Abstract:Presently, the construction industry demands components that are exceptionally strong and long-lasting. The initial important construction material is concrete, which contains between 1 % and 2 % of air voids. The structural damage caused by water that enters through the air spaces are improved with filler material. Chemical filler materials are environmentally harmful; therefore, eco-friendly materials are selected for this study. The environmentally benign character of agro-waste byproduct usage is a driving factor in the field of research. Numerous uses can be found for waste materials, especially after they have been repurposed. We used a byproduct of an essential oil extraction company, an extract made from the leaves of lemon grass (Cymbopogan citrus), in our research. Alkalization, slow pyrolysis, acid hydrolysis, and bleaching are only some of the chemical treatments that could be used to easily extract microcrystalline cellulose from the discarded waste material. In our study the chemicals used are mild harmful to the environment and a surface reactant (linear alkyl benzene sulfonic acid) is utilised to bleach and purify the microcrystalline cellulose. Thermal analysis, scanning electron microscopy, transmission electron microscopy and Fourier transform spectroscopy were all used to learn more about the cellulose that had been extracted. The extracted cellulose powder comprises a high crystallinity index (68.14 %) and low crystallite size (5.13 nm) found using X-ray diffraction analysis. The smooth and porous surface is observable in scanning electron microscope analysis. The Differential scanning calorimeter curve shows the highest degradation temperature at 218.16 °C. The micro sized particles mostly range between 100 and 120 μm and are found using ImageJ. The surface roughness and permissible skewness of cellulose particles were examined using atomic force microscopy. The density of extracted cellulose is 1.092 g/cm3. The microcrystalline cellulose yield % was notably maximum (40.45 %). This cellulose was introduced in a M30 grade cement concrete as fillers up to 5 % by the weight of cement. The fresh and mechanical properties of the concrete was found to get improved with the addition of cellulose up to 3 %. As a result, the characteristics of cellulose boost its utility within the construction sector.

Chemical and Fibre Properties by Lemon Grass in Chemical Pulping for Pulp Industry

Pulping Process and the Potential of Using Non-Wood Pineapple Leaves Fiber for Pulp and Paper Production: A Review

Cellulose and lignin purified from Metroxylon sagu palm fronds by a new technology with 2-methylanthraquinone cooking and peroxymonosulfuric acid bleaching

Pulp and paper production from oil palm empty fruit bunches: A current direction in Malaysia

Utilization of Pandan Leaf Fibers (Pandanus simplex merr.) for the Production of Paper

Using biomass residues from oil palm industry as a raw material for pulp and paper industry: potential benefits and threat to the environment

Utilization of Coconut Fronds as Raw Material for Making Art Paper

Sugar Palm Fibre-Reinforced Polymer Composites: Influence of Chemical Treatments on Its Mechanical Properties

Utilization of Waste Cellulose Raw Material for Making Paper Pulp

Physical and Chemical Properties of Acacia mangium Lignin Isolated from Pulp Mill Byproduct for Potential Application in Wood Composites

Structure analysis of three non-wood materials for liner paper

Characteristics and Properties of Lemongrass (Cymbopogan Citratus): A Comprehensive Review

Utilization of Waste Banana Pseudostem for Paper Production via Organosolv Pulping

Comprehensive characterization of microcrystalline cellulose from lemon grass (Cymbopogan citratus) oil extraction agro-industrial waste for cementitious composites applications

Non-wood fibers as raw material for pulp and paper industry

Development and characterisation of gelatine/palm wax/lemongrass essential oil (GPL)‐coated paper for active food packaging

CHARACTERIZATION OF UNBLEACHED PULP FROM EMPTY FRUIT BUNCHES OF OIL PALM AS A RAW MATERIAL FOR BROWN PAPER

Insights into chemistry, extraction and industrial application of lemon grass essential oil -A review of recent advances

Extraction, physicochemical and structural characterisation of palm grass leaf fibres for sustainable and cleaner production of textile and allied cellulosic applications

Highly Porous Carbon Materials from Biomass by Chemical and Carbonization Method: A Comparison Study

Process optimization and material characterization of fiberboards produced from pineapple leaf waste