Elucidating the mass transfer mechanism of CrVI adsorption by encapsulated chitosan-carbon nanotubes-iron beads in packed-bed columns

Mian Muhammad Ahson Aslam,Walter Den,Hsion-Wen Kuo

DOI: https://doi.org/10.1016/j.jwpe.2022.102586

IF: 7

2022-04-01

Journal of Water Process Engineering

Abstract:This study evaluates the CrVI breakthrough behaviors of a continuous-flow column packed with composite chitosan-MWCNTs‑iron beads under various operating conditions. Under the tested range of experimental parameters, a maximum of 54% of CrVI removal was achieved at: water flow rate, 1 mL/min, feed CrVI concentration, 30 mg/L; and packed bed height 8 cm. A homogeneous surface diffusion model (HSDM) involving convection-dispersion and diffusion equations was formulated, numerically solved, and experimentally validated. The high degree of conformity between the calculated and experimental breakthrough curves facilitated the determination of mass transfer parameters including axial dispersion D L , (1.30 × 10−8 to 1.56 × 10−7 m2/s) and surface diffusion D s , (7.28 × 10−11 to 1.80 × 10−10 m2/s) via an error minimizing approach. The D L value was a function of molecular diffusion, which varied with the flow velocity, mass loading, and bed height. The D s values were slightly higher than those previously reported, owing to the heterogeneous nature of the adsorbent. The external film diffusion coefficient (k f ) was also determined by using Wilson-Geankoplis empirical correlation, which was recognized as a rate-controlling factor during CrVI mass transfer to the adsorbent beads. Furthermore, sensitivity analysis showed that a transition from diffuse- to shock-front occurred with a decreasing D L , while a decrease in the slope of breakthrough curves was observed by decreasing D s and bed porosity, and increasing k f and Langmuir parameters. Lastly, the study demonstrated a high correlation between utilization of fractional bed capacity and axial Peclet number. This method is suitable for optimizing operating conditions to maximize the utilization of a fixed-bed columns.

engineering, chemical, environmental,water resources