Abstract:This article explores the possibilities and conditions of combustion in a pressurized water reactor of its own accumulated minor actinides (MA). The simplest computational model is used: an infinitely extended medium with the distribution and composition of all materials of the fuel assembly of the reactor core, similar to VVER-1200, with uranium dioxide having an initial 235U enrichment of 4.95%. The burnup model is presented in the form of iterations, each of which simulates a fuel campaign lasting 4 years without refueling. At the start of the cycle, special fuel rods are loaded with minor actinides extracted from the reprocessed SNF of the VVER-1200 reactor. After the end of the fuel campaign, all the MAs are removed from the SNF and used in a new iteration. As a result of calculations, it was found that the MA mass in the cycle after 3–7 iterations (depending on the number of fuel elements allocated for the placement and accumulation of MAs) tends to an equilibrium state (regardless of the MAs added every 4 years). In other words, the fuel rods allocated for loading MAs play the role of a kind of furnace, into which, in each iteration, MAs from the previous iteration accumulated in the given reactor are loaded. After several iterations, the burned MA mass converted into fission products is compared with the incoming one. The inclusion of MAs in this way into the fuel cycle converts at least 86% of MAs into fission products without affecting the power generation of the nuclear power plant. It is important that MAs are temporarily unloaded from the reactor after the next iteration in order to remove fission products and to add a new portion of MAs. After stopping the reactor operation, about 16% of the total amount of MAs generated for the entire history of the reactor's life is discharged into the storage facility. The initial fuel composition in the fuel rods allocated for loading MAs differs from the others only in the amount of MAs and the mass of 238U. The simplified computational model used in this work (without annual overloads of the reactor) influenced the burnup depth and, naturally, the duration of operation, i.e., the k∞ value becomes less than 1 after 1056 days instead of the actual 1460 days with annual fuel overloads. This affected the average fuel composition and, consequently, the neutron spectrum, and could affect the main result of the work, i.e., the number of burned-out MAs in different iterations. Additional calculations, taking into account the annual overloads of the reactor, showed that the change in the spectral composition had little effect on the amount of MAs at the end of the fuel campaign (within 2%). It turned out that the replacement of 238U with minor actinides in fuel rods, the number of which is less than 10, leads to a loss of reactivity. When the number of fuel rods for loading MAs is more than 10, the reactivity increases, giving hope for burning up MAs accumulated in several reactors.

ON THE ISSUE OF ACCUMULATION AND REACTOR UTILIZATION OF AMERICIUM IN THE NUCLEAR POWER

Some economic aspects of reducing americium production in a two-component system of thermal and fast reactors

Americium Transmutation in the SVBR-100 Reactor

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

The main problems of transmutation of actinides and long-lived fission products from NPP spent fuel

Utilization of spent nuclear fuel and transuranic actinides in a two-component nuclear power industry

Achievability of radiological equivalence associated with closed nuclear fuel cycle with fast reactors: impact of uncertainty factors in scenarios of Russian nuclear power development through to 2100. Part 2. Migration of radionuclides

THE POSSIBILITY OF REFINING PLUTONIUM IN THE BN-800

Possible ways to solve the problems of using MOX fuel in thermal reactors

Improving the Utilization of Nuclear Resources

Physical aspects for involvement of thermonuclear reactors into nuclear power systems

Neutron radiation characteristics of the IVth generation reactor spent fuel

Some aspects of the use of steel during out of reactor storage and transportation of spent nuclear fuel. (Review)

New approaches to the separation and concentration of americium in high oxidation forms for the fractionation of high-level waste

Potentials in "nonproliferating" nuclear fuel: Design and implications on a PWR fuel cycle

BN-800: Spent Fuel Dose Rates and the Plutonium Management and Disposition Agreement

Minor Actinides Transmutation in Pressurized Water Reactors. 1. Multiple Recycling of Minor Actinides on the Example of One VVER Reactor

Possibility assessment for production of non-traditional nuclear fuel in thorium blanket of hybrid thermonuclear reactor

Role of fast sodium reactors in closure of the nuclear fuel cycle in the nuclear power system

Utilising 241Am as burnable poison in proliferation resistant PWR

Nuclear Energy Sustainability and MOX Fuel: Global Scenarios Evaluations up to 2050