Abstract:Micro-X-ray absorption near-edge structure (m-XANES) spectroscopy has been used by several recent studies to determine the oxidation state and coordination of iron in silicate glasses. Here, we present new results from Fe m-XANES analyses on a set of 19 Fe-bearing felsic glasses and 9 basaltic glasses with known, independently determined, iron oxidation state. Some of these glasses were measured previously via Fe XANES (7 rhyolitic, 9 basaltic glasses; Cottrell et al. 2009), while most felsic reference glasses (12) were analyzed for the first time. The main purpose of this study was to understand how small changes in glass composition, especially at the evolved end of silicate melt compositions occurring in nature, may affect a calibration of the Fe m-XANES method. We performed Fe m-XANES analyses at different synchrotron radiation sources [Advanced Photon Source (APS), Argonne, U.S.A., and Angströmquelle Karlsruhe (ANKA), Germany] and compared our results to existing calibrations obtained at other synchrotron radiation sources worldwide. The compiled results revealed that changes in instrumentation have a negligible effect on the correlation between the centroid energy of the Fe pre-edge peak and the Fe oxidation state in the glasses. Oxidation of the glasses during extended exposure (up to 50 min) to the X-ray beam was not observed. Based on the new results and literature data we determined a set of equations for different glass compositions, which can be applied for the calculation of the iron valence ratio (Fe3+/ΣFe) in glasses by using XANES spectra collected at different synchrotron beamlines. For instance, the compiled felsic reference material data demonstrated that the correlation between the centroid energy of the Fe pre-edge peak CFe (eV) and the Fe3+/ΣFe ratio of felsic glasses containing 60.9 to 77.5 wt% SiO2 and 1.3 to 5.7 wt% FeOtot can be accurately described by a single linear trend, if the spectra were collected at 13-ID-E beamline at APS and for 0.3 ≤ Fe3+/ΣFe ≤ 0.85: CFe [eV] = 0.012395 (±0.00026217) × Fe3+/ΣFe + 7112.1 (±0.014525); R2 = 0.987. Based on this equation, the Fe oxidation state of felsic glasses can be estimated at an absolute uncertainty of ±2.4% Fe3+/ΣFe. In general, the differences between the calibrations for felsic and mafic glasses were small and the compiled data set (i.e., results collected at four different beamlines on 79 reference glass materials) is well described by a single second-order polynomial equation.

Assessment of Transition Element Speciation in Glasses Using a Portable Transmission Ultraviolet–Visible–Near-Infrared (UV-Vis-NIR) Spectrometer

Submicrometer-scale spatial heterogeneity in silicate glasses using aberration-corrected scanning transmission electron microscopy

Ultraviolet and Visible Transmission Spectra of Heavy Germanate Glasses Containing Sn2+ and Ce3+

Engineering Materials for Mid-Infrared Optical Sensor Applications

Non-bridging Oxygen Dependent Redox and Spectroscopic Properties of Cu Species in Phosphosilicate Glasses

Spectroscopy of Transition-Metal Ions in Inorganic Glasses

Spectrophotometric analysis of ferrous, ferric and total iron content in soda-lime-silica glass

Quantitative Infrared Spectroscopy of Environmentally Sensitive and Rough Materials.

Monolithic Miniature Glass Spectrometer.

Microbeam characterization of corning archeological reference glasses: New additions to the Smithsonian Microbeam Standard collection

Integrated Photonics for Infrared Spectroscopic Sensing

Infrared emissivity spectroscopy of a soda-lime silicate glass up to the melt

Investigating cerium redox changes between aluminosilicate glass and melt: A multispectroscopic approach

Determination of the extinction coefficients of CR-39, MR-8, and MR-10 organic glasses in the near-ultraviolet to visible region

Holistic Assessment of NIR-Emitting Nd3+-Activated Phosphate Glasses: A Structure-Property Relationship Study

Raman Spectrometry, a Unique Tool to Analyze and Classify Ancient Ceramics and Glasses

Calibration of Fe XANES for high-precision determination of Fe oxidation state in glasses: Comparison of new and existing results obtained at different synchrotron radiation sources

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Multi-spectroscopic characterization system for cultural heritage materials analysis (SYSPECTRAL): Conception and example

Glass-Transition Process in an Au-Based Metallic Glass

Critical assessment of the elemental composition of Corning archeological reference glasses by LA-ICP-MS