Abstract:The pressurized slurry is the essential part of the slurry pressure balanced shield (SPBS) for stabilizing the working face and transporting the excavated soil. If clogging occurs in case of adverse ground conditions or equipment failure, a series of consequences will happen, such as sudden changes in slurry pressure, massive ground loss, and deformation or even collapse at tunnel workface. The present study reviewed and summarized the clogging mechanism of the slurry shield under different ground conditions. Then, based on the law of conservation of mass and Bernoulli's Equation, an analytical approach was developed to investigate the effects of clogging on the slurry velocity and pressure along with the deformation of tunnel workface. Furthermore, a case study and field measurements were conducted to validate the analytical method. The significant findings drawn from the study can be summarized as follows: (1) The clogging of a slurry shield imposes severe effects on the slurry pressure balancing mechanism of shield tunneling. It can occur in both cohesive and non-cohesive ground with different formation mechanisms. (2) During the initial clogging, the slurry pressure above the spring line increases, and that below the spring line decreases. With the clogging deteriorating, the slurry velocity drops considerably at the top of the deposit area and escalates near the discharging port. The presence and increase of deposit lead to a sharp rise of slurry pressure in the slurry chamber, especially in the clogging region. (3) The reverse circulation of the slurry system (RCSS) is useful to clear the clogging. Still, the slurry deposits at the bottom will obstruct the slurry reverse flow, resulting in inward deformation of the tunnel face and a drastic increase in overcutting volume. (4) The ultimate volume deviation ratio of the slurry was proposed as a useful index to alarm the potential risk of collapse induced by the RCSS. (5) The timely adoption of RCSS is strongly suggested when any abnormal changes in the slurry pressure or the ultimate volume deviation ratio are observed for the first time.

Clogging Risk Early Warning for Slurry Shield Tunneling in Mixed Mudstone–Gravel Ground: A Real-Time Self-Updating Machine Learning Approach

Monitoring and analysis of deformations and movements of slurry shield tunnel linings

RISK ANALYSIS AND CONTROL FOR SLURRY SHIELD UNDER-PASSING EMBANKMENT

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Predictive control of slurry pressure balance in shield tunneling using diagonal recurrent neural network and evolved particle swarm optimization

Analytical study and field investigation on the effects of clogging in slurry shield tunneling

Prediction of geology condition for slurry pressure balanced shield tunnel with super-large diameter by machine learning algorithms

Prediction of lining upward movement during shield tunneling using machine learning algorithms and field monitoring data

Predicting Slurry Pressure Balance with a Long Short-Term Memory Recurrent Neural Network in Difficult Ground Condition

Unfavorable geology recognition in front of shallow tunnel face using machine learning

Prediction of Maximum Upward Displacement of Shield Tunnel Linings During Construction Using Particle Swarm Optimization-Random Forest Algorithm

A multistage model for rapid identification of geological features in shield tunnelling

Intelligent Analysis of Construction Costs of Shield Tunneling in Complex Geological Conditions by Machine Learning Method

Predicting Model of Dual-Mode Shield Tunneling Parameters in Complex Ground Using Recurrent Neural Networks and Multiple Optimization Algorithms

Prediction of Shield Jamming Risk for Double-Shield TBM Tunnels Based on Numerical Samples and Random Forest Classifier

Precise Cutterhead Clogging Detection for Shield Tunneling Machine Based on Deep Residual Networks

A Coupled Deep Learning Approach for Shield Moving Performance Prediction of Underground Tunnel Construction

Prediction of the slurry pressure and inversion of formation characteristics based on a machine learning algorithm during tunnelling in a fault fracture zone

Geological challenges of tunnelling using large slurry shield machine in dense urban centre

Shield machine position prediction and anomaly detection during tunnelling in loess region using ensemble and deep learning algorithms

An AIoT-based system for real-time monitoring of tunnel construction