Abstract:Banana (Musa sapientum) is a predominant fruit crop grown in Sri Lanka which occupies nearly 60,000 ha of land, accounting for 54% of the total fruit cultivation land utilization in the country. The banana tree has a ten months cycle to bear fruits and after its harvesting, the stems are thrown away and left to decay and rot. The waste produced by a single banana plant can make up to 80% of the total plant mass and it is estimated that 220 tons of post-harvest biomass wastes are produced per hectare annually. This has led to waste disposal problems and serious environmental issues. Management of such a vast amount of agricultural waste promotes the use of this biomass for value addition processes. In this research work, an organosolv process based on a mixture of formic acid, acetic acid, and water was adapted and optimized to pulp banana pseudostem fiber and investigate its potential, as a raw material for pulp and paper production through chemical, morphological and mechanical characterization. The global consumption of paper totals more than 400 million tons, cutting down about 7.2 billion trees each year to meet its demand for printing, packaging, and writing purposes. Therefore, the initiative in utilizing available banana waste as an alternative raw material for paper production could further offer a great potential in reducing the dependence on natural timbers, which in turn reduces the demand for global deforestation in the long run. Banana pseudostem fiber is characterized by a high cellulose content and a low lignin content, which is desirable for better pulp yield and papermaking properties. However, it has a high ash content and its interference in the recovery of black liquor was overcome with the selected pulping method. It resulted in a high pulp yield (48.2%) with a kappa number of 32.4. A shorter fiber length (1.12 mm) contributed to a highly uniform paper structure with a smooth surface. Furthermore, the pulp fibers showed an increased crystallinity and a higher slenderness ratio, which is favorable for paper making. The papers produced were heavier weight boards with a grammage of 272 g/m2 and showed higher tensile index (43.16 Nm/g) and tear index (2.08 mNm2/g) compared to other published non-wood fibers. Keywords: Banana pseudostem, Organosolv, Cellulose, Pulp, Lignin

Pulping Process and the Potential of Using Non-Wood Pineapple Leaves Fiber for Pulp and Paper Production: A Review

Process optimization and material characterization of fiberboards produced from pineapple leaf waste

Recent Updates on the Conversion of Pineapple Waste (Ananas comosus) to Value-Added Products, Future Perspectives and Challenges

Utilization of Waste Banana Pseudostem for Paper Production via Organosolv Pulping

Chemical and Fibre Properties by Lemon Grass in Chemical Pulping for Pulp Industry

Sustainable utilization of pineapple fruit waste as a potential source of regenerated cellulose for the development of high-strength paper

Pineapple processing waste (PPW): bioactive compounds, their extraction, and utilisation: a review

Enzimatic Processing of Lignocellulosic Biomass for Pulp Making: A Review

Microbial biotechnology approaches for conversion of pineapple waste in to emerging source of healthy food for sustainable environment

Using biomass residues from oil palm industry as a raw material for pulp and paper industry: potential benefits and threat to the environment

NON-WOODEN RAW AS A SOURCE OF CELLULOSE FIBERS. USE PROSPECTS, PROBLEMS AND SOLUTIONS (REVIEW)

Alternative initiatives for non‐wood chemical pulping and integration with the biorefinery concept: A review

Utilization of Pandan Leaf Fibers (Pandanus simplex merr.) for the Production of Paper

Utilization of Coconut Fronds as Raw Material for Making Art Paper

Unraveling the Valorization Potential of Pineapple Waste to Obtain Value-Added Products towards a Sustainable Circular Bioeconomy

Utilization of Waste Cellulose Raw Material for Making Paper Pulp

Pulp and paper production from oil palm empty fruit bunches: A current direction in Malaysia

Agricultural Residues as Raw Materials for Pulp and Paper Production: Overview and Applications on Membrane Fabrication

Nutritional Composition and Therapeutic Potential of Pineapple Peel ‐ A Comprehensive Review

Cellulose and lignin purified from Metroxylon sagu palm fronds by a new technology with 2-methylanthraquinone cooking and peroxymonosulfuric acid bleaching

Novel recycling of pineapple leaves into cellulose microfibers by two-step grinding of ball milling and high-speed rotor–stator homogenization