Bentonite-Free Water-Based Drilling Fluid with High-Temperature Tolerance for Protecting Deep Reservoirs

Weian Huang,Binqiang Xie,Zhengsong Qiu,Lin Jiang

DOI: https://doi.org/10.1007/s10553-016-0655-8

2016-01-01

Chemistry and Technology of Fuels and Oils

Abstract:A bentonite-free water-based drilling fluid (BFDF) with high-temperature tolerance (up to 200°C) was developed for protecting reservoirs in deep wells. The fluid is composed of heatresistant polymeric thickener and starch, sodium sulfite, etc. A series of methods including environmental scanning electron microscopy (ESEM), linear expansion and hot-rolling dispersion test, and core-flow experiments and measurements of the rheological parameter, filtrate, and biotoxicity were used to evaluate the performance of the BFDF formulation. Laboratory results indicate that the fluid has excellent high-temperature tolerance. Its yield point and plastic viscosity ratio is up to 0.38 even after aging at 200°C for 16 h with API filtrate of 9.8 mL. Its apparent viscosity, plastic viscosity, and yield point at 180°C are 30 mPa·s, 17 mPa·s, and 14.5 Pa, respectively, which show its good well-cutting carrying performance and wellbore purification capacity. The BFDF formulation exhibits a strong ability to restrain the linear expansion rate of bentonite and shale powder, to improve cutting recovery, to protect the well reservoir by cutting down water blocking and lowering permeability damage, and to minimize biotoxicity with a high EC50 value and is suitable for drilling deep wells in environmentally sensitive areas.

energy & fuels,engineering, chemical, petroleum

What problem does this paper attempt to address?

This paper aims to develop a bentonite - free water - based drilling fluid (BFDF) with high - temperature tolerance (up to 200°C) for reservoir protection in deep wells. Specifically, the paper attempts to solve the following problems:

1. **Reservoir damage problem**: In the petroleum industry, reservoir damage refers to the changes in reservoir rock properties caused by various downhole operations. These changes may be irreversible and will have a serious economic impact on the productivity of the reservoir. The main causes of reservoir damage include the invasion of solid particles and liquids, especially the damage caused by deformable spherical particles is more serious. Therefore, bentonite - free drilling fluids (water - based or oil - based) are used to drill through reservoir rocks because bentonite particles are deformable.

2. **High - temperature tolerance problem**: With the increase of deep - well low - porosity and low - permeability formations, it is necessary to develop drilling fluids with high - temperature tolerance and an optimal combination of viscosity, gel strength and filtration loss. The rheological behavior and filtration loss of bentonite - free drilling fluids can be adjusted by adding polymers. Therefore, it is necessary to develop a polymer thickener and filtration control agent with ultra - high - temperature tolerance.

3. **Environmental protection problem**: The developed drilling fluid also needs to have low biotoxicity when used in environmentally sensitive areas to reduce the impact on the environment.

To achieve the above goals, the author developed a high - temperature - tolerant polymer thickener (HTVS) and evaluated its performance through laboratory tests, including rheological parameters, filtration loss, biotoxicity, etc. The experimental results show that the drilling fluid exhibits excellent performance under high - temperature conditions, can effectively protect deep - well reservoirs, and has low biotoxicity, which is suitable for use in environmentally sensitive areas.