow field in a liquid–solid circulating fluidized bed riser

The Application of CFD Methods for Modeling of a Three-Phase Fixed-Bed Reactor

Numerical Simulation of the Gas−Solid Flow in Fluidized-Bed Polymerization Reactors