Abstract:Detecting defects in metal structures quickly and robustly is critical to maintaining safe operation in industry. This work discloses an eddy current (EC) testing probe with coils carrying three-phase currents as excitation and integrated array tunnel magnetoresistance (TMR) sensors measuring the magnetic field as receiver. The three-phase currents in the planar layout coils induce EC that migrates electrically in the material under test. This excitation method does not require multiplexing of the coils and is sensitive to defects of any orientations. The TMR array contains 64 sensors, which are microfabricated and packaged in a line. Within single probe pass, the sensors generate magnetic field image with high sensitivity ($text{1.99};text{nT}/sqrt {text{Hz}} @text{30};text{kHz}$) and fine spatial resolution (0.5 mm pitch). By analyzing the output image, defects are identified and localized. The operating principle of the probe was investigated based on a finite-element method model. A prototype probe was developed and tested, with which machined defects in aluminum samples were inspected. Experimental results show that the probe has comparable sensitivity for horizontal and vertical defects, and it can recognize a small defect with length × width × depth = 1 × 0.2 × 1 mm<sup>3</sup>. The defects are located within 1 mm with an artificial neural network.

Experimental validation of an eddy current probe for defect detection in thick conducting specimen

A Novel Self-Compensating GMR-Based Eddy Current Probe for Hidden Crack Detection

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Inspection of defects in conductive multi-layered structures by an eddy current scanning technique: Simulation and experiments

Eddy current testing in thickness measurement of material with multi-layer structure

Magnetic Field-Based Eddy-Current Probe Design, Modeling, and Computing Methods for Edge Defect Detection

An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation

Eddy Current Probe With Three-Phase Excitation and Integrated Array Tunnel Magnetoresistance Sensors

Deep Defects Evaluation of Conductive Materials Based on Eddy Current Nondestructive Testing with GMR sensor

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Analytical Model for Eddy Current Testing of Thickness of Multi-layered Structures and Experimental Verification

Mutual inductance model of double printed circuit board‐based coplanar rectangular spiral coils for eddy‐current testing

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Research on key technology of eddy current testing system based on GMR transducer

Eddy Currents Probe Design for NDT Applications: A Review

Simulation Analysis of Eddy Current Testing Parameters for Surface and Subsurface Defect Detection of Aviation Aluminum Alloy Plate

Detection of Surface and Back-Surface Defects on Metal Plate via Rectangular Wave Eddy Current Testing Using Magnetoresistive Sensor

Eddy-Current Nondestructive Inspection with Thin Spiral Coils: Long Cracks in Steel

Simple Giant Magnetoresistance Probe Based Eddy Current System of Defect Characterization for Non-Destructive Testing

A sophisticated design of copper core to converge rotating eddy current control for detecting cracks in conductive materials

Radial Field Detector to Improve Sensitivity of Localized Defects in Remote Field Eddy Current Technique