Abstract:A printed electronics route for integration of ultrathin chips (chip‐scale) and nanowires (nanoscale) based electronic layers on the same flexible substrate is reported. Direct transfer printing is used for the integration of the ultrathin chips, contact printing is utilized for the integration of the nanowires‐based layers, and the direct ink write method is used for the fabrication of the electrodes/interconnects. Flexible hybrid electronics (FHE) offers potential for fast computation and communication needed in applications such as human–machine interfaces, electronic skin, etc. FHE typically comprises devices that can vary from nano‐ to chip scale, and their integration using a common process is often challenging. Herein, a printed electronics route is presented to integrate the ultrathin chips (chip‐scale) and nanowires (NWs)‐based electronic layers (nanoscale) on the same substrate. The fabrication process is categorized into three stages: i) direct transfer printing of ultrathin chips (UTCs), ii) contact printing of nanoscale structures, and iii) metal printing using the direct ink write (DIW) method to define electrodes/interconnects. The UTC printing process is carefully optimized by studying the performance of transistors present on them. Electrical data collected from 14 transistors located on 3 different chips show negligible variation in performance after they are transfer printed—thus confirming the efficacy of the printing technique. The superior grade quality of ZnO‐NWs‐based electronic layers printed on the same substrate is also demonstrated by constructing UV photodetectors using DIW printing. The photodetectors show high responsivity (≈2 × 107 A W−1) and specific detectivity (≈5 × 1015 Jones) at a low UV intensity of 0.5 μW cm−2.

Surface-controlled contact printing for nanowire device fabrication on a large scale

Wafer-Scale Assembly of Semiconductor Nanowire Arrays by Contact Printing

Optical Control with Large-Scale Assembly of Highly Aligned Silver Nanowires

Plasmon-driven Nanowire Actuators for On-Chip Manipulation

Nanowire Surface Fastener Fabrication on Flexible Substrate

Direct Chemisorption-Assisted Nanotransfer Printing with Wafer-Scale Uniformity and Controllability

Nanoimprint Lithography and Surface Modification As Prospective Technologies for Heterogeneous Integration

Identification of novel indanylsulfonamide guanylhydrazones as potent 5-HT6 serotonin receptor antagonists.

Strategies for the AFM based manipulation of silver nanowires on a flat surface.

On-Wire Lithography

Unprecedented Uniform 3D Growth Integration of 10-Layer Stacked Si Nanowires on Tightly Confined Sidewall Grooves

Rapid Fabrication of High-Resolution Flexible Electronics Via Nanoparticle Self-Assembly and Transfer Printing.

Inkjet Printing of Nanoscale Functional Patterns on 2D Crystalline Materials and Transfer to Soft Materials

Printing of Nano‐ to Chip‐Scale Structures for Flexible Hybrid Electronics

Writing of nanowires via high viscosity-induced nano diffusive layer

Scalable Alignment of CdS Nanowires Based on Efficient Roll-on Transfer Technique.

Direct writing of suspended nanowires using coaxial electrohydrodynamic jet with double tip assistance

Retracted: Combined Printing of Highly Aligned Single‐Walled Carbon Nanotube Thin Films with Liquid Metal for Direct Fabrication of Functional Electronic Devices

Blending of nanoscale and microscale in uniform large-area sculptured thin-film architectures

Creation of Nanostructures with Poly(methyl Methacrylate)-Mediated Nanotransfer Printing.

Advanced Printing Transfer of Assembled Silver Nanowire Network into Elastomer for Constructing Stretchable Conductors