Abstract:Background. Obtaining sorption materials based on natural raw materials for water purification from pollution by heavy metal ions is an urgent task of our time. Composites with zero-valent iron nanoparticles immobilized on the surface of clay minerals show rather high sorption properties concerning ions of some heavy metals. However, there are only a few proceedings devoted to the physicochemical substantiation of wastewater treatment processes containing a complex mixture of such pollutants. Objective. The purpose of the paper is to study the physicochemical regularities of wastewater treatment from a mixture of ions of heavy metals Cu(II), Cd(II), Co(II), Zn(II), Cr(VI) using stabilized nano dispersed powders of zero-valent iron. Methods. The phase composition and structural-sorption characteristics of palygorskite and composites were studied by X-ray phase analysis and low-temperature adsorption-desorption of nitrogen. The efficiency of removal of metal ions by silicate materials was investigated using the sorption method. The equilibrium concentrations of each of the metals were determined by inductively coupled plasma atomic emission spectrometry. Results. We have investigated the physicochemical features of wastewater treatment containing a complex mixture of heavy metal ions (Cu(II), Cd(II), Zn(II), Co(II), Cr(VI)). The phase composition and structural-sorption properties of stabilized nano dispersed powders of zero-valent iron have been studied. It has been experimentally confirmed that the materials obtained have significantly better sorption properties for the removal of heavy metals from aqueous solutions in comparison with natural palygorskite. Using Freundlich and Langmuir equations sorption isotherms were calculated. Conclusions. It has been established that stabilized nano dispersed powders of zero-valent iron can be successfully used for the purification of wastewater containing a mixture of toxic ions Cu(II), Cd(II), Co(II), Zn(II) and Cr(VI). It is shown that the degree of water purification by the obtained sorbents is 3–5 times higher than that for the unmodified mineral. A significant increase in the values of sorption of anionic forms of Cr(VI), which are difficult to remove from polluted waters by natural ion exchangers, has been determined.

Efficient removal of arsenic(V) from water using iron-containing nanocomposites based on kaolinite

Development of iron-containing sorption materials for water purification from arsenic compounds

Arsenic removal from aqueous solutions by adsorption onto iron oxide/activated carbon magnetic composite

REMOVAL OF Cu(II), Cd(II), Co(II), Zn(II), Cr(VI) FROM WASTEWATER BY STABILIZED NANOSCALE ZERO-VALENT IRON

Synthesis and characterization of kaolinite-based granular adsorbents for the removal of Cu(II), Cd(II), Co(II), Zn(II), and Cr(VI) from contaminated water

Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite

Enhanced As (V) Removal from Aqueous Solution by Biochar Prepared from Iron-Impregnated Corn Straw

Removal and Oxidation of As(III) from Water Using Iron Oxide Coated CTAB as Adsorbent

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

Efficient arsenic(V) removal from contaminated water using natural clay and clay composite adsorbents

Treatment of arsenic-contaminated groundwater with a novel iron oxide/carbon composite as the adsorbent

Efficient arsenic(V) removal from water by ligand exchange fibrous adsorbent

Arsenic removal from water by nanometer iron oxide coated single-wall carbon nanotubes

Adsorption Performance of Fe(III) Modified Kapok Fiber for As(V) Removal from Water

Green synthesis and evaluation of an iron-based metal-organic framework MIL-88B for efficient decontamination of arsenate from water

A Novel Nanostructured Fe-Ti-Mn Composite Oxide for Highly Efficient Arsenic Removal: Preparation and Performance Evaluation

Efficient arsenic removal from water using iron-impregnated low-temperature biochar derived from henequen fibers: performance, mechanism, and LCA analysis

Adsorption of organic and inorganic arsenic from aqueous solution: Optimization, characterization and performance of Fe–Mn–Zr ternary magnetic sorbent

Removal Technology and Mechanism of Arsenic From Wastewater by Zeolite Imidazole Framework-8@Carbon Nanodots

Development, Characterization and Evaluation of Iron-Coated Honeycomb Briquette Cinders for the Removal of As(V) from Aqueous Solutions

Adsorption of Arsenate from Groundwater Through a Fixed Bed Using Iron-Coated Natural Fibres: Reusability and Sorbent Characterisation