Abstract:Metals and metal oxides have subpar antibacterial activities compared to those of small-molecule antibiotics, yet there are hopes that with proper compositional and structural adjustments this gap might be bridged. In this study, titanium dioxide (TiO 2 ) nanoparticles were mechanically activated and combined with particulate silver through simple reduction process elicited by UV irradiation and assisted with the ultrasound. The resulting powders in various combinations (Ag vs . no Ag, activated vs . non-activated) were characterized using a range of experimental techniques and assessed for their antibacterial activities. The preparation procedure presented in this work prevails over the disadvantages of many chemical routes, most critically by avoiding the use of toxic substances. The mechanical activation did not reduce the particle size or crystallinity of TiO 2 nor did it consistently alter the bandgap, yet it enabled the doubling of the amount of silver incorporable into the material. Further, while both mechanical activation and the addition of silver in the amount not exceeding 0.5 wt% produced barely detectable structural changes in the material, they both augmented its antibacterial activity. The precursor TiO 2 powder produced no inhibition zone against any of the four bacterial species tested, while the mechanical activation of TiO 2 led to the formation of distinct inhibition zones against each of the four bacterial species tested. The addition of silver to activated TiO 2 further widened the inhibition zones and it also imparted the antibacterial activity to non-activated TiO 2 . The boost in the antibacterial activity achieved by the short mechanical activation was of a similar magnitude as the boost obtained after the addition of silver. The antibacterial activity was not different for different species when no silver was added to the system. However, with the addition of silver, species selectivity was obtained, as the composites were more effective against the two Gram-negative species ( Escherichia coli and Klebsiella pneumoniae ) than against the two Gram-positive ones ( Staphylococcus aureus and Bacillus subtilis ). The antibacterial activity increased with the addition of silver in the broth assay, but it was mediocre compared to that detected in the agar assay, attesting to the poor dispersability of the powders and their best performance when the bacterial cells migrate to the composite surface than vice versa . The findings of this study give hope that with appropriate microstructural or compositional alterations, the antibacterial activity of metal oxide powders and inorganic materials in general can be made comparable to that of small-molecule antibiotics.

Mechanisms of antibacterial activity and stability of silver nanoparticles grown on magnetron sputtered TiO2 coatings

Production and Characterization of Bioactive and Antimicrobial Titanium Oxide Surfaces with Silver Nanoparticles and a Poly(lactic Acid) Microfiber Coating

The Chemical and Biological Properties of Nanohydroxyapatite Coatings with Antibacterial Nanometals, Obtained in the Electrophoretic Process on the Ti13Zr13Nb Alloy

Influence of Preparation Procedure on Physicochemical and Antibacterial Properties of Titanate Nanotubes Modified with Silver

Influence of Cu, Au and Ag on structural and surface properties of bioactive coatings based on titanium

Modulating antibacterial properties of titanium surface coatings: The role of low intensity pulsed ultrasound and light stimuli

Investigation of magnetron sputtered nano-silver coating on titanium surface with micro-nanostructure

Antibacterial and Antifungal Properties of Silver Nanoparticles—Effect of a Surface-Stabilizing Agent

Biological and antibacterial properties of chitosan-based coatings with AgNPs and CuNPs obtained on oxidized Ti13Zr13Nb titanium alloy

Covalent incorporation of Ag nanoparticles into TiO2 nanotubes on Ti6Al4V by molecular grafting for enhancing antibacterial effect

Fabrication of Antibacterial Metal Surfaces Using Magnetron-Sputtering Method

Mechanical activation and silver supplementation as determinants of the antibacterial activity of titanium dioxide nanoparticles

Electrophoretic deposition of photothermal responsive antibacterial coatings on titanium with controlled release of silver ions

Silver Linings: Electrochemical Characterization of TiO2 Sol-Gel Coating on Ti6Al4V with AgNO3 for Antibacterial Excellence

Characterization and investigation of electrochemical and biological properties of antibacterial silver nanoparticle-deposited TiO2 nanotube array surfaces

Bioinspired Anchoring AgNPs Onto Micro-Nanoporous TiO2 Orthopedic Coatings: Trap-killing of Bacteria, Surface-Regulated Osteoblast Functions and Host Responses.

Gram-scale Synthesis of Splat-Shaped Ag–TiO2 Nanocomposites for Enhanced Antimicrobial Properties

The Optimization of the Synthesis of Antibacterial Coatings on Ti6Al4V Coupons Obtained by Electron Beam Melting

Spray-deposited Ag nanoparticles on micro/nano structured Ti6Al4V surface for enhanced bactericidal property and cytocompatibility

Photocatalytic and antibacterial activities of silver and iron doped titania nanoparticles in solution and polyaspartic coatings

Antibacterial properties of silver nanoparticles grown <i>in situ</i> and anchored to titanium dioxide nanotubes on titanium implant against <i>Staphylococcus aureus</i>