Abstract:Li-alloy based anode materials are very promising for breaking current energy limits of lithium-ion battery technologies. At present, their practical applications are mainly hindered by the solid-electrolyte interphase (SEI) stability issue. SEIs of Li-alloy anode materials exhibit insufficient surface passivation to prevent electrolyte penetration and suffer from cracking and peeling-off issues due to their poor tolerance to volume changes, consuming additional electrolyte and material for SEI repair. Here we propose a chemical SEI reinforcement strategy via introducing multiple functional components as SEI components, which have strong interactions with Li-alloy material surface and effectively improve the SEI stability, including its tolerance to volume changes and surface passivation during cycling. Using a modular synthetic approach, we realized a one-step fabrication of diverse components with designed structure and anchoring amount, allowing the facile construction and optimization of the SEI. Si nanoparticle (SiNP) materials were used as the platform for demonstrating this concept. After screening and optimizing the SEI structure using various pre-anchored components, one chemically reinforced SEI (CR-SEI), reinforced by a combination of two functional components with moderate anchoring amount shows significantly improved stability compared to the SEI derived from electrolyte with FEC additives. During cycling, the CR-SEI presents unique and stable chemical composition, resulted form the addtion of pre-designed functional components, which differs from the composition of conventioal SEI. Meanwhile, the CR-SEI also maintains good and durable morphology during cycling. After many cycles, only very limited “SEI accumulation” was observed in the TEM images of SiNP with CR-SEI and the CR-SEI remains thin and uniform. This is in contrast with the poor stability of conventional SEI. Large amount of SEI accumulation and SiNPs decrease in size were observed. Finally, owing to the improved SEI stability, SiNP electrode with CR-SEI presents significantly increased electrochemical performance, including increased 1st cycle Coulombic efficiency (CE), improved cycling CE and capacity retention, and limited increase in electrochemical impedance. Particularly, the SiNP electrode with CR-SEI present much better cycle life in the full-cell system than one containing electrolyte additive improved SEI. Moreover, this strategy has also been applied to GeNP SEI reinforcement with dramatic enhancement of the SEI stability, suggesting its viability for other Li-alloy materials. Owing to the facility and modularity of the synthetic approach, we are also able to further examine more functional components potentially suitable for SEI reinforcement.

Anti-corrosive and surface-stabilizing functional electrolyte containing LiFSI and LiPO2F2 for SiO /NCM811-based batteries

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Bicomponent Electrolyte Additive Excelling Fluoroethylene Carbonate for High Performance Si-based Anodes and Lithiated Si-S Batteries

S-containing and Si-containing compounds as highly effective electrolyte additives for SiOx -based anodes/NCM 811 cathodes in lithium ion cells

Fluorinated Solvent‐Coupled Anion‐Derived Interphase to Stabilize Silicon Microparticle Anodes for High‐Energy‐Density Batteries

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Perfluoro Macrocyclic Ether as an Ambifunctional Additive for High‐Performance SiO and Nickel 88%‐Based High‐Energy Li‐ion Battery

Topological Considerations in Electrolyte Additives for Passivating Silicon Anodes with Hybrid Solid–Electrolyte Interphases

Reversible Silicon Anodes Enabled by Fluorinated Inorganic-Organic Hybrid Coating

A Novel Multifunctional Additive Strategy Improves the Cycling Stability and Thermal Stability of SiO/C Anode Li-ion Batteries

Enhancing the interfacial stability of high‐energy Si/graphite||LiNi0.88Co0.09Mn0.03O2 batteries employing a dual‐anion ionic liquid‐based electrolyte

Electrolyte Design Enabling a High‐Safety and High‐Performance Si Anode with a Tailored Electrode–Electrolyte Interphase

Novel Composite Electrolyte Additive for Enhancing the Thermal and Cycling Stability of SiO/C Anode Li-ion Battery

Solid-Electrolyte Interphase Reinforcement Strategy Through Introducing Covalently Anchored Multi-Functional Components for Li-Alloy Anodes

Elastic Interfacial Layer Enabled the High‐Temperature Performance of Lithium‐Ion Batteries via Utilization of Synthetic Fluorosulfate Additive

Enabling the use of lithium bis(trifluoromethanesulfonyl)imide as electrolyte salt for Li‐ion batteries based on silicon anodes and Li(Ni0.4Co0.4Mn0.2)O2 cathodes by salt additives

Building stable solid electrolyte interphases (SEI) for microsized silicon anode and 5V-class cathode with salt engineered nonflammable phosphate-based lithium-ion battery electrolyte

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Electrolytes Containing Triethyl Phosphate Solubilized Lithium Nitrate for Improved Silicon Anode Performance

Interface Engineering Enables Wide-Temperature Li-Ion Storage in Commercial Silicon-Based Anodes

Enhancing Li cycling coulombic efficiency while mitigating "shuttle effect" of Li−S battery through sustained release of LiNO 3